82-3002 - Car Speaker Metra - Free user manual and instructions

Product Type	Speaker Adapter Kit
Brand	Metra
Model	82-3002
Compatible Speaker Sizes	5.25" (13 cm) and 6.5" (16.5 cm)
Vehicle Compatibility	Chevrolet Pickup, Suburban, Tahoe (1995-99); GMC Sierra, Suburban, Yukon (1995-99)
Material	ABS Plastic
Color	Black
Dimensions (L x W x H)	6.5" x 5.25" x 0.5" (165 mm x 133 mm x 13 mm, estimated)
Weight	0.2 lbs (90 g, estimated)
Included Components	2 Speaker Adaptor Plates, Mounting Screws
Tools Required	Phillips screwdriver, window crank removal tool (if applicable)
Installation Method	Mount using clips or screws to factory speaker location
Safety Precautions	Disconnect negative battery terminal before installation
Maintenance	Wipe clean with a damp cloth
Warranty	1 year limited
Country of Origin	USA
Certifications	CE, RoHS (assumed)
Package Quantity	2 (for pair of front doors)
Mounting Type	Flush mount
Connection Type	Wire harness adapter (sold separately)

Frequently Asked Questions - 82-3002 Metra

What vehicles are compatible with the Metra 82-3002?

Compatible with 1995-1999 Chevrolet and GMC full-size trucks and SUVs including Pickup, Suburban, Tahoe, Sierra, Yukon. Verify fitment with your specific vehicle.

What size speakers does the 82-3002 adapter accept?

It accepts 5.25" (13 cm) and 6.5" (16.5 cm) aftermarket speakers.

Do I need any special tools for installation?

Basic hand tools like a Phillips screwdriver and a window crank removal tool (if your vehicle has manual windows).

Is the 82-3002 easy to install?

Yes, with moderate DIY skills. Follow the step-by-step instructions in the manual.

Can I use screws instead of clips for mounting?

Yes, for heavier speakers, use screws. Otherwise, clips are sufficient.

Does the kit include wiring adapters?

No, you need to purchase a separate wiring harness adapter (sold separately) to connect to the factory wiring.

What is the material of the adapter plate?

It is made of durable ABS plastic.

How do I remove the door panel?

The manual details steps: remove window crank, armrest screws, trim piece, latch trim, then unclip the panel carefully. Use a trim removal tool to avoid damage.

What safety precautions should I take?

Always disconnect the negative battery terminal before starting to avoid a short circuit.

Is the 82-3002 compatible with 1999 GMC Sierra or Chevrolet Silverado?

Yes, but those models require removing mounting clips 'B' instead of 'A' as per the manual.

USER MANUAL 82-3002 Metra

Adapts 5¼" or 6½" speakers to front door locations

KIT COMPONENTS

TOOLS REQUIRED

Phillips screwdriver

82-3002

INSTALLATION INSTRUCTIONS

APPLICATIONS

CAR PAGE

CHEVROLET

Pickup 1995-99....1-2

Suburban 1995-99....1-2

Tahoe 1995-99....1-2

GMC

Sierra 1995-99....1-2

Suburban 1995-99....1-2

Yukon 1995-99....1-2

Illustration of a vintage car with musical notes floating around it (no text or symbols)

1-800-221-0932 www.metraonline.com

© COPYRIGHT 2001 METRA ELECTRONICS CORPORATION

ALL VEHICLES

(USE THE FOLLOWING INSTRUCTIONS FOR EACH FRONT DOOR LOCATION).

1

Disconnect the negative battery terminal to prevent an accidental short circuit. Using a window crank removal tool, release the spring clip securing the window crank handle and remove. Remove (2) Phillips screws from the armrest. Unclip the triangular trim piece in the upper corner of the door panel. Pop out the cover cap from the upper-inside corner of the door panel and remove (1) screw exposed. Using a small screwdriver, unclip the door latch trim and remove. Unclip the perimeter of the door panel and remove the panel. (NOTE: The plastic along the seam of the panel is very thin, use extreme care when removing). Unclip the factory speaker (if present) and disconnect the wiring.

2

ALL MODELS (EXCEPT SIERRA 1999, SILVERADO 1999): To mount the assembly with clips, cut and remove mounting clips "A" and mounting tabs "C" from the Speaker Adaptor Plates. To mount the assembly with screws (heavier speakers), cut and remove mounting clips "A" only. (see Fig. A). SIERRA 1999, SILVERADO 1999: Cut and remove mounting clips "B" from the Speaker Adaptor Plates. (see Fig. B)

Cross-sectional diagram of a mechanical component showing internal parts and assembly (no text or labels)

Mount the aftermarket speaker to the Speaker Adaptor Plate with the screws supplied with speaker.

Locate the factory wiring harness in the dash. Metra recommends using the proper mating adaptor and making connections as shown. (Isolate and individually tape off the ends of any unused wires to prevent electrical short circuit).

ALL MODELS (EXCEPT SIERRA 1999, SILVERADO 1999): To mount the assembly with clips, re-connect the battery terminal and test the speaker for proper operation. Mount the assembly to the door frame with (3) clips. (see Fig. A). To mount the assembly with screws, reconnect the battery terminal and test the speaker for proper operation. Drill holes in the door frame and mount the assembly with (3) screws. SIERRA 1999, SILVERADO 1999: Re-connect the battery terminal and test the speaker for proper operation. Mount the assembly to the door frame with (3) clips. (see Fig. B)

Pure mechanical gear outline diagram without any text, numbers, or symbols

120823002