HV-60 - Uncategorized Sanwa - Free user manual and instructions

Brand	Sanwa
Model	HV-60
Product Type	Digital Multimeter
Display	LCD, 2000 counts, 3 1/2 digits
DC Voltage	200mV/2V/20V/200V/600V ±0.5%
AC Voltage	200mV/2V/20V/200V/600V ±1.0%
DC Current	200µA/2mA/20mA/200mA/10A ±0.8%
AC Current	200µA/2mA/20mA/200mA/10A ±1.2%
Resistance	200Ω/2kΩ/20kΩ/200kΩ/2MΩ/20MΩ ±0.8%
Capacitance	20nF/200nF/2µF/20µF/200µF
Frequency	2kHz/20kHz/200kHz
Diode Test	Yes
Continuity Test	Yes, with buzzer
Data Hold	Yes
Auto Power Off	Yes, after 15 minutes
Safety Rating	CAT II 600V, CAT III 300V
Power Supply	2 x AA batteries (1.5V)
Dimensions	150 x 70 x 30 mm
Weight	Approx. 200g (including batteries)
Accessories Included	Test leads, battery, user manual
Warranty	1 year, valid only in Japan

Frequently Asked Questions - HV-60 Sanwa

How do I measure DC voltage with the Sanwa HV-60?

Set the rotary switch to the DCV position. Connect the red test lead to the V/Ω/mA jack and the black lead to the COM jack. Touch the probes to the circuit and read the value on the LCD. Ensure the voltage does not exceed 600V.

How do I replace the batteries?

Turn off the multimeter and remove the test leads. Open the battery compartment at the back of the unit. Replace the two AA batteries with new ones, observing correct polarity. Close the compartment securely.

What does the continuity test do?

The continuity test checks if a circuit is complete. Set the rotary switch to the continuity symbol (usually a diode with sound waves). If resistance is less than about 30Ω, the buzzer will sound, indicating continuity.

Can I measure current without breaking the circuit?

No, the HV-60 requires breaking the circuit to measure current. For AC/DC current up to 10A, connect the probes in series with the load. For currents above 200mA, use the 10A jack. Never measure current on circuits exceeding 10A.

What safety precautions should I take?

Always check the test leads and multimeter for damage before use. Do not exceed the rated voltage or current. Use the correct input jacks and range. Do not measure voltages above 600V. Follow CAT II/CAT III safety guidelines.

How accurate is the HV-60?

The accuracy varies by function. For DC voltage, it is ±0.5% of reading + 2 digits. For AC voltage, ±1.0% of reading + 5 digits. Resistance accuracy is ±0.8% of reading + 2 digits. Refer to the manual for full specifications.

What does 'OL' mean on the display?

OL stands for Overload. It indicates that the measured value exceeds the selected range. Switch to a higher range to get a reading.

Can I measure capacitance with this multimeter?

Yes, set the rotary switch to the capacitance position (F). Discharge the capacitor completely before measuring. Connect the probes and read the capacitance value. The range is from 20nF to 200µF.

Is the HV-60 suitable for automotive testing?

It can be used for basic automotive tests like battery voltage, sensor signals, and continuity. However, it is not designed for high-energy systems like ignition coils. Use with caution and ensure the voltage is within CAT II limits.

Where can I find the user manual?

The user manual is available for free download on notice-facile.com in PDF format. It includes detailed instructions, specifications, and warranty information.

USER MANUAL HV-60 Sanwa

This warranty is valid only within Japan.

年 月 日	修理内容をご記入ください。