Question 1

How do I set the number of rings before the answering machine on the AT&T CL82307 cordless phone picks up?

Accepted Answer

On your AT&T CL82307 cordless phone, you can set the number of rings before the built-in answering machine picks up. The available options are 2, 3, 4, 5, 6 rings, or the Toll saver option. The latter option is particularly useful if you are calling from a distance: the answering machine picks up after 2 rings if there are new messages, and after 4 rings if there are none.

To set the number of rings, follow these steps on the cordless handset:

Press MENU
Press Y or À to navigate to Answering sys
Press SELECT
Press Y or À to navigate to Ans sys setup
Press SELECT
Press Y or À to navigate to # of rings (number of rings)
Press SELECT
Press Y or À to select the desired number of rings from 2, 3, 4, 5, 6, or Toll saver
Press SELECT to confirm and save your choice

Once this setting is made, your answering machine will wait for the number of rings you configured before picking up and recording messages. If you are also using a voicemail service from your phone provider, make sure that your phone's answering machine is set to at least two rings before your voicemail, to avoid conflicts.

Question 2

How to delete messages on the AT&T CL82307 cordless phone?

Accepted Answer

Your AT&T CL82307 cordless phone allows you to delete messages in two ways depending on your preferences. The instructions vary slightly depending on whether you are using the phone base or the handset.

Deletion via the phone base (fastest method):

Press PLAY/M to start playing the recorded messages
To delete the currently playing message, press DELETE
To delete all old messages at once, press DELETE twice when the phone is idle (no message playing)

Deletion via the cordless handset:

Press MENU twice to access the message playback menu
Listen to the message you wish to delete
Press DELETE to erase the currently playing message

Important points: Deleting a single message is done while it is being played. Old messages are distinct from new messages. If you are not listening to a message, pressing DELETE twice will only erase old messages, not new ones. Playback volumes can be adjusted using the Volume keys on the base (for the base) or on the handset while you are listening.

Question 3

How to set up a conference call on the AT&T CL82307 cordless phone?

Accepted Answer

The AT&T CL82307 cordless phone supports conference calls (three simultaneous conversations) thanks to the Call waiting feature offered by your telephone service provider. This feature allows you to talk with two callers at the same time without needing additional equipment.

Procedure to establish a conference call:

During an ongoing call, press the FLASH button to put the first call on hold and hear a dial tone.
Dial the number of the second caller you wish to add to the conference.
Wait for the second caller to answer the call.
Press the FLASH button again to combine the two calls into a conference and establish the three-way connection.

To manage your conference call:

You can speak with both callers simultaneously once the conference is established.
To switch between calls, press FLASH again during the conference (this temporarily interrupts the conference call).
To remove a specific caller from the conference, put the calls on hold with FLASH, then hang up by pressing the OFF/CANCEL button after switching to the caller you want to disconnect.

Important points: This function requires a subscription to the Call waiting option from your telephone service provider. Check with your operator if this service is activated on your line. The CL82307 features a backlit LCD screen that displays call and directory information, and offers reliable communication range thanks to DECT 6.0 technology.

User manual AT&T Cordless phone : user manuals and guides in PDF

Models AT&T Cordless phone most viewed

Other categories AT&T

Recent questions about Cordless phone AT&T