How to adjust the working depth of the AL-KO MH 540?

Q: How to adjust the working depth of the AL-KO MH 540?

The working depth of the AL-KO MH 540 is adjusted via the braking stand , which is integrated into the device's handlebar. Increase the depth Lower the handlebar of the tiller, which simultaneously lowers the braking stand. This action slows down the tiller and the blades penetrate deeper into the soil. Reduce the depth Raise the handlebar of the tiller, which also raises the braking stand. This action speeds up the tiller and reduces the penetration of the blades into the soil. The system therefore works by an inverse movement of the handlebar: the more you lower it, the greater the depth; the more you raise it, the less the depth. Adjust gradually according to the conditions of your terrain to achieve the optimal working depth.

Question

Accepted Answer

The working depth of the AL-KO MH 540 is adjusted via the braking stand, which is integrated into the device's handlebar.

Increase the depth

Lower the handlebar of the tiller, which simultaneously lowers the braking stand. This action slows down the tiller and the blades penetrate deeper into the soil.

Reduce the depth

Raise the handlebar of the tiller, which also raises the braking stand. This action speeds up the tiller and reduces the penetration of the blades into the soil.

The system therefore works by an inverse movement of the handlebar: the more you lower it, the greater the depth; the more you raise it, the less the depth. Adjust gradually according to the conditions of your terrain to achieve the optimal working depth.

User manual AL-KO Tiller : user manuals and guides in PDF

Models AL-KO Tiller most viewed

Other categories AL-KO

Recent questions about Tiller AL-KO