All the indicators are flashing and the soundbar is not working

Question

Accepted Answer

If all the indicators are flashing simultaneously and your MAXELL MXSB252BT soundbar is not working, this may indicate several situations:

Initial Checks

Power Supply: Ensure that the power cord (AC 220-240 V) is properly plugged into a functional outlet. Constantly flashing indicators may indicate an unstable power issue.
Reset: Completely unplug the device for 30 seconds, then plug it back in. This resets the internal circuits and may resolve malfunctions.
Bluetooth Pairing Mode: The soundbar automatically enters pairing mode if it does not detect an audio source. In Bluetooth pairing mode, the blue indicator flashes slowly. Try connecting a Bluetooth device or select another input source (optical, RCA, or 3.5 mm jack) to exit this mode.

Additional Actions

Change Source: Press the button corresponding to your input source (optical, RCA, or 3.5 mm line). If no source is available, the soundbar defaults to Bluetooth mode.
Auto Shutdown: The device turns off after 2 minutes without detecting an audio signal. If this is the case, simply send an audio signal to reactivate it.

If after these steps the problem persists and the indicators continue to flash abnormally, there may be a hardware malfunction. In this case, consult the technical service of the manufacturer MAXELL with your model reference MXSB252BT.

User manual MAXELL Soundbar : user manuals and guides in PDF

Models MAXELL Soundbar most viewed

Other categories MAXELL

Recent questions about Soundbar MAXELL