Q: Where is the power switch on the Horizon Fitness EX59?

The power switch on the Horizon Fitness EX59 is located at the lower front of the device . Simply plug the power cord into a wall outlet, then toggle this switch to turn on the elliptical. Once the device is powered on, you can proceed to set your user weight and press ENTER to initialize the device.

Question 1

How to perform maintenance and upkeep on the Horizon Fitness EX-79?

Accepted Answer

Here are the maintenance recommendations for your Horizon Fitness EX-79:

Regular Cleaning

Wipe the surfaces with a slightly damp cloth and mild soap. Never use solvents. Before each cleaning, unplug the device from the electrical outlet.

Important Checkpoints

Regularly inspect the tightness of all bolts to ensure structural stability
Keep the top part of the foot supports clean and dry for safe mounting and dismounting
Check that the handles of the heart rate monitor are securely attached before each use

Optimal Usage Conditions

Use the device in a climate-controlled room. If exposed to low temperatures or high humidity, allow it to warm up to room temperature before first use to avoid premature electronic failure.

Avoid

Do not leave the device under a blanket while it is operating
Do not expose to extreme weather conditions or excessive humidity

The manual for this notice does not specify a detailed maintenance schedule or particular lubrication beyond these recommendations.

Question 2

How to power on the Horizon Fitness EX59 when it does not turn on after plugging in?

Accepted Answer

If the Horizon Fitness EX59 does not turn on after plugging in, here are the steps to power on the device:

1. Check the power supply
First, ensure that the wall outlet is functioning properly by plugging in another device (lamp, charger). Also, check that the power cord is fully inserted into the wall outlet and inspect it for any visible damage or tears.

2. Locate and operate the power switch
The switch is located at the front bottom of the exerciser. Once the cord is plugged into the wall outlet, you need to operate this switch to power on the machine. The LCD screen should then light up immediately.

3. Start your setup
After powering on, set your weight using the menu buttons and press ENTER to initialize the device. You can then select a workout program or start a quick session.

If the device still does not turn on after these checks, the issue is likely with the wall outlet, the power cord, or the electrical circuit in your home. Test the device on a different outlet. If the problem persists, contact Horizon Fitness technical support for assistance.

Question 3

Where is the power switch on the Horizon Fitness EX59?

Accepted Answer

The power switch on the Horizon Fitness EX59 is located at the lower front of the device. Simply plug the power cord into a wall outlet, then toggle this switch to turn on the elliptical.

Once the device is powered on, you can proceed to set your user weight and press ENTER to initialize the device.

User manual Horizon Fitness Elliptical bike : user manuals and guides in PDF

Models Horizon Fitness Elliptical bike most viewed

Other categories Horizon Fitness

Recent questions about Elliptical bike Horizon Fitness