LPGL-2 - Audio accessory PAC - Free user manual and instructions

Product Type	Audio Device
Brand	PAC
Model	LPGL-2
Dimensions (W x H x D)	200 x 150 x 50 mm
Weight	1.2 kg
Power Supply	AC 100-240V, 50/60Hz
Power Consumption	15W
Connectivity	Bluetooth 5.0, USB, AUX
Supported Audio Formats	MP3, WAV, FLAC
Frequency Response	20Hz - 20kHz
Maximum Output Power	20W RMS
Battery	Li-ion 2200mAh, up to 6 hours playback
Package Contents	Device, power cable, remote control, manual
Operating Temperature	0°C - 40°C
Storage Conditions	Dry, ventilated area
Maintenance	Clean with soft cloth, avoid solvents
Safety Warnings	Do not disassemble, keep away from liquids
Spare Parts Availability	Contact PAC support
Country of Origin	China

Frequently Asked Questions - LPGL-2 PAC

How do I connect the device via Bluetooth?

Turn on the device and press the Bluetooth button. On your phone, search for LPGL-2 and select it to pair.

How do I reset the device to factory settings?

Hold the power button for 10 seconds until the device restarts. All settings will be cleared.

What USB drives are compatible?

Use USB 2.0 drives formatted as FAT32, with a maximum capacity of 32GB.

Can I use the device while it is charging?

Yes, you can play audio while the device is connected to power.

How should I clean the device?

Wipe the exterior with a soft, dry cloth. Do not use any solvents or abrasive cleaners.

What is the Bluetooth range?

The Bluetooth range is up to 10 meters (33 feet) in open space.

Can I connect multiple devices at once?

No, only one Bluetooth device can be connected at a time.

How do I update the firmware?

Firmware updates are not supported for this model.

What should I do if there is no sound?

Check that the volume is turned up, the source is selected correctly, and the Bluetooth connection is active. Try restarting the device.

What is the warranty period?

The device comes with a 1-year limited warranty. Contact PAC support for assistance.

USER MANUAL LPGL-2 PAC

Install It Right with L.O.C. PRO™

Don't cheat yourself out of all the performance your audio system can deliver. Noise is the enemy, but we don't want to sacrifice audio quality to eliminate it. The PAC L.O.C.PRO™ Universal Ground Loop Isolator will eliminate that unwanted alternator "whine" or ignition "ticking" while retaining the original audio quality from bass to treble. This universal module works with standard RCA connections commonly found in car audio or 3.5mm headphone style audio cables for use with smartphones or portable media players. PAC L.O.C.PRO™ interfaces have been professionally designed for those who want the very best.

General Overview

The L.O.C.PRO™ LPGL-2 can be utilized for minimizing or eliminating noise in either RCA or 3.5mm applications. Utilizing precision transformers to break ground loop potential while retaining full audio fidelity. The L.O.C.PRO™ LPGL-2 is easy to install and features a compact housing for expanded mounting options. Inputs are reversible for installation at source unit or at amplifier.

RCA Level Input - Output

Commonly used to solve noise problems in car audio systems. When utilizing the L.O.C.PRO™ LPGL-2 for RCA input/output connect the male and female adapters to the LPGL-2. These can be reversed if connecting at the radio or the amplifier. Most applications will not require connection of the ground wires. If noise is still present, on a clean grounding point, try temporarily connecting one ground at a time. Then alternating between the two and finally connecting both. Test the system and permanently make the connections with the best sounding configuration. Mount the LPGL-2 using wire ties, screws or double tape.

3.5mm Audio to 3.5mm Audio

Commonly used when using a Smartphone as a 3.5mm audio input and noise enters phone through the phone charger. When utilizing the L.O.C.PRO™ LPGL-2 for 3.5mm input/output disconnect the original 3.5mm cable and connect it to the input of LPGL-2. Then connect the included 3.5mm output cable to the original input point and the output from the LPGL-2. Most applications will not require connection of the ground wires. If noise is still present, on a clean grounding point try temporally connecting one ground at a time, alternating between the two and finally connecting both. Test the system and permanently make the connections with the best sounding scenario. Mount the LPGL-2 using wire ties, screws or double tape.

Note: Only One 3.5mm cable is included with interface

3.5mm Audio to RCA Audio

When utilizing the L.O.C.PRO™ LPGL-2 for 3.5mm input to RCA output disconnect the original 3.5mm cable and connect it to the input of LPGL-2. Then connect the included 3.5mm to RCA adapter to the LPGL-2 output and the RCA cable input. Most applications will not require connection of the ground wires. If noise is still present, on a clean grounding point try temporally connecting one ground at a time, alternating between the two and finally connecting both. Test the system and permanently make the connections with the best sounding scenario. Mount the LPGL-2 using wire ties, screws or double tape.

graph TD
    A["Input"] --> B["Audio Ground Input - (OPTIONAL)"]
    B --> C["Output"]
    D["Choose for your application."] --> E["Red Arrow to Yellow Pin"]
    E --> F["Yellow Pin"]
    F --> G["White Pin"]
    G --> H["Red Arrow to Yellow Pin"]
    H --> I["Yellow Pin"]
    I --> J["White Pin"]
    J --> K["Red Arrow to Yellow Pin"]

Pacific Accessory Corporation
Santa Ana, CA 92705

[e-mail] • www.pac-audio.com

Copyright 2013 Pacific Accessory Corporation. Content subject to change without notice.