Question 1

Why does the built-in BARAZZA 1FFYPI oven keep flashing and how can this problem be resolved?

Accepted Answer

A built-in BARAZZA model 1FFYPI oven that constantly flashes may indicate several situations related to its operation or a malfunction. Here are the possible causes and solutions to consider:

1. Checking the power supply

Ensure that the oven is properly plugged into a functional outlet.
Check that the circuit breaker or fuse associated with the oven circuit has not tripped or blown.
An unstable power supply can cause the control panel to flash.

2. Resetting the appliance

Unplug the oven from the electrical outlet for at least 5 minutes.
Then plug it back in to see if the flashing stops.
This operation often helps reset the oven's electronic system.

3. Checking the control panel and displays

Observe if a symbol or code is flashing on the screen. This may be an error code.
If an error code is visible, it may indicate a specific problem such as a faulty probe or a temperature issue.

4. Checking the timer or programmed functions

Ensure that the timer is not activated or stuck, as this can cause the panel to flash.
Reset the timer if necessary.

5. If the problem persists

If after these checks the flashing continues, it is likely that the oven has a technical defect requiring the intervention of a qualified technician. The problem may stem from the electronic board, sensors, or other internal components.

In this case, it is recommended to contact BARAZZA customer service or a specialized professional for a thorough diagnosis and appropriate repair.

Question 2

What does the pyrolysis symbol on the BARAZZA 1FFYPI oven mean and how do I use this function?

Accepted Answer

The pyrolysis symbol on the BARAZZA 1FFYPI oven indicates the pyrolysis cleaning function, an automatic method that cleans the inside of the oven by heating it to very high temperatures.

What is pyrolysis?

Pyrolysis is a cleaning process where the oven heats up to about 500 °C, turning food residues and fats into fine ashes. This greatly facilitates manual cleaning after the cycle.

How to use the pyrolysis function on your BARAZZA 1FFYPI oven?

Activation: Select the pyrolysis mode via the oven's control panel by choosing the corresponding symbol.
Duration: The cycle usually lasts between 1 and 2 hours depending on the level of dirt.
Safety: During pyrolysis, the oven door automatically locks to prevent any accidental opening. Do not allow children or pets to approach the appliance during this time.
Cooling: After the cycle ends, wait for the oven to cool completely before opening the door.
Cleaning: Once cooled, simply wipe the ashes with a damp cloth to restore a clean oven.

This function is very convenient for keeping your BARAZZA oven in good condition with minimal effort.

User manual BARAZZA Built-in oven : user manuals and guides in PDF

Models BARAZZA Built-in oven most viewed

Other categories BARAZZA

Recent questions about Built-in oven BARAZZA