How to start the Gazelle Innergy?

Q: How to start the Gazelle Innergy?

To start the Gazelle Innergy , first ensure that the battery is properly installed on the rack (it should click into place and not move when you pull on it lightly). Once the battery is securely attached, the display will automatically activate. Next, press the button 1 (on/off) located on the display attached to the left handlebar. The system will immediately activate in Eco mode (long-lasting assistance). The display will then show the current speed, the remaining battery capacity (in 5 segments), and the total distance traveled. The electric assistance starts working as soon as you begin to pedal. You will feel the motor gradually assist you according to your pedaling strength. The Eco mode offers a range of 40 to 75 km under normal conditions, depending on your weight, weather conditions, and pedaling cadence. If you want more powerful but short-term assistance , press the button 4 (Eco/Boost) once to switch to Boost mode. This will activate a temporary boost, but will reduce the range to 25-40 km. Press again to return to Eco mode. Things to know before starting: Check the battery charge by pressing the rear light button (5 LED indicators show 100%, 4 = 80%, 3 = 60%, etc.) Make sure the display is securely clipped to the handlebar. If it shows nothing, reinstall it and check that the battery is properly engaged Do not press multiple buttons simultaneously. If this happens, press and hold the Eco/Boost button for 3 seconds to reset The actual range varies depending on the cyclist's weight, pedaling strength, slopes, temperature, and battery age In Boost mode, assistance automatically stops at 25 km/h (legal limit for electric bikes in Europe) Your Gazelle Innergy is now ready to ride. To stop the assistance, press button 1 again.

Question

Accepted Answer

To start the Gazelle Innergy, first ensure that the battery is properly installed on the rack (it should click into place and not move when you pull on it lightly). Once the battery is securely attached, the display will automatically activate.

Next, press the button 1 (on/off) located on the display attached to the left handlebar. The system will immediately activate in Eco mode (long-lasting assistance). The display will then show the current speed, the remaining battery capacity (in 5 segments), and the total distance traveled.

The electric assistance starts working as soon as you begin to pedal. You will feel the motor gradually assist you according to your pedaling strength. The Eco mode offers a range of 40 to 75 km under normal conditions, depending on your weight, weather conditions, and pedaling cadence.

If you want more powerful but short-term assistance, press the button 4 (Eco/Boost) once to switch to Boost mode. This will activate a temporary boost, but will reduce the range to 25-40 km. Press again to return to Eco mode.

Things to know before starting:

Check the battery charge by pressing the rear light button (5 LED indicators show 100%, 4 = 80%, 3 = 60%, etc.)
Make sure the display is securely clipped to the handlebar. If it shows nothing, reinstall it and check that the battery is properly engaged
Do not press multiple buttons simultaneously. If this happens, press and hold the Eco/Boost button for 3 seconds to reset
The actual range varies depending on the cyclist's weight, pedaling strength, slopes, temperature, and battery age
In Boost mode, assistance automatically stops at 25 km/h (legal limit for electric bikes in Europe)

Your Gazelle Innergy is now ready to ride. To stop the assistance, press button 1 again.

User manual Gazelle Electric bike : user manuals and guides in PDF

Models Gazelle Electric bike most viewed

Other categories Gazelle

Recent questions about Electric bike Gazelle