The X-COMM app is in French but the X-COMM phone is not, how to synchronize the language?

Q: The X-COMM app is in French but the X-COMM phone is not, how to synchronize the language?

The CROSSCALL X-COMM and its mobile app can have independent language settings. Here’s how to synchronize them: Method 1: Complete reset and reconfiguration On the X-COMM, press 8 times on the Power button (button 9) for a factory reset . This erases all settings and smartphone synchronization. Turn the device back on (hold button 9 for 5 seconds until the green LED). Open the X-COMM app on your phone and reconnect the X-COMM via the QR scan function (Android compatible). During reconfiguration, ensure that the app language is set to French , which should apply to the X-COMM during pairing. Method 2: Simple re-pairing (faster) Ensure that the X-COMM is paired with your phone via Bluetooth or the X-COMM app. Double-press the Power button to switch to silent mode (this may also refresh the connection). Completely turn off the X-COMM and reconnect it via the app. The synchronization of settings (including language) should occur automatically. Note: If the problem persists after a complete factory reset, it may indicate that the software version of the X-COMM requires an update via the X-COMM app, or that a system setting on the phone (system language) is interfering with the language detection of the device.

Question

Accepted Answer

The CROSSCALL X-COMM and its mobile app can have independent language settings. Here’s how to synchronize them:

Method 1: Complete reset and reconfiguration

On the X-COMM, press 8 times on the Power button (button 9) for a factory reset. This erases all settings and smartphone synchronization.
Turn the device back on (hold button 9 for 5 seconds until the green LED).
Open the X-COMM app on your phone and reconnect the X-COMM via the QR scan function (Android compatible).
During reconfiguration, ensure that the app language is set to French, which should apply to the X-COMM during pairing.

Method 2: Simple re-pairing (faster)

Ensure that the X-COMM is paired with your phone via Bluetooth or the X-COMM app.
Double-press the Power button to switch to silent mode (this may also refresh the connection).
Completely turn off the X-COMM and reconnect it via the app.
The synchronization of settings (including language) should occur automatically.

Note: If the problem persists after a complete factory reset, it may indicate that the software version of the X-COMM requires an update via the X-COMM app, or that a system setting on the phone (system language) is interfering with the language detection of the device.

User manual CROSSCALL Mobile Phone : user manuals and guides in PDF

Models CROSSCALL Mobile Phone most viewed

Other categories CROSSCALL

Recent questions about Mobile Phone CROSSCALL