Q: How do I know when the Tello battery is fully charged?

The Ryze Tello has a blue LED indicator that signals the battery charge status. This indicator works as follows: Slowly blinking blue : the battery is charging Solid blue (continuously on) : charging is complete To charge the Tello, connect a USB adapter (5 V, 1.5 A minimum) to the device's Micro USB port. The charging time is approximately 1 hour 30 minutes . Make sure the drone is turned off before charging, and adhere to the recommended charging temperature range: 5°C to 45°C.

Q: What is the charging time and method for charging the Tello battery?

Charging time: The Tello battery fully charges in about 1 hour and 30 minutes . Charging method: Connect a USB adapter (not included) to the Micro USB port of the Tello using a standard Micro USB cable. The adapter must be FCC/CE certified and provide at least 5V and 1.5A . The drone must be turned off before charging - it cannot charge while it is operating. Ensure that the battery (capacity 1100 mAh) is properly inserted into the drone before connecting the charger. Charging indicators: During charging, the LED blinks slowly in blue. When charging is complete, the LED turns solid blue.

Question 1

How do I know when the Tello battery is fully charged?

Accepted Answer

The Ryze Tello has a blue LED indicator that signals the battery charge status. This indicator works as follows:

Slowly blinking blue: the battery is charging
Solid blue (continuously on): charging is complete

To charge the Tello, connect a USB adapter (5 V, 1.5 A minimum) to the device's Micro USB port. The charging time is approximately 1 hour 30 minutes. Make sure the drone is turned off before charging, and adhere to the recommended charging temperature range: 5°C to 45°C.

Question 2

What is the charging time and method for charging the Tello battery?

Accepted Answer

Charging time: The Tello battery fully charges in about 1 hour and 30 minutes.

Charging method:

Connect a USB adapter (not included) to the Micro USB port of the Tello using a standard Micro USB cable.
The adapter must be FCC/CE certified and provide at least 5V and 1.5A.
The drone must be turned off before charging - it cannot charge while it is operating.
Ensure that the battery (capacity 1100 mAh) is properly inserted into the drone before connecting the charger.

Charging indicators: During charging, the LED blinks slowly in blue. When charging is complete, the LED turns solid blue.

User manual Ryze Drone : user manuals and guides in PDF

Models Ryze Drone most viewed

Recent questions about Drone Ryze