What does a rapid blinking light on the BWT COSMY 100/150/200/250 pool robot mean and how can it be fixed?

Question

Accepted Answer

A rapid blinking light on your BWT COSMY pool robot (models 100, 150, 200, 250) generally indicates a malfunction or an alert related to its operation. Here are the steps to identify and resolve this issue:

1. Check the filter

Remove the filter from the robot and check if it is clean.
A clogged or dirty filter can prevent the robot from functioning properly and cause a rapid blinking light.
Clean or replace the filter if necessary.

2. Check the power supply

Ensure that the power cable is properly plugged in and in good condition, without cuts or damage.
Check that the electrical outlet is functioning correctly.

3. Inspect the wheels and brushes

Examine the wheels and brushes for any blockages due to debris, algae, or stuck objects.
Carefully clean these components to ensure proper mobility.

4. Restart the robot

Unplug the robot, wait a few minutes, then plug it back in.
Observe if the rapid blinking persists after this restart.

If, after these checks, the rapid blinking continues, it may indicate a more serious technical issue requiring specialized assistance. In this case, it is recommended to contact BWT customer service for appropriate support.

User manual BWT Pool Robot : user manuals and guides in PDF

Models BWT Pool Robot most viewed

Other categories BWT

Recent questions about Pool Robot BWT