PSV90 - Power Supply Pyramid - Free user manual and instructions

Product Type	Upright Vacuum Cleaner
Brand	Pyramid
Model	PSV90
Dimensions (H x W x D)	35 cm x 30 cm x 45 cm
Weight	5.2 kg
Power Supply	220-240 V, 50/60 Hz
Power Consumption	1200 W
Dust Capacity	2.0 L
Filtration System	HEPA 13 washable filter
Cord Length	6 m
Noise Level	78 dB(A)
Suction Power	25 kPa
Operating Radius	9 m
Included Accessories	Crevice tool, dusting brush, upholstery nozzle
Floor Types	Carpet, hardwood, tile
Bagless	Yes, with transparent dust cup
Maintenance	Empty dust bin after each use; clean filter every 3 months
Safety Features	Thermal overload protection, automatic shut-off when overheating
Spare Parts	Replacement filters, belts, and brush roll available
Repairability Index	7/10 (easy to access main components)
Certification	CE, RoHS
Warranty	2 years

Frequently Asked Questions - PSV90 Pyramid

How do I assemble the Pyramid PSV90 vacuum cleaner?

To assemble, insert the handle into the main body until it clicks. Attach the hose and desired nozzle. Refer to the user manual for diagrams.

How do I empty the dust bin?

Press the release button to remove the dust bin. Hold it over a trash can and press the bottom flap to empty. For best performance, empty after each use.

How often should I clean the filter?

Clean the HEPA filter every 3 months. Rinse with water and let dry completely for 24 hours before reinstalling. Do not use detergents.

The vacuum loses suction. What should I do?

Check if the dust bin is full, the filter is clogged, or the hose is blocked. Also inspect the brush roll for tangled hair or debris. Clear any obstructions.

Can I use the PSV90 on hardwood floors?

Yes, it is safe for hardwood floors. Use the hard floor setting or switch off the brush roll if available to avoid scratches.

How do I replace the brush roll?

Unplug the vacuum. Remove the bottom plate using a screwdriver. Slide out the old brush roll and insert the new one. Reattach the plate. Replacement brush rolls are available separately.

The vacuum overheats and shuts off. Why?

This may occur if the filter is clogged or the dust bin is full. Turn off and unplug, let it cool for 30 minutes, then clean the filter and empty the bin.

What spare parts are available for the PSV90?

You can purchase replacement filters, brush rolls, belts, and dust bin assemblies from authorized dealers or online.

How long is the power cord?

The power cord is 6 meters long, giving you an operating radius of approximately 9 meters.

Is the PSV90 bagless?

Yes, it is bagless with a transparent dust cup, so you can see when it needs emptying. No replacement bags required.

USER MANUAL PSV90 Pyramid

Black and white stylized illustration of a mountain range with no text or symbols

PYRAMID

MODEL: PSV90

9-AMP SWITCHING DC POWER SUPPLY

MODEL:PSV150

12-AMP SWITCHING DC POWER SUPPLY

Desktop Bench Power Supply

AC-to-DC Power Converter with USB Charger and Vehicle Cigarette Lighter Socket

USER MANUAL

FEATURES

Your PYRAMID Heavy-Duty 9-Amp (PSV90) & 12-Amp (PSV150) Switching DC Power Supply is designed to use AC power-to-power equipment that requires 12V DC automotive power. The power supply converts standar 120V AC household power to 13.8V DC power and can supply up to 9-Amp (PSV90) & 12-Amp (PSV150) of continuous power.

Note: Your vehicle's electrical system provides 13.8 Volts when the engine is running.

If you are electronic hobbyist or technician, you will appreciate the many uses for the power supply at your workbench or in your house.

For example, use your CB mobile transceiver as a bass station, check the operation of auto sound system before you install them in your vehicle, or even power marine equipment such as pumps.

POWER SUPPLY FEATURES

Regulated Output Voltage-Makes it safe to use with mobile CBs, Ham radios, CD players, tape players or anything you would power with a vehicle's DC electrical system. Cooling and Fan Control a temperature controlled fan has been provided to improve cooling at high loads. It will come on only when the temperature of the power transformer is above 50°C or 122°F due to higher loads. In case the fan fails or the air flow is blocked, a second temperature sensor mounted on the power transformer will activate over temperature shut down at 100°C or 212°F. The output voltage will be automatically resumed once the unit cools down. Electronic Overload Protection-automatically shuts off standard 120V AC input power to the power supply when its output is overloaded. Overheat Protection Circuit automatically shuts off if it overheats. Combo Output Connectors-act as both binding posts and banana plug terminals.

CAUTION

RISK OF ELECTRICAL SHOCK DO NOT OPEN!

IMPORTANT SAFETY INSTRUCTIONS

DANGER: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.

WARNING: This unit should not be directly connected to a battery for charging or for battery back-up. Battery charging and battery back-up may be undertaken only when the battery is connected through suitable external isolating diodes and charge limiting resistor. The isolating diodes will ensure that battery does not back power the power supply. When a battery is deeply discharged, it will initially draw a very large charging current and force the power supply into current limit mode for prolonged periods. This is harmful for the power supply. The charge limiting resistor will limit the charging current to ensure the maximum charging current is well below the current limit value of the power supply.

This manual contains important safely and operating instructions for this power supply. Before you use the power supply, read all the instructions and cautionary markings in this manual, power ON the power supply, and the product that you will connect to the power supply, to reduce the risk of injury:

• Do not use the power supply near water (for example, a bathtub, washbowl, kitchen sink, laundry tub, wet basement, or swimming pool).
• Do not place the power supply on an unstable cart, stand or table. If the power supply falls, it could injure a person or cause serious damage to the power supply.
• Do not overload power outlets or extension cords. An overload can result in fire or electric shock.
• Do not use an extension cord unless absolutely necessary. Using an improper extension cord could result in a risk offire and electric shock. If an extension cord must be used, make sure:

a. The pins on the extension cord's plug are of the same number, size, and shape as those of the plug on the charger.
b. The extension cord is properly wired and in good electrical condition.
c. The extension cord's wire size is at least 18 AWG.

- Do not disassemble the charger; take it to a qualified service technician when service or repair is required. Improper reassembly may result in a risk of electric shock or fire.

- Do not use an attachment not recommended, this could result in a risk of fire, electric shock, or injury to persons.

- Never push any object into the slot in the power supply. It could touch dangerous voltage points or short out parts resulting in a fire or electrical shock.

CAUTION: TO REDUCE THE RISK OF DAMAGE

• Do not expose the power supply to rain or excessive moisture.
• Do not operate the power supply if it has been dropped or damaged in any way. Take it to a qualified service technician for repair.
• Slots and openings on the back and bottom of the power supply's cabinet are for ventilation. To ensure the power supply's reliable operation and to protect it from overheating, be sure these openings are not blocked or covered.
• The power supply should be operated only from a standard AC outlet that provides 120V AC/60 Hz, as indicated on the label. If you are not sure of the type of power supplied to your home, consult your local power company.
• For added safety, the power supply's polarized plug fits only into a polarized outlet. If your AC outlet is not designed for the polarized plug, have an electrician install the correct outlet, or use an adapter to ground the power supply safely.

Do not defeat the safety purpose of the plug.

• To protect the power supply during a lightning storm or when i is left unattended and unused for long periods of time, unplug it from the AC outlet.
This will prevent damage to the power supply from lightning and power surges.
- Do not operate the power supply with a damaged cord or plug- replace them immediately. To reduce the risk of damage to the electric plug and cord:

a. Make sure the cord is not located where it will be stepped on, tripped over, or otherwise subjected to damage or stress.
b. Disconnect the power supply by pulling the cord's plug rather than the cord.

- Unplug the power supply from the outlet before attempting any maintenance or cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning and then wipe it dry immediately.

- If your power supply dose not operate normally, in particular if any unusual sounds or smells come from it, unplug it immediately and contact a qualified service technician for repair.

CONNECTIONS

Caution : Make all other connections before you connect the power supply standard AC power.

1. Power ON/OFF: Set the power supply's POWER switch to ON or OFF.
2. USB Charge (5V/2A): Charge for Mobile phone

3. DC Outputs: Turn the sleeves of the red and black binding output posts counter clockwise to expose the wire hole.

4. Insert the device's negative wire (usually black) into the black binding post's wire hole, then tighten the binding post's sleeve to secure the wire in place.

5. Insert the device's positive wire (usually red) into the red binding post's wire hole, then tighten the binding post's sleeve to secure the wire in place.
6. If you are using the banana plugs connection, insert the plugs into the terminal's jack.

Note: The binding posts' wire holes can accommodate up to 16-gauge wire.

1. This unit features a car cigarette lighter jack conveniently located on the front panel.

WARNING: To avoid damage to both the power supply and the device used Follow the correct polarity when connecting the power supply and the device. Do not let the ends of the positive and negative wires make contact with each other.

1. Input Voltage Selective: Power Supply Switch at 115V/60Hz or 230V/50Hz
2. AC Power Supply Cable.

OPERATION

To use the power supply after you connect the device to it, set POWER to turn it on with the red led light illuminated.

If the power supply's POWER switch does not light, check all connections and confirm the wall AC outlet has power.

If the outlet has power, set POWER to OFF, reduce the load (by using a device that does not require more than 9/12 Amps), then set POWER to ON. Your power supply's overload protection circuit automatically shuts down the power supply when overload and resets by turning POWER to OFF.

CAUTION: Place your power supply in a well ventilated open and cool area. Do not block the openings at the fan suction on the sides and the discharge openings on the bottom.

CAUTON: To reduce the risk of energy hazard, be careful not to short the output terminal during operation. Remove the output connections after use.

CAUTION: Your power supply might cause TV or radio interference even when it is operating properly. To determine whether your power supply is causing the interference, turn off your power supply. If the interference goes away, your power supply is causing it.

Try to eliminate the interference by:

• Moving your power supply away from the receiver.
• Connecting your power supply to an outlet that is on a different electrical circuit from the receiver.
• Contacting a qualified service technician for help.

PSV90 - PSV150

Desktop Bench Power Supply

AC-to-DC Power Converter with USB Charge and Vehicle Cigarette Lighter Socket

	PSV90 PSV150
Continuous Power 12 Amp,	Max.9 Amp, Max.
Fuse Overload Protection		4A/250V2A/250V
Built-in Cooling Fan		√

Features:

• Regulated Electrical Power Supply Design
• AC-to-DC Power Conversion
- Provides Constant Source of DC Voltage
- Simple Electric Plug-in Operation
- Hassle-Free Screw Terminal Connectors
• Cigarette Lighter, Vehicle Accessory Power Connector
- USB Charge Port for Universal Device Charging
- Eliminates the Need of Battery or External Power Source
• Rugged & Durable Housing Construction
• LED Backlit ON / OFF Switch
- Compact, Home Desktop Workstation Power Supply Style
• Electronic Overload & Short Circuit Protection
- Pyramid Compact Hobby Power Supplies Safe for Tabletop Placement

• Used for Component & Device Equipment Testing, Operation & Performance

Technical Specs:

• Recommended Wire Cable Size: 18 (AWG) Gauge
• Load/Line Regulation: < + / - 5%
  • Output Voltage Accuracy: +/-0.02% Volts
• Ripple Output: 150mV
• USB Power: 5V/2A
  • Power Output: 13.8V DC
  • Power Supply: 115/230V, Voltage Selector

Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.

Black and white stylized illustration of three pyramids with no text or symbols

PYRAMID