Question 1

How to identify and use the Main Out on the SOUNDCRAFT SPIRIT FOLIO LITE mixing console?

Accepted Answer

On the SOUNDCRAFT SPIRIT FOLIO LITE mixing console, the main output is called MIX OUTPUT (or simply MIX O/P). Unlike some consoles, it is not explicitly labeled 'Main Out', but it is indeed the main stereo output that routes the complete mixed signal to your speakers, amplifier, or recorder.

Location and identification: The MIX OUTPUT outputs are located on the rear panel of the console. This is a pair of stereo outputs (left and right) on 6.35 mm TRS jack connectors (3 poles: Tip/Ring/Sleeve, equivalent to balanced 6.35mm jacks). They are clearly labeled 'MIX O/P LEFT' and 'MIX O/P RIGHT'. This is the reference output of your mixer, distinct from the Monitor outputs, Aux 1 outputs, or headphone output.

Technical specifications: The MIX OUTPUT outputs of the SPIRIT FOLIO LITE deliver a maximum output level of +21 dBu and have an impedance of 75 Ohms. These outputs feature ground compensation, a built-in function that eliminates ground loops and prevents annoying hums or noises when connecting unbalanced equipment. This feature makes the outputs robust and suitable for most sound reinforcement or recording setups.

How to use them: For sound reinforcement, connect the MIX LEFT and RIGHT outputs to the left and right inputs of your power amplifier, respectively. For recording, plug them into the inputs of your audio interface or tape recorder. Preferably use balanced cables (TRS or XLR) for optimal audio quality and better immunity to interference. If you must use unbalanced cables, prefer short lengths and ensure that the ground is properly connected.

Level adjustment: The overall level of the MIX outputs is controlled by the MIX FADER rotary knob located in the master section of the console. Set it to the 0 dB mark for proper operation once the input levels are well calibrated. Monitor the output signal via the LED bargraph meters (tri-color display): aim for the signal to regularly reach the orange band (0 dB) for stable signals, or up to +6/+9 dB for signals with a lot of transients like percussion or drums.

Do not confuse: The SPIRIT FOLIO LITE also has Monitor outputs (6.35 mm jack) dedicated to monitoring returns, which are automatically cut off when a headphone is plugged in. These outputs are distinct from the MIX OUTPUT outputs and serve a different purpose. The console also has a stereo Master insert (6.35 mm jack) located in the MIX signal chain, before the main fader, allowing for the insertion of a compressor or equalizer in the master if necessary.

Question 2

How to connect the SOUNDCRAFT SPIRIT FOLIO LITE mixer to a computer to record a voice?

Accepted Answer

To connect your SOUNDCRAFT SPIRIT FOLIO LITE mixer to a computer for recording a voice, follow these steps:

1. Prepare the necessary cables

Use an appropriate audio cable, usually a 1/4" (TRS) jack to 3.5 mm (mini-jack) cable or an XLR to USB interface cable depending on your equipment.
If your computer does not have a compatible audio input, you may need to use an external USB audio interface.

2. Connect the mixer to the computer

Locate the main output (Main Out) of the mixer, which may be a 1/4" jack or XLR.
Plug the 1/4" jack cable from the Main Out to the microphone or line input of your computer (3.5 mm jack) if available.
If you are using a USB audio interface, connect the Main Out of the mixer to the input of the interface, then connect the interface to the computer via USB.

3. Configure the recording software

Open your audio recording software (e.g., Audacity, GarageBand, etc.).
In the audio settings, select the input corresponding to the connection used (microphone input, line, or USB audio interface).

4. Perform a recording test

Speak into the microphone connected to the mixer.
Check that the software detects the audio signal and adjust the gain on the mixer to achieve an optimal level without distortion.

5. Record

Once the setup is validated and the sound is properly captured, you can start recording your voice on the computer.

This method allows you to use the sound quality and settings of the SOUNDCRAFT SPIRIT FOLIO LITE mixer for your vocal recordings.

User manual SOUNDCRAFT Mixer : user manuals and guides in PDF

Models SOUNDCRAFT Mixer most viewed

Other categories SOUNDCRAFT

Recent questions about Mixer SOUNDCRAFT