Question 1

Why is my WD My Passport Ultra hard drive recognized but I cannot access its properties?

Accepted Answer

If your WD My Passport Ultra external hard drive is recognized by your computer but you cannot access its properties, several causes may explain this issue. Here are some suggestions to resolve this situation:

1. Check the disk initialization and partition

On Windows, open the Disk Management: right-click on "This PC" then "Manage" and select "Disk Management".
Check if your WD drive appears with a healthy partition. If it is listed as uninitialized or unallocated, you will need to initialize it and create a partition to be able to use it.

2. Check access rights and permissions

Make sure you have administrator rights on your computer, as certain operations on disks require these privileges.
On Windows, right-click on the drive in Explorer, then "Properties" → "Security" tab to check the permissions. If you cannot access this tab, it may indicate a permissions issue or corruption.

3. Check read-only mode

Some models of WD drives may have a physical security switch (rare on this model, but worth checking).
Otherwise, the drive may be mounted in read-only mode due to errors or an incompatible file system.

4. Test on another computer or USB port

To eliminate a problem related to your computer, try connecting the drive to another PC or another USB port.

5. Backup data and format if necessary

If you can access the files but not the properties, back up your important data and then consider a full format of the drive to restore its proper functioning.

By following these steps, you should be able to access the properties of your WD My Passport Ultra. If the problem persists, it may be a hardware defect or significant corruption requiring specialized technical assistance.

Question 2

How to resolve the issue of the WD My Passport Ultra hard drive not being recognized by the computer?

Accepted Answer

If your WD My Passport Ultra is not recognized by your computer, the issue often stems from missing USB drivers rather than a fault with the drive. Here are the troubleshooting steps to follow in order.

Step 1 - Check USB drivers: If your computer has a USB 3.0 or USB 2.0 adapter card, make sure that the USB 3.0 (or USB 2.0) drivers and the host controller and root hub drivers are installed. Without these specific drivers, the drive will not be recognized. Check with your adapter card manufacturer or your computer manufacturer's website to download the missing drivers.

Step 2 - Test the physical connection: Ensure that the USB cable provided with the drive is properly connected at both ends (drive and computer). Try another USB port on your computer, preferably ports located directly on the tower or keyboard, rather than on a USB hub. Also, test with another compatible USB cable to rule out a faulty cable issue.

Step 3 - Test on another computer: Connect the WD My Passport Ultra to another computer to determine if the issue lies with the drive or your machine. The drive's LED (which should remain continuously lit or blink rapidly during access) will indicate if the drive is receiving power.

Step 4 - Check system detection: On Windows, open Disk Management (right-click on "This PC" > "Manage" > "Disk Management") to see if the drive appears, even without a drive letter assigned. On Mac, open Disk Utility. If the drive appears in these tools but not in Explorer, you can assign it a drive letter (Windows) or mount it manually (Mac).

Step 5 - Use WD diagnostic tools: Install the WD Drive Utilities software provided with the drive or downloadable from support.wdc.com. This software allows you to check the drive's status, run diagnostic tests, and determine if a repair is possible. You can also format the drive from this tool if necessary.

If after these steps the drive is still not recognized and the LED does not light up, it is likely a hardware issue. In this case, contact WD support at support.wdc.com for technical assistance or warranty service (the WD My Passport Ultra comes with a 2-year warranty).

Question 3

How to format a WD My Passport Ultra hard drive on Windows and Mac?

Accepted Answer

Formatting the WD My Passport Ultra prepares the drive for storing your data, erases all existing information, or changes the file system for better compatibility. By default, the drive comes preformatted in NTFS for Windows, but you can format it to exFAT to use the drive on both Windows and Mac simultaneously, or to HFS+ journaled if you are using it solely on Mac.

Formatting on Windows 10 and Windows 11:

Connect the WD My Passport Ultra drive to your computer via USB. Ensure that the USB Type-C cable is properly connected (a USB-C to USB-A adapter is included if necessary).
Open File Explorer and locate the drive in the left column or under “This PC”.
Right-click on the drive and select “Format”.
In the formatting window, choose the file system: select NTFS for exclusive Windows use, or exFAT to share the drive between Windows and Mac.
Give the drive a name in the “Volume label” field, then check the “Quick Format” box to speed up the operation.
Click the “Start” button and confirm the warning message. Formatting takes a few seconds to a few minutes depending on the drive's capacity.

Formatting on Mac:

Connect the WD My Passport Ultra drive to your Mac using the included USB Type-C cable.
Open the “Disk Utility” application (found in Applications > Utilities).
In the left column, select the WD My Passport Ultra drive (you will see it appear with its name).
Click the “Erase” button at the top of the window.
Choose a name for your drive, then select the format: use Mac OS Extended (Journaled) if you are only using Mac and want to enable Time Machine, or exFAT for compatibility with Windows.
Click “Erase” to start the process. All data will be deleted.

Important advice: Before formatting, back up all important files on the drive, as formatting permanently deletes all data. If you have other computers, exFAT is the best choice as it works on all operating systems (Windows, Mac, and Linux). After formatting, wait a few seconds before disconnecting the drive to allow your system to save the changes. The WD My Passport Ultra features shock protection and does not require external power, so you can use it immediately once formatted.

User manual WD External hard drive : user manuals and guides in PDF

Models WD External hard drive most viewed

Recent questions about External hard drive WD