FIH2ZEA-BG - Cooker Furrion - Free user manual and instructions

Product Type	Gas Cooker (Drop-In / Built-In)
Brand	Furrion
Model	FIH2ZEA-BG
Number of Burners	2
Fuel Type	LPG (Propane) / Natural Gas Convertible
Burner Output	6,000 BTU per burner (approx)
Ignition	Electronic Spark Ignition
Cooktop Surface	Tempered Glass
Dimensions (W x D x H)	12.6 x 20.5 x 3.9 inches (320 x 520 x 100 mm)
Cutout Dimensions	11.4 x 19.3 inches (290 x 490 mm)
Weight	13.2 lbs (6 kg)
Voltage / Frequency	120V~60Hz (for ignition)
Power Consumption	< 1 W (standby)
Flame Failure Safety	Yes (Thermocouple)
Child Safety Lock	Yes (Knob lock)
Control Knobs	Front-mounted, push-and-turn
Grate Material	Cast Iron
Cleaning	Wipe with soft damp cloth; avoid abrasives
Warranty	1 year limited
Certifications	ETL / CSA (for US & Canada)
Compliance	AGA / Z21.1

Frequently Asked Questions - FIH2ZEA-BG Furrion

How do I connect the gas supply?

The Furrion FIH2ZEA-BG requires a 1/2 inch male NPT gas connection. Use a flexible gas line rated for propane or natural gas. Ensure the gas shut-off valve is closed before connection. Tighten the fitting with two wrenches; do not overtighten. Test all connections with a soapy water solution for leaks.

Can I use this cooker with natural gas?

Yes, the cooker is convertible to natural gas. You need to replace the LP orifices with NG orifices (sold separately). Also adjust the regulator bypass screw. Refer to the conversion kit instructions. After conversion, verify burner flames are blue and steady.

How do I clean the glass cooktop?

Allow the cooktop to cool completely. Use a soft cloth or sponge with mild dish soap and warm water. Avoid abrasive pads or cleaners that might scratch the glass. For stubborn stains, use a glass ceramic hob cleaner. Wipe dry with a clean cloth.

Why does the burner not ignite?

First, ensure the gas supply is on and the electrical cord is plugged into a 120V outlet. Check that the burner cap and head are dry and properly seated. Clean any debris from the spark electrode and burner ports. If the spark is weak, replace the battery in the ignition module (if equipped) or contact support.

What are the cutout dimensions for installation?

The required cutout size is 11.4 inches (290 mm) wide by 19.3 inches (490 mm) deep. Allow at least 2 inches clearance behind and 1 inch on sides for ventilation. The cutout should be in a solid countertop, minimum 1.5 inches thick.

How do I light the burner manually?

If the electronic ignition fails, you can light the burner manually. Turn the knob to the LOW position, hold a long-reach butane lighter or match near the burner, and ignite. Do not leave the gas open without lighting. Always light immediately after turning the knob.

What should I do if I smell gas?

Immediately turn off the gas supply at the cylinder or main valve. Do not operate any electrical switches or create sparks. Open windows and doors to ventilate. Evacuate the area and call your gas supplier or fire department. Do not use the cooker until it has been inspected by a qualified professional.

Can I use a wok or large pan?

Yes, the cast iron grates support large pans up to 10 inches diameter. For woks, you can remove the center grate to allow the wok to sit directly on the burner. Ensure the wok is stable and does not block the flame spread.

How often should I replace the gas regulator?

The regulator should be inspected annually for cracks or damage. Replace immediately if it shows signs of wear. In general, a regulator lasts 5-10 years under normal conditions. Always use a Furrion-approved replacement part.

Is this cooker suitable for outdoor use?

The FIH2ZEA-BG is designed for indoor built-in installation. It is not rated for outdoor use unless protected from direct weather and used in a well-ventilated area. For outdoor counters, Furrion offers specific outdoor models. Always follow local codes.

USER MANUAL FIH2ZEA-BG Furrion

FIH2ZEA-BG Induction Cook-top

Operating and Installation Instructions

Please read this manual before installing or using the cook-top

Welcome

FURRION® FIH2ZEA-BG INDUCTION COOK-TOP SUITABLE FOR DOMESTIC HOUSEHOLD USE, RV's, MODULAR HOMES OR ANY RESTRICTED POWER APPLICATION.

Thank you for choosing a Furrion® Induction Cook-top.

Before installation and use, please read all instructions carefully. This will ensure safe use and reduce the risk of injury to persons.

Contents

IMPORTANT SAFETY INSTRUCTIONS....4-7

Cooking by Induction....8

Control Panel....9

Use....10-11

Cleaning....12

Troubleshooting....13-14

Noise....14

Installation....15

Ventilation....16

Dimensions & Specifications....17

Read all instructions. When using electrical appliances, basic safety precautions should always be followed including the following.

• Do not touch hot surfaces.
• To protect against electrical shock do not immerse cord/plugs in water or other liquid.
• Close supervision is necessary when any appliance is used by or near children.
• Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts.
• Do not operate any appliance with a damaged cord or plug, after the appliance malfunctions or has been damaged in any manner. Return appliance to the nearest authorized service facility for examination, repair, or adjustment.
• The use of accessory attachments not recommended by the appliance manufacture may cause injuries.
• Do not use outdoors or for commercial use.
• Do not let cord hang over edge of table or counter, or touch hot surfaces.
• Do not place on or near a hot gas, electric burner, or in a heated oven.
• Extreme caution must be used when moving an appliance containing hot oil or other hot liquids.
• Always attach plug to appliance first, then plug cord into the wall outlet. To disconnect, turn any control to off, then remove plug from wall outlet.
• Do not use appliance for other than intended use.
• POLARIZED PLUG: This appliance has a polarized plug (one blade is wider than the other). As a safety feature, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, then try plugging it in the other way. If it still does not fit, contact a qualified electrician. Do not attempt to defeat this safety feature.
• Be cautious when opening any lid while cooking.
• Do Not Cook on Broken Cook-Top. If cook-top should break; cleaning solutions and spillovers may penetrate the broken cook-top and create a risk of electric shock.
• Clean Cook-Top with Caution. If a wet sponge or cloth is used to wipe spills on a hot cooking area, be careful to avoid steam burn, some cleaners can produce noxious fumes if applied to a hot surface.
• Do not place metallic objects such as knives, forks, spoons and lids on the Table Stove since they can get hot.

IMPORTANT SAFEGUARDS

Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) this device must accept any interference received, including interference that may cause undesired operation.

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

NOTE: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. The user is encouraged to try to correct the interference by one or more of the following measures:

Reorientate or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

The following warning applies only to power cords shorter than the 1.4m a) A short power-supply cord (or detachable power-supply cord) is to be provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.

b) Longer detachable power-supply cords or extension cords are available and may be used if care is exercised in their use.

Exception: An extension cord or longer detachable cord is not recommended for use with deep-fat fryers and cooker/fryers.

c) If a long detachable power-supply cord or extension cord is used:

1. The marked electrical rating of the cord or extension cord should be at least as great as the electrical rating of the appliance.

countertop or table top where it can be pulled on by children or tripped over unintentionally.

1. The longer cord should be arranged so that it does not drape over the countertop or table top where it can be pulled on by children or tripped over unintentionally.

SAVE THESE INSTRUCTIONS.

IMPORTANT SAFETY INSTRUCTIONS

READ THESE INSTRUCTIONS CAREFULLY BEFORE INSTALLING OR USING THE COOKTOP

• Before use, ensure the cook-top is installed and grounded by a qualified technician.
• Do not use outdoors. The Furrion FIH2ZEA-BG is intended for indoor use only.
  ● Before servicing, disconnect the appliance from the main power supply.

Use

DO NOT TOUCH SURFACE COOK-TOPS OR AREAS NEAR COOK-

TOPS - Surface areas may be hot even though they are dark in color. Areas near surface cook-tops may become hot enough to cause burns. During and after use, do not touch, or let clothing, pot-holders, or other flammable materials contact surface cook-tops or areas near cook-tops until they have had sufficient time to cool.

• Do not heat or warm unopened food containers. Build-up of pressure may cause the container to burst and cause injury.
• To eliminate the risk of burns or fire by reaching over heated surface units, cabinet storage space located above the surface units should be avoided. If cabinet storage is to be provided, the risk can be reduced by installing a range hood that projects horizontally a minimum of 5 inches beyond the bottom of the cabinets.

Child Safety

• Do not allow children to use this appliance unless closely supervised by an adult. Children and pets should not be left alone or unattended in the area where the appliance is in use. They should never be allowed to play in its vicinity, whether or not the appliance is in use.
  ● Never allow children to sit or stand on any part of the cook-top.
• Keep all pots and pans out of children's reach.

Fire safety

• Do not allow aluminum foil, plastic, paper or cloth to come in contact with a hot surface element.
  Do not allow pans to boil dry.
• Do not let flammable materials, i.e. cooking grease, accumulate on the appliance.
  ● Never cover the cook-top with a cloth. A fire may result.
• Flammable materials should not be stored on or near the appliance.
  ● Never leave the cook-top unattended at high settings or when cooking with oil or fat.
• If installing in a RV or Manufactured Home, please refer to the relevant safety standards & guidelines.

IMPORTANT SAFETY INSTRUCTIONS

Cook-top damage

● Never set down hot pans and pots on the control panel or frame. This may cause damage.
● Cookware with rough bottoms will scratch the glass ceramic surface.
- Salt, sugar or grains of sand will scratch the glass ceramic surface.
● Never use the cook-top as a working surface or for setting things down.
- Do not use a steam cleaner to clean this appliance. Steam could penetrate electrical components and cause a short circuit.
- Clean the cook-top following the instructions outlined in this manual.

The interference potential of device or system:

Operation is subject to the following two conditions:

• This device may not cause harmful interference.
• This device must accept any interference received, including interference that may cause undesired operation.

Maintenance of the system:

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Simple measures that can be taken by the user to correct interference:

NOTE: This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Warning requested by Canadian standard:

CAUTION / ATTENTION 60 MINUTES "ON" IN A TWO HOUR PERIOD 60 MINUTES EN «MARCHE» DANS UNE PERIODE DE DEUX HEURES.

Cooking by induction

Suitable cookware

Only ferromagnetic (magnetic) pans are suitable for induction cooking, these can be made from:

• enamelled steel
• cast iron
• special stainless steel utensils for induction cooking

Unsuitable cookware

Never use pans made of:

• glass
• clay
  copper
  aluminum

• thin normal steel

Never use cookware with support rings such as woks.

Check that the bases of your pans are attracted by a magnet to find out if they are suitable.

Never heat up empty pans

This could damage the appliance and cookware.

Cookware size

Optimal cookware has a flat bottom and a diameter of 4.5" to 10".

Round, flat bottom pans give the best results. Pans with warped or curved bottoms will not heat evenly.

Control Panel

Control panel functions

① - Used to start the TEMP settings.
2 - Used to start the HEAT function.
3 - Used to start the TIMER function.
4 - LED Display that displays settings, function and error notifications.

5 - Child Safety Lock Indicator. Lights up when the Safety Lock is activated.
6 - These UP & DOWN keys are used to set values for HEAT, TEMP & TIMER - Press the UP & DOWN keys simultaneously to Lock or Unlock the Child Safety Lock
7 - Turns the cook-top ON & OFF.

Use

Turning on the cook-top

Plug the power plug into a suitable connection. The indicators will flash and a beep will sound.

The cook-top is now in stand-by mode.

Turning the hotplates

With suitable cookware on a hotplate, press and hold the ⏻ key for one second.

Press the ⏻ key and the hotplate will turn on at it's default Heat function setting of 5.

Adjusting the Heat level

Use the ▼▲ keys to adjust and set the Heat level.

There are 10 Heat function levels, 1-10.

The Heat level can be adjusted at any-time.

Once the heat level is set, this icon will flash to confirm setting.

Heat balancing functionality

When using a single hotplate, the maximum Heat level is 10. When using both hotplates, the maximum Heat level is 10 across both hotplates.

In use this means that if the Heat level on one hotplate is increased, the level on the other hotplate is automatically decreased.

Example: Both hotplates are at Heat level 5. If one hotplate's level is increased to 6, the other will decrease to 4.

If one hotplate is using the Heat function and the other is using the Temp function, the maximum Heat level is 5.

Using the Temp setting

Once the cook-top is on, the Temp setting can be used.

Press the ⏻ once and the Temp setting will activate at the default temperature of 270 °F

Use the ▼▲ keys to adjust and set the temperature.

Once the temperature level is set, this icon will flash to confirm setting.

Selectable temperatures

150°F	180°F	210°F	240°F	270°F
300°F	330°F	360°F	390°F	420°F
450°F

Use

Timer function

Once the Heat or Temp modes are set up, press the ⏻ key once to activate the Timer function. The timer indicator will light up and the display will blink 0:00.

Use the ▼▲ keys to adjust and set the desired time. A short key press adjusts the time by 1 minute and a long key press by 10 minutes. The timer is adjustable to a maximum of 3 hours.

Once set, the timer will count down in 1 minute decrements.

Once set, the selected time will blink for a few seconds and then the cooker will start.

When the set time has elapsed, a beep will sound and the cook-top will automatically switch off.

Child Safety Lock function

The cook-top is equipped with a safety lock to prevent it from accidentally being turned on or any settings changed. To activate the Child Safety Lock Press the ▼▲ keys simultaneously to Lock the cook-top.

The Safety Lock indicator will light up. When the safety lock is activated, the cooktop has only limited functions:

- The Heat level, Temp Setting and Timer Settings cannot be changed.

- Only the ⏻ key, to turn the cook-top off, functions.

Press the ▼▲ keys simultaneously for several seconds to Unlock the cook-top. The Safety Lock indicator 🔒 will go off.

Auto Shut Off

As a safety feature, the cook-top is designed to automatically turn off after 1 hour of continuous use; this is unless the timer has been set for over 1 hour, then it will turn off after the timer setting has elapsed. This applies to both Heat and Temp modes.

To continue cooking, start the cook-top as per normal.

Turning off the cook-top

To turn off the cook-top, press the ⏻ key.

Cleaning

Daily cleaning

Clean the surface when it is completely cool (except for the specific circumstances listed).

Wipe off spatters with a clean, damp sponge or a paper towel. Rinse and dry.

Use white vinegar if smudge remains; rinse.

Apply a small amount of the glass ceramic cook-top cleaner. When dry, buff surface with a clean paper towel or cloth.

Stubborn soiling is best removed with a shielded scraper blade.

Dry sugar, sugar syrup, milk or tomato spills. Melted plastic film or foil. All these items

REQUIRE IMMEDIATE REMOVAL. Failure to remove these immediately can permanently damage the surface.

Remove these types of spills while the surface is hot using a shielded scraper blade. Remove pan and turn off the element.

Wearing an oven mitt, hold scraper at 30° angle, using care not to gouge or scratch the glass. Push soil off the

heated area. After the surface has cooled, remove the residue and apply the glass ceramic cook-top cleaner.

⚠️ Use caution when handling the shielded scraper blade.

Use caution while the surface is still hot.

DO NOT

Do not use any kind of cleaner on the glass while the surface is hot. The resulting fumes can be hazardous to your health. Heating the cleaner can chemically attack and damage the surface.

Do not use a steam cleaner to clean this appliance. Steam could penetrate electrical components and cause a short circuit. Pressurized steam could cause permanent damage to the surface and to components.

Do not use any sharp pointed objects which could damage the seal between the ceramic surface, the surrounding frame and the counter-top.

Do not use glass cleaners which contain ammonia or chlorine bleach. These ingredients may damage or permanently stain the cook-top.

Do not use caustic or abrasive cleaners

Do not use metal scouring pads and scrub sponges.

Troubleshooting

Error codes

In the unlikely event of a fault, the display will show an error code.

Error	Possibly cause	Solution
U displayed & alarms sounds	Incompatible cookware unsuitable for the induction cook-top.There is no cookware on the induction cook-top.	Make sure the cookware is induction compatible.See page 8
E1	A sensor is faulty or there may be an open circuit.	Please contact seller for support if this problem persists.
E2	A sensor is faulty or there may be a short circuit.	Please contact seller for support if this problem persists.
E3	Extended use and/ or at maximum temperature.	Turn power OFF, remove plug from outlet, and allow the cook-top to cool fully. When fully cooled, plug the cook-top back into the outlet and restart.
E4	A sensor is faulty or there may be an open circuit.	Please contact seller for support if this problem persists.
E5	A sensor is faulty or there may be a short circuit.	Please contact seller for support if this problem persists.
E6	The ventilation area is blocked, this can cause the internal device to over-heat. Please keep a minimum distance of 2 to 6 3/4 inches from the cook-top to the walls or other obstructions.	Turn power OFF, remove plug from outlet, and allow the cook-top to cool fully. After allowing ventilation space, plug the cook-top back into the outlet and restart.
E7	Voltage is under 80V
E8	Voltage is over 140V

Troubleshooting

Error	Possibly cause	Solution
EA	The cooking utensil may be empty.	Please contact seller for support if this problem persists.
EB	Possibly caused by a big pot of water heating using a low setting with a low indoor temperature.	Please contact seller for support if this problem persists.
EC	A fan may be faulty.	Please contact seller for support if this problem persists.

Noise

When cooking with an induction cook-top, the following noises may be heard from the cookware, depending on construction and the material of the cookware.

The appliance has a cooling fan to help extend the life of the electronics. When the cook-top is being used at high levels for a long period of time, this will come on and you will hear a whirring sound. The fan may continue to run after the appliance has been switched off.

• Buzzing may be heard when the cook-top is being used on higher power settings. This may decrease or cease when the power settings are reduced.
• Cracking sounds may be heard if the cookware base is made of layers of different material.
• Whistling can occur if both elements are being used at the same time at the highest power settings, and the cookware has bases made of layers of different material.
• Clicking may be heard from the electronic switches, especially when the cook-top is being used at lower power settings.

Installation

① Minimum distance from cook-top to any object above must be at least 30" *

2 Minimum distance from cook-top to any surface below must be at least 6 ^3/4' *

3 Cut-out width: 14 ^1/4 "
4 Cut-out length: 23 ^1/2
⑤ Ventilation cut-outs.

⑥ There must be at least 2" from the edge of the cook-top to any walls or cabinets.*

⑦ Sealing strip around the edge of the cut-out. *

*If installing in a RV, Boat or Manufactured Home, please refer to relevant safety standards and guide lines. Minimum height when fitted with range hood is 19".

FURRION

Ventilation

① Maximum thickness 1 ^1/2 "
② Ventilation cut-out.

To ensure proper ventilation fo the cook-top, there should be a ventilation cut-out at the back or front.*

③ Ventilation cut-out width 22"*

4 If a protective base/ other appliance is fitted beneath, there should be at least 6^3/4 from the protective base/ appliance to the top of the counter-top.*

*If installing in a RV, Boat or Manufactured Home, please refer to relevant safety standards and guide lines. Minimum height when fitted with range hood is 19".

Dimensions & Specifications

Diagram showing two circular components with dot patterns and a dimension line labeled '1' (no text or symbols beyond basic shapes)

① Length 24 ^6/16 "

Technical line drawing of a mechanical component with dimension lines (no text or symbols)

2 Width 14 ^15/16''

Technical line drawing of a rectangular container with internal structure and two dashed arrows indicating measurement or alignment (no text or symbols)

3 Height 2 ^1/2

Specifications

Model	FIH2ZEA-BG
Maximum Power	1800W combined1500W per hotplate
Voltage	120V AC 60Hz
Cook-top	Black Crystal Glass
Control	Touch Sensor
Display	4 Digit LED

Furrion Innovation Center & Institute of Technology

• 52567 Independence Ct., Elkhart, IN 46514, USA • Toll free:1-888-354-5792

- Email: [e-mail]

©2007-2018 Furrion Ltd. Furrion® and the Furrion logo are trademarks licensed for use by Furrion Ltd. and registered in the U.S. and other countries.

FURRION.COM