How to update the INFORAD M1 GPS?

Q: How to update the INFORAD M1 GPS?

To update your INFORAD M1 GPS, you need to use the INFORAD MANAGER software, a Windows application that manages updates to the radar database. This application is essential as the embedded database is regularly updated to keep up with new danger zones and changes to fixed radar locations. Start by downloading INFORAD MANAGER from the official website www.gpsinforad.com. The software works on Windows 98SE or a more recent version. Once the download is complete on your hard drive, launch the file and follow the installation wizard that will guide you step by step. Important: do not connect the USB cable to your computer until expressly prompted by the installation software . During installation, the software will ask you to connect the INFORAD M1 receiver to your PC via the USB cable provided with the device. This is the time when you should make this connection. During this phase, you will need to register the serial number of your device : this registration gives you free access for a full year to database updates. Once the installation is complete and your device is registered, INFORAD MANAGER will automatically detect if updates are available. The software will also allow you to configure alert settings : you can adjust the approach distance (INFORAD alerts you visually 20 seconds before and about 200 meters beyond a fixed radar by default) and add your own danger zones. Refer to the help file integrated into the software to explore all available features. To receive regular updates after the first year of free access, you must keep your device registered with INFORAD and maintain an active Internet connection when connecting to INFORAD MANAGER. If you encounter issues during the download or detection of your device, consult the online help section at www.gpsinforad.com or contact the technical support team directly at support@gpsinforad.com.

Question

Accepted Answer

To update your INFORAD M1 GPS, you need to use the INFORAD MANAGER software, a Windows application that manages updates to the radar database. This application is essential as the embedded database is regularly updated to keep up with new danger zones and changes to fixed radar locations.

Start by downloading INFORAD MANAGER from the official website www.gpsinforad.com. The software works on Windows 98SE or a more recent version. Once the download is complete on your hard drive, launch the file and follow the installation wizard that will guide you step by step. Important: do not connect the USB cable to your computer until expressly prompted by the installation software.

During installation, the software will ask you to connect the INFORAD M1 receiver to your PC via the USB cable provided with the device. This is the time when you should make this connection. During this phase, you will need to register the serial number of your device: this registration gives you free access for a full year to database updates.

Once the installation is complete and your device is registered, INFORAD MANAGER will automatically detect if updates are available. The software will also allow you to configure alert settings: you can adjust the approach distance (INFORAD alerts you visually 20 seconds before and about 200 meters beyond a fixed radar by default) and add your own danger zones. Refer to the help file integrated into the software to explore all available features.

To receive regular updates after the first year of free access, you must keep your device registered with INFORAD and maintain an active Internet connection when connecting to INFORAD MANAGER. If you encounter issues during the download or detection of your device, consult the online help section at www.gpsinforad.com or contact the technical support team directly at support@gpsinforad.com.

User manual INFORAD Gps : user manuals and guides in PDF

Models INFORAD Gps most viewed

Other categories INFORAD

Recent questions about Gps INFORAD