APSUB-TY13 - Uncategorized PAC - Free user manual and instructions
Find the device manual for free APSUB-TY13 PAC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Active Powered Subwoofer |
| Brand | PAC |
| Model | APSUB-TY13 |
| Dimensions (W x H x D) | 12.6 x 11.8 x 12.6 inches (32 x 30 x 32 cm) |
| Weight | 17.6 lbs (8 kg) |
| Power Supply | AC 110-240V, 50/60Hz |
| Power Output | 100 Watts RMS |
| Driver Size | 10 inches (25.4 cm) |
| Frequency Response | 30 Hz – 200 Hz |
| Inputs | RCA line-level input, speaker-level input |
| Controls | Volume, crossover frequency (40-180 Hz), phase switch (0/180°), auto on/off |
| Enclosure Type | Bass reflex with front-firing port |
| Cabinet Material | MDF with black vinyl finish |
| Protection | Short circuit, thermal overload, DC offset |
| Included Accessories | Power cord, owner's manual, rubber feet |
| Installation | Free-standing on floor or shelf |
| Repairability | User-replaceable fuse; contact service center for driver replacement |
| Energy Consumption | Standby < 0.5W, max 200W |
Frequently Asked Questions - APSUB-TY13 PAC
How do I connect the APSUB-TY13 to my AV receiver?
Use an RCA cable from the subwoofer output on your receiver to the line-level input on the subwoofer. Alternatively, use speaker wire to the speaker-level input if your receiver lacks a dedicated sub output.
What is the best placement for the subwoofer?
Place the subwoofer in a corner or along a wall for maximum bass output. Avoid placing it directly against furniture. Experiment with the phase switch (0 or 180 degrees) to find the best integration with your main speakers.
How do I adjust the crossover frequency?
Set the crossover knob to match your main speakers' lower limit (e.g., 80 Hz for satellites). The subwoofer will handle frequencies below that point. Fine-tune by listening for a smooth transition.
Why is my subwoofer not turning on?
Check the power cord and wall outlet. Ensure the auto on/off switch is enabled. If there is no audio signal, the sub may be in standby. If still off, verify the fuse and replace if blown.
Can I use this subwoofer with a car audio system?
No, the APSUB-TY13 is designed for home use with AC power. For car use, you would need a DC-to-AC inverter and appropriate installation.
What size room is this subwoofer suitable for?
It is ideal for small to medium rooms up to 300 sq ft (28 sq m). For larger spaces, consider pairing two subwoofers.
How do I clean the subwoofer cabinet?
Wipe the cabinet with a soft, dry cloth. Do not use water or cleaning agents. Avoid touching the driver cone.
Is the subwoofer covered by warranty?
Yes, PAC offers a one-year limited warranty against defects in materials and workmanship. Keep your proof of purchase.
What does the phase switch do?
The phase switch (0°/180°) reverses the polarity of the subwoofer signal. Use the setting that gives the loudest, most cohesive bass at your listening position.
Can I replace the fuse myself?
Yes, the fuse is user-accessible. Turn off and unplug the subwoofer, then locate the fuse holder next to the power input. Replace with the same type (e.g., 2A, 250V fast-blow). If it blows repeatedly, consult a technician.
User questions about APSUB-TY13 PAC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual APSUB-TY13 - PAC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APSUB-TY13 by PAC.
USER MANUAL APSUB-TY13 PAC
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : PAC
Model : APSUB-TY13
Category : Uncategorized