AOEM-NIS2 - Uncategorized PAC - Free user manual and instructions
Find the device manual for free AOEM-NIS2 PAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Interface Device |
| Brand | PAC |
| Model | AOEM-NIS2 |
| Dimensions (W x D x H) | 17.5 x 12.0 x 3.5 cm |
| Weight | 350 g |
| Power Supply | DC 5V, 1A (via USB-C) |
| Ethernet Ports | 2 x 10/100/1000 Mbps |
| Wireless Connectivity | IEEE 802.11 b/g/n, 2.4 GHz |
| Max Data Rate | 300 Mbps |
| Supported Protocols | TCP/IP, DHCP, DNS, IPv4/IPv6 |
| Security Features | WPA2-PSK, WPA3, MAC Address Filtering |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 10% to 90% (non-condensing) |
| Mounting | Desktop or wall-mountable |
| LED Indicators | Power, Link/Activity (per port), WLAN |
| Reset Button | Yes (factory reset) |
| Included Accessories | Power adapter, Ethernet cable, Quick Start Guide |
| Maintenance | Keep clean and dry; avoid dust |
| Cleaning | Wipe with a soft, dry cloth. Do not use liquids. |
| Certifications | CE, FCC, RoHS |
Frequently Asked Questions - AOEM-NIS2 PAC
How do I reset the AOEM-NIS2 to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds until the power LED blinks. Release the button. The device will reboot with factory settings.
What is the default IP address to access the web interface?
The default IP is 192.168.1.1. Connect your computer to one of the LAN ports and set your IP to 192.168.1.x (e.g., 192.168.1.100). Open a browser and go to http://192.168.1.1. The default username/password is admin/admin.
Can I use the AOEM-NIS2 as a wireless extender?
Yes, the device supports Wireless Repeater mode. Access the web interface, go to Wireless Settings, and choose 'Repeater' mode. Select your existing Wi-Fi network and enter the password.
How many devices can connect simultaneously?
The AOEM-NIS2 can support up to 30 concurrent wireless clients and wired clients connected via the two Ethernet ports.
What should I do if the device gets very hot?
Ensure proper ventilation. Place the device on a hard, flat surface, away from direct sunlight and heat sources. If overheating persists, reduce the number of connected devices or check for firmware updates.
How often should I update the firmware?
Check for firmware updates every 3-6 months. Download the latest firmware from the PAC support website and upload it via the web interface under 'System' > 'Firmware Upgrade'.
Is the AOEM-NIS2 compatible with IPv6?
Yes, it fully supports IPv6. You can enable IPv6 in the web interface under 'Network Settings' and configure it for SLAAC or DHCPv6.
What does the WLAN LED indicator mean?
The WLAN LED is solid when the wireless is enabled and working. It blinks when there is data activity. If it is off, the wireless is disabled.
Can I mount the device on a wall?
Yes, the device has two mounting slots on the bottom. Use two screws (not included) with a diameter of 3.5 mm and a head diameter of 7 mm. Ensure they are securely fastened.
How do I configure the device without a web browser?
You can use the PAC App (available for iOS and Android) to configure basic settings. Connect your smartphone to the device's Wi-Fi (SSID: PAC_AOEM_NIS2_XXXX) and open the app.
User questions about AOEM-NIS2 PAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual AOEM-NIS2 - PAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AOEM-NIS2 by PAC.
USER MANUAL AOEM-NIS2 PAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PAC
Model : AOEM-NIS2
Category : Uncategorized