What should I do if a fault light comes on the steam generator?

Q: What should I do if a fault light comes on the steam generator?

If a fault light comes on your Braun CareStyle 3 IS 3044 , it generally indicates a problem that requires intervention. Here are the checks to perform: Main Checks Water Level - Check the transparent tank (1.5 L) and add demineralized water or a mixture of tap water / demineralized water in equal parts if the level is low. Overheating - Turn off the device and let it cool for 30 minutes before turning it back on. Clogged Steam Circuit - If the light persists despite sufficient water, perform a descaling: pour a mixture of water and white vinegar (1/3 vinegar, 2/3 water) into the tank and run the cycle until exhausted, then rinse thoroughly with pure water. Properly Plugged In - Ensure that the cable (1.8 m) is properly connected to a functional outlet. System Reset After a complete descaling cycle, hold down the descaling button to reset the light. The device has an integrated overheating protection and an automatic shut-off after 8 minutes of inactivity for your safety. If the fault light persists after these checks, contact Braun customer service for a technical inspection.

Question

Accepted Answer

If a fault light comes on your Braun CareStyle 3 IS 3044, it generally indicates a problem that requires intervention. Here are the checks to perform:

Main Checks

Water Level - Check the transparent tank (1.5 L) and add demineralized water or a mixture of tap water / demineralized water in equal parts if the level is low.
Overheating - Turn off the device and let it cool for 30 minutes before turning it back on.
Clogged Steam Circuit - If the light persists despite sufficient water, perform a descaling: pour a mixture of water and white vinegar (1/3 vinegar, 2/3 water) into the tank and run the cycle until exhausted, then rinse thoroughly with pure water.
Properly Plugged In - Ensure that the cable (1.8 m) is properly connected to a functional outlet.

System Reset

After a complete descaling cycle, hold down the descaling button to reset the light. The device has an integrated overheating protection and an automatic shut-off after 8 minutes of inactivity for your safety.

If the fault light persists after these checks, contact Braun customer service for a technical inspection.

User manual BRAUN Steam generator : user manuals and guides in PDF

Models BRAUN Steam generator most viewed

Other categories BRAUN

Recent questions about Steam generator BRAUN