How to adjust the settings on the GEONAUTE KEYMAZE 300 GPS?

Question

Accepted Answer

To access the settings of your GEONAUTE KEYMAZE 300 GPS, turn on the device by pressing the power button. Then press the MODE button repeatedly until you reach the MAIN MENU screen. Use the VIEW/SET arrows to navigate through the menus and press OK to confirm your choices.

The GEONAUTE KEYMAZE 300 offers a CONFIGURATION menu that groups the main settings. You can access it by selecting this option with the VIEW/SET arrows and confirming with OK. This menu includes the following options:

SETUP TIME ZONE: configures the time difference between GPS time (GMT) and your local time zone. Select the proposed offset, modify it with the VIEW/SET arrows, and confirm with OK.
SETUP GPS: allows you to configure the GPS in WAAS/EGNOS mode to improve the accuracy of your recording by using ground relay stations.
SET UNITS: allows you to choose between the metric system (m, km/h) and the STATUTE system (ft, mph) according to your preference.
USER NAME: allows you to enter your username and configure your gender for training data.
LCD CONTRAST: adjusts the contrast of the LCD screen for better visibility.
SET BEEPER: sets the beep sound when pressing the buttons to enable or disable this auditory feedback.

You can also access other navigation functions by selecting NAVIGATION in the MAIN MENU. This section allows you to enable or disable Map mode, manage the GPS (TURN ON/OFF GPS to save battery), set alarms based on time, distance, or speed, and return to your starting point (RETURN TO ORIGINE).

After modifying your settings, the parameters are automatically saved. To exit the configuration menu, press the MODE button several times until you return to the main screen. You can check at any time that your changes have been taken into account by going back to the CONFIGURATION menu.

User manual GEONAUTE Gps : user manuals and guides in PDF

Models GEONAUTE Gps most viewed

Other categories GEONAUTE

Recent questions about Gps GEONAUTE