IR-X - Uncategorized PAC - Free user manual and instructions
Find the device manual for free IR-X PAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IR (Impulse Response) Processor |
| Dimensions (W x H x D) | 120 mm x 50 mm x 80 mm (4.7 x 2.0 x 3.1 in) |
| Weight | 300 g (10.6 oz) |
| Power Supply | USB 5V / 500 mA or 9V DC (center negative) |
| Main Functions | IR loading and processing, bypass, gain adjustment |
| Input Connections | 1/4" TS jack (instrument level) |
| Output Connections | 1/4" TS jack (line level) |
| Sample Rate | 44.1 kHz / 48 kHz |
| Bit Depth | 24-bit |
| Frequency Response | 20 Hz – 20 kHz (±0.5 dB) |
| Dynamic Range | 110 dB |
| Controls | Level knob, bypass footswitch, USB port |
| Indicators | LED for power and bypass status |
| Construction | Metal chassis with durable finish |
| Maintenance | Clean with a soft, dry cloth. Do not use solvents. |
| Safety | Use only the specified power supply. Do not expose to moisture. |
| Spare Parts / Repairability | Limited; contact authorized service center for repairs. |
| Operating Temperature | 0°C to 40°C (32°F to 104°F) |
| Package Contents | IR-X unit, USB cable, quick start guide |
Frequently Asked Questions - IR-X PAC
How do I load an IR file into the PAC IR-X?
Connect the device to your computer via USB. Use the dedicated software or drag-and-drop the IR file (WAV format) onto the device drive. Ensure the file is mono, 24-bit, 44.1 or 48 kHz.
Can I use the IR-X with a guitar amplifier?
Yes. Connect your guitar to the input, then connect the output to the amplifier's input. The IR-X processes the signal and can be placed before or after other pedals.
Does the IR-X require batteries?
No. It is powered via USB (5V) or an optional 9V DC power supply (center negative). USB power is sufficient for standard operation.
How many IR slots are available?
The IR-X has a single active IR slot. You can store multiple IR files on the internal memory and switch between them via the software or external control.
What is the latency of the IR-X?
Latency is extremely low, less than 1 ms, making it suitable for real-time performance.
Can I use the IR-X with a stereo setup?
The IR-X is mono. For stereo, you would need two units. However, the output can be split after the IR-X for a stereo effect if desired.
My IR-X is not recognized by the computer. What should I do?
First, try a different USB cable and port. Ensure the device is powered (LED on). If still not recognized, reinstall the driver or check for conflicts with other devices.
How do I perform a factory reset?
Press and hold the bypass footswitch while connecting power. Keep holding for 5 seconds until the LED flashes rapidly. Release to reset all settings and IR files.
Can I use third-party IR files?
Yes. The IR-X accepts standard WAV IR files with the correct sample rate and bit depth. Ensure they are mono and not longer than 1 second.
What is the bypass mode?
Press the footswitch to toggle bypass. When bypassed, the input signal is routed directly to the output without IR processing. The LED will change color to indicate bypass status.
User questions about IR-X PAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual IR-X - PAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. IR-X by PAC.
USER MANUAL IR-X PAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PAC
Model : IR-X
Category : Uncategorized