How to assemble the internal part (inner cover) of the ACC3100D system?

Question

Accepted Answer

The internal part of the ACC3100D system (inner cover) is assembled according to the following steps:

Assembly Steps

Cable Routing: Before securing the inner cover, ensure that all electrical cables are properly routed through the designated openings.
Securing the Inner Cover: Attach the inner cover to the heat exchanger using the 4 bolts provided in the mounting kit.
Torque: Use a torque wrench and tighten the bolts to a maximum torque of 1.2 Nm. Do not exceed this value to avoid damaging the component.
Filter Check: Before completing the assembly, check that the filters are properly inserted.
Final Assembly: Then attach the central cover to the inner cover to finalize the internal assembly.

For a safe and compliant installation, it is recommended to entrust this operation to a certified technician with the appropriate skills in ventilation equipment for caravans and motorhomes.

User manual DOMETIC Fan : user manuals and guides in PDF

Models DOMETIC Fan most viewed

Other categories DOMETIC

Recent questions about Fan DOMETIC