Q: What does the "SAVE" indication on the control panel of the ZIBRO LC-32 kerosene heater mean?

The "SAVE" indication on the control panel of the ZIBRO LC-32 kerosene heater refers to an economy button that activates a temperature limitation function. It is not just a generic energy-saving feature, but a precise automatic regulation mode that allows the heater to operate more efficiently and in a controlled manner. When you activate the SAVE function by pressing the corresponding button, a SAVE indicator light turns on on the control screen. From that moment on, the heater operates according to an automatic cycle system: it automatically turns off as soon as the ambient temperature exceeds the desired temperature by 3°C (the temperature you set via the thermostat). When the room temperature drops back to the desired temperature, the heater automatically turns back on. This operation in SAVE mode is particularly useful in several situations: when you are not present in the room for an extended period, at night when full temperature is not necessary, or to maintain a minimum temperature in the “frost-free” position (protection against freezing of pipes and plumbing in case of winter absence). By avoiding continuous operation at full power, this function significantly reduces your kerosene consumption. Without the SAVE function, your heater also maintains the desired temperature, but by continuously adjusting its heating capacity (modulation). The difference with SAVE is that the latter mode uses a more efficient automatic on/off cycle system for certain usage contexts, leading to potentially greater savings in consumption. To deactivate this function, simply press the SAVE button again: the indicator light will turn off and the heater will return to its standard power modulation regulation mode.

Q: What does the "extension" function mean on the control panel of the ZIBRO LC-32 oil stove?

The "extension" function on the control panel of the ZIBRO LC-32 oil stove corresponds to an option that allows extending the heating duration beyond the initially programmed time. Specifically, this function is used to: Extend the heating period without having to manually reprogram the stove. Maintain a comfortable temperature longer, for example during a cooler evening. Optimize comfort by adjusting the heating duration according to specific needs. To activate this function, you generally just need to press the corresponding button on the control panel. Once activated, the stove continues to operate for the defined extension period and then stops automatically. This function is particularly useful to avoid having to relight or reprogram the stove multiple times during the day or night.

Question 1

How to start the ZIBRO LC-40 oil heater?

Accepted Answer

To start your ZIBRO LC-40 oil heater, follow these simple steps:

Check the fuel level: Make sure the tank has enough oil for operation.
Turn on the device: Turn the ignition button to the "ON" position.
Set the temperature: Adjust the thermostat to the desired temperature.
Start the burner: Press the start button. You should hear a click indicating that the burner is igniting.
Wait: Allow a few minutes for the device to heat the ambient air.

If the heater does not start or encounters difficulties, check that the tank is filled and that the controls are properly set. Regular maintenance can also prevent starting issues.

Question 2

What does error code E2 mean on the ZIBRO LC-150 boiler and how can I resolve this issue?

Accepted Answer

The error code E2 on the ZIBRO LC-150 oil boiler indicates a problem with the ignition of the device. This malfunction causes the heating to automatically stop shortly after it has started.

This error code can have several causes related to fuel supply, the ignition circuit, or combustion quality. You need to check various elements to identify the exact cause. Start with simple checks: check the oil level in the tank, which should contain enough fuel for ignition, inspect the fuel supply pipes and connections to ensure they are properly connected and free of leaks, check the condition of the oil filter and clean or replace it if it is clogged, and ensure you are using high-quality, pure, and water-free oil, in accordance with TOYOTOMI recommendations.

If these checks are not sufficient, more technical interventions may be necessary. The combustion chamber and injector may be clogged after a long period of use or due to poor fuel. Disassemble the fuel supply circuit and blow through the pipes while passing a fine metal wire to remove residues. The flame sensors (ignition electrodes) may also be reversed, damaged, or poorly connected - check their positioning and integrity.

If after these interventions the E2 error persists, it may indicate a failure of internal components such as the fuel pump, the control electronic board, or the ignition transformer. In this case, contact your authorized dealer or a qualified professional for a complete diagnosis and appropriate repair. Do not attempt repairs if you do not feel comfortable with these technical manipulations.

Question 3

What does the 'Key Lock' function on the control panel of the ZIBRO LC-32 oil stove mean?

Accepted Answer

The 'Key Lock' function on the control panel of the ZIBRO LC-32 oil stove corresponds to the locking of the buttons. It is a safety measure that prevents any accidental changes to the device's settings.

When the Key Lock is activated:

The control buttons are disabled.
It is impossible to change settings such as temperature or operating mode.

This function is particularly useful to avoid unintentional manipulations, especially in households with children.

To deactivate or activate this lock, you generally need to hold down a specific button for a few seconds (check the control panel to identify the corresponding key), which helps protect the settings while ensuring safe use of the stove.

Question 4

What does the "SAVE" indication on the control panel of the ZIBRO LC-32 kerosene heater mean?

Accepted Answer

The "SAVE" indication on the control panel of the ZIBRO LC-32 kerosene heater refers to an economy button that activates a temperature limitation function. It is not just a generic energy-saving feature, but a precise automatic regulation mode that allows the heater to operate more efficiently and in a controlled manner.

When you activate the SAVE function by pressing the corresponding button, a SAVE indicator light turns on on the control screen. From that moment on, the heater operates according to an automatic cycle system: it automatically turns off as soon as the ambient temperature exceeds the desired temperature by 3°C (the temperature you set via the thermostat). When the room temperature drops back to the desired temperature, the heater automatically turns back on.

This operation in SAVE mode is particularly useful in several situations: when you are not present in the room for an extended period, at night when full temperature is not necessary, or to maintain a minimum temperature in the “frost-free” position (protection against freezing of pipes and plumbing in case of winter absence). By avoiding continuous operation at full power, this function significantly reduces your kerosene consumption.

Without the SAVE function, your heater also maintains the desired temperature, but by continuously adjusting its heating capacity (modulation). The difference with SAVE is that the latter mode uses a more efficient automatic on/off cycle system for certain usage contexts, leading to potentially greater savings in consumption.

To deactivate this function, simply press the SAVE button again: the indicator light will turn off and the heater will return to its standard power modulation regulation mode.

Question 5

What does the "extension" function mean on the control panel of the ZIBRO LC-32 oil stove?

Accepted Answer

The "extension" function on the control panel of the ZIBRO LC-32 oil stove corresponds to an option that allows extending the heating duration beyond the initially programmed time.

Specifically, this function is used to:

Extend the heating period without having to manually reprogram the stove.
Maintain a comfortable temperature longer, for example during a cooler evening.
Optimize comfort by adjusting the heating duration according to specific needs.

To activate this function, you generally just need to press the corresponding button on the control panel. Once activated, the stove continues to operate for the defined extension period and then stops automatically.

This function is particularly useful to avoid having to relight or reprogram the stove multiple times during the day or night.

Question 6

What does error code E6 mean on a ZIBRO LC-30 oil heater and how can it be resolved?

Accepted Answer

The error code E6 on your ZIBRO LC-30 oil heater indicates a problem with poor combustion. This code appears on the digital display when the combustion chamber is not functioning properly. Before contacting a professional, several checks and cleaning operations can resolve this issue.

First step: check the quality of the fuel. Your device must operate exclusively with high-quality, pure, and water-free kerosene (1-K). Poor quality fuel causes incomplete combustion and can trigger error E6. Completely empty the tank and refill it with new, high-quality fuel. Avoid using fuel that has been stored for more than one season, as it ages and loses its qualities.

Second step: clean the ventilation filter and the grille. Turn off the device and let it cool down. Clean the ventilation filter (part 8) with a vacuum cleaner on a weekly basis. Wipe the lower grille (part 2) with a damp cloth. Dust accumulations block the airflow necessary for good combustion.

Third step: inspect and clean the fuel filter. Remove the removable tank (part 6) from the device. Clear the fuel filter (part 1) by taking it out of the tank. A few drops may spill: keep a cloth nearby. Gently tap the filter upside down against a hard surface to remove impurities. Never wash it with water. Reinstall the filter in the tank and put the tank back in place. This operation is crucial if your device has not been cleaned for a long time.

Fourth step: check the room ventilation. The device has an oxygen deficiency detector that can generate error E6 if ventilation is insufficient. Ensure that the room is properly ventilated, especially during operation. An open window or adequate ventilation is essential for proper functioning.

Fifth step: restart the device. After these checks and cleanings, turn off the heater completely, wait a few minutes, and then turn it back on. The digital display will show a flashing ignition indicator before stabilizing. If the E6 code disappears, the problem was resolved. Note that the device automatically performs an internal cleaning after 2 hours of operation at maximum power.

If the error code E6 persists after all these steps, it indicates a technical problem with the combustion chamber, burner, or ignition electrode that requires the intervention of a qualified professional. Contact your ZIBRO dealer or an authorized repairer for a safe diagnosis and repair.

Question 7

How to set the temperature on a ZIBRO LC-32 oil heater?

Accepted Answer

To set the temperature on your ZIBRO LC-32 oil heater, the device must first be operating. The adjustment can only be made during the heater's combustion.

Available temperature range: You can set the temperature between 6°C (minimum) and 28°C (maximum). The ZIBRO LC-32 has a digital display that shows two values simultaneously: ROOM (current measured ambient temperature) and SET (desired temperature that you set).

Adjustment procedure: Use the two adjustment buttons located on the control panel. Press the right button (marked "min.") to increase the temperature, or the left button (marked "hour") to decrease it. Each press changes the temperature by one degree. After about 10 seconds without action, the display stops flashing and your selection is automatically saved.

The ZIBRO LC-32 includes a SAVE function (economy mode) that automatically limits the temperature. When this mode is activated, the heater automatically turns off as soon as the ambient temperature exceeds your set temperature by 3°C. When the room cools down and returns to the desired temperature, the heater automatically turns back on. Without this SAVE function, the device maintains the temperature by remaining active within a specified range.

Important: In case of a power outage or disconnection of the heater, the temperature defaults to 20°C and the settings must be redone using the adjustment buttons. Also, check that the oil tank contains enough fuel (oil/kerosene) for the heater to operate properly.

Question 8

How to increase the displayed temperature on the ZIBRO LC-132 oil heater?

Accepted Answer

To increase the displayed temperature on your ZIBRO LC-132 oil heater, follow these simple steps:

Locate the control panel of the device where the adjustment buttons or dial are located.
Identify the button or control that allows you to adjust the temperature. On this model, it is usually a button or dial located at the front.
Increase the temperature by turning the dial clockwise or by pressing the increase button. You should see the first digit of the digital display increment.
Monitor the display to ensure that the desired temperature is selected.
Wait a few minutes for the heater to reach the newly set temperature.

If the temperature does not adjust or if you encounter difficulties, make sure the device is turned on and in adjustment mode. If the problem persists, a technical check may be necessary.

Question 9

Why does the ZIBRO LC-132 oil heater not display a temperature higher than 9°C at startup?

Accepted Answer

The display of 9°C at startup of your ZIBRO LC-132 does not mean that the device is limited to this temperature. In reality, it measures and displays the current actual temperature of your room (marked ROOM on the screen), which is indeed around 9°C or below.

The LC-132 has a dual digital display that presents two distinct pieces of information:

ROOM: the ambient temperature measured in real-time by the device's sensor
SET: the target temperature you have programmed (adjustable from 6°C to 28°C)

At startup, the device begins by displaying the current temperature of the room. If you see 9°C, it means your room is actually cold at that moment. For the heater to operate and gradually warm the space, you must first set a SET value higher than the current temperature (for example, 20°C or 22°C) by pressing the adjustment buttons.

Once the SET value is correctly set, the device activates and generates heat. The measured temperature (ROOM) will then gradually increase until it reaches the SET value you have chosen. This warming delay depends on the volume of the room, its insulation, and the selected heating power (0.8 to 3.2 kW).

If after a sufficient time (30 to 60 minutes depending on the size of the room) the temperature does not rise and remains stuck at 9°C despite a much higher SET value, check that the device is functioning normally: fuel present in the tank, no alert codes on the screen, and proper ventilation of the room (sufficient ventilation required for safety and proper operation).

Question 10

How to ventilate a room with a ZIBRO LC-130 oil heater without cooling the room and feeling cold?

Accepted Answer

Ventilation is essential with your TOYOTOMI LC-130, as it prevents the accumulation of carbon monoxide and allows the automatic detection system to function properly. The manual states, "ALWAYS ventilate sufficiently," and if ventilation is insufficient, the VENT indicator blinks on the screen and the heater automatically shuts off. For this reason, it is crucial to ventilate regularly, even if it seems contrary to thermal comfort.

To ventilate effectively without significantly cooling the room, the manufacturer recommends opening a door or window slightly, with an opening of about 2.5 cm, kept open continuously while the device is running. This small opening ensures sufficient air renewal without creating a major cold draft. This is particularly important if your room is smaller than the minimum recommended 48 m³ for the LC-130 (the device is designed to heat from 48 to 120 m³).

Respect the minimum air openings: you need at least 50 cm² of opening for fresh air intake and 50 cm² for exhaust air. A simple gap of 2.5 cm (like a slightly ajar door or window) is enough to ensure this circulation. Never completely block these air passages, otherwise the CO2 detection system will activate.

To minimize the feeling of cold, schedule your ventilation during low activity hours (when you are not in the room, or at night if you can tolerate it). Set the thermostat of the LC-130 to a comfortable temperature (6°C to 28°C possible): after ventilation, the heater will quickly raise the temperature as its power reaches 3.0 kW at maximum. Avoid ventilating just after reducing the heating.

Use the SAVE function to optimize your comfort: this function limits consumption by automatically turning off the heater when the temperature exceeds the set threshold of 3°C, then restarts it when it drops. During periods when you tolerate continuous ventilation (slightly open doors), this function effectively compensates for heat loss while saving fuel.

Finally, do not wait for the VENT indicator to light up to ventilate. If your room is small, humid, or very insulated, it is better to anticipate by regularly opening the ventilation. The walls of the device remain cold (as indicated in the specifications), which naturally creates air circulation in the room without adding excessive warm air flow.

User manual ZIBRO Kerosene Heaters : user manuals and guides in PDF

Models ZIBRO Kerosene Heaters most viewed

Other categories ZIBRO

Recent questions about Kerosene Heaters ZIBRO