TDP0500 - Oscilloscope TEKTRONIX - Free user manual and instructions
Find the device manual for free TDP0500 TEKTRONIX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | Tektronix |
| Model | TDP0500 |
| Product Type | Differential Probe |
| Bandwidth | 500 MHz |
| Maximum Differential Input Voltage | ±1000 V (DC + peak AC) for 10x attenuation |
| Attenuation Settings | 1x, 10x |
| Input Impedance | 1 MΩ / 0.7 pF (differential mode) |
| Input Connector | BNC female |
| Output Connector | BNC male (with TekProbe interface) |
| Cable Length | 1.2 m |
| Dimensions (Probe Head) | Approx. 2.5 cm x 1.5 cm x 1.0 cm |
| Weight (Probe Head with Cable) | Approx. 120 g |
| Power Source | Powered by oscilloscope via TekProbe interface |
| Operating Temperature | 0 °C to 50 °C |
| Storage Temperature | -40 °C to 70 °C |
| Safety Compliance | CAT I 1000 V, CAT II 600 V |
| Common Mode Rejection Ratio (CMRR) | > 60 dB at 100 kHz, > 20 dB at 100 MHz |
| Intended Use | High-voltage differential measurements on oscilloscopes |
| Accessories Included | Probe tips, alligator clips, hook clips, carrying case |
| Warranty | 1 year (extendable) |
Frequently Asked Questions - TDP0500 TEKTRONIX
What is the Tektronix TDP0500 used for?
The Tektronix TDP0500 is a differential probe designed for measuring high-voltage signals safely with an oscilloscope. It provides up to 1000 V differential range and 500 MHz bandwidth.
Is the TDP0500 compatible with any oscilloscope?
The TDP0500 uses a TekProbe interface and is compatible with Tektronix oscilloscopes that support this interface. For other oscilloscopes, an adapter may be required but performance may be reduced.
What do the attenuation settings (1x/10x) mean?
The attenuation setting adjusts the input range. In 1x mode, the maximum differential input is ±100 V. In 10x mode, it is ±1000 V. The oscilloscope will automatically scale the display based on the setting.
How do I connect the TDP0500 to my circuit?
Use the included probe tips, alligator clips, or hook clips to connect to the test points. Ensure the input voltage does not exceed the maximum rating for the selected attenuation.
What is the common mode rejection ratio (CMRR) of the TDP0500?
The CMRR is typically > 60 dB at 100 kHz and > 20 dB at 100 MHz, ensuring good rejection of common-mode noise.
How do I calibrate the TDP0500?
Calibration should be performed by a qualified technician using a calibration fixture or as part of the oscilloscope's probe compensation routine. Refer to the user manual for details.
Can I use the TDP0500 for three-phase power measurements?
Yes, but you need three probes and an oscilloscope with at least three channels. Ensure the total voltage between phases does not exceed the probe's maximum differential rating.
What safety precautions should I take when using the TDP0500?
Always observe the maximum input voltage and category ratings. Use only insulated connections and avoid contact with live circuits. The probe is designed for CAT I and CAT II environments.
How do I clean and maintain the TDP0500?
Clean the probe body with a soft, dry cloth. Do not use solvents. Check the cable and connectors for damage regularly. Store in the provided case when not in use.
Where can I find the user manual for the TDP0500?
The user manual is available for download on the Tektronix website or through notice-facile.com in PDF format.
User questions about TDP0500 TEKTRONIX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Oscilloscope in PDF format for free! Find your manual TDP0500 - TEKTRONIX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TDP0500 by TEKTRONIX.
