What does the error code ER 2 mean on the Fysic FB150 blood pressure monitor?

Q: What does the error code ER 2 mean on the Fysic FB150 blood pressure monitor?

ER 2 means that the blood pressure monitor did not detect the pulse or could not calculate the blood pressure correctly. Before contacting support, check the following points: Cuff connections - Ensure that the cuff tube is fully inserted into the device's connection socket Cleanliness - Clean the tube connector and the cuff connection port on the device to remove any dust or debris Cuff position - Make sure the cuff is positioned correctly, 2-3 cm above the elbow Immobility - Remain still during the measurement to allow for correct pulse detection If the error persists after these checks and cleanings, the device will need to be returned to the distributor for professional servicing.

Question

Accepted Answer

ER 2 means that the blood pressure monitor did not detect the pulse or could not calculate the blood pressure correctly.

Before contacting support, check the following points:

Cuff connections - Ensure that the cuff tube is fully inserted into the device's connection socket
Cleanliness - Clean the tube connector and the cuff connection port on the device to remove any dust or debris
Cuff position - Make sure the cuff is positioned correctly, 2-3 cm above the elbow
Immobility - Remain still during the measurement to allow for correct pulse detection

If the error persists after these checks and cleanings, the device will need to be returned to the distributor for professional servicing.

User manual Fysic Sphygmomanometer : user manuals and guides in PDF

Models Fysic Sphygmomanometer most viewed

Other categories Fysic

Recent questions about Sphygmomanometer Fysic