Stealthbox SB-GM-ESCESV/10W1v3/TN - Subwoofer JL Audio - Free user manual and instructions
Find the device manual for free Stealthbox SB-GM-ESCESV/10W1v3/TN JL Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Brand | JL Audio |
| Model | Stealthbox SB-GM-ESCESV/10W1v3/TN |
| Product Type | Powered subwoofer enclosure (loaded) |
| Vehicle Fitment | Select GM trucks/SUVs (e.g., Chevy Silverado, Suburban, Tahoe) |
| Woofer Size | 10 inches |
| Woofer Model | 10W1v3 |
| Impedance | 4 ohms |
| Power Handling (RMS) | 300 Watts |
| Peak Power Handling | 600 Watts |
| Frequency Response | 20 Hz - 200 Hz |
| Sensitivity | 86 dB (1W/1m) |
| Enclosure Type | Custom fiberglass, vehicle-specific |
| Mounting Depth | 5.5 inches |
| Recommended Amplifier Power | 150 - 300 Watts RMS |
| Dimensions (Approx.) | 15" x 10" x 8" (varies by vehicle) |
| Net Weight | 20 lbs |
| Protection Features | Thermal and over-excursion protection (via amp) |
| Installation | Bolt-in, custom fit; no drilling required |
| Maintenance | Wipe with dry cloth; avoid moisture |
| Warranty | 1 year (JL Audio standard) |
Frequently Asked Questions - Stealthbox SB-GM-ESCESV/10W1v3/TN JL Audio
What vehicles is the Stealthbox SB-GM-ESCESV/10W1v3/TN designed for?
It is designed for specific GM trucks and SUVs, including Chevy Silverado (extended cab), Suburban, and Tahoe models. Verify fitment with JL Audio's vehicle selector tool.
What is the power handling of the subwoofer?
The 10W1v3 driver handles 300 Watts RMS and up to 600 Watts peak. Use an amplifier delivering 150-300 Watts RMS for optimal performance.
Does the Stealthbox come with a built-in amplifier?
No, it is a passive subwoofer enclosure. You need to purchase and connect an external amplifier to power it.
What is the impedance of the subwoofer?
The subwoofer has a nominal impedance of 4 ohms. It is compatible with most mono subwoofer amplifiers.
How do I install the Stealthbox?
The enclosure is designed to bolt directly into the vehicle using existing mounting points. No drilling is typically required. Follow the included installation guide for specific steps.
Can I replace the subwoofer driver if it fails?
Yes, the driver is replaceable. Use the same JL Audio 10W1v3 model for best performance. Contact JL Audio for service options.
What is the enclosure made of?
The enclosure is made of fiberglass molded to fit the vehicle's contours, ensuring a custom appearance and optimal acoustic performance.
Does the enclosure require any maintenance?
Minimal maintenance is needed. Wipe the exterior with a dry, soft cloth. Avoid exposing the enclosure to excessive moisture or direct sunlight.
What gauge wire should I use for the subwoofer?
Use 12-16 gauge speaker wire for the connection between the amplifier and the subwoofer. Ensure secure connections to avoid power loss.
Is the Stealthbox compatible with aftermarket head units?
Yes, it can be used with any aftermarket head unit that has a preamp output or with an amplifier that accepts speaker-level inputs. A line output converter may be needed if no RCA outputs are available.
User questions about Stealthbox SB-GM-ESCESV/10W1v3/TN JL Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual Stealthbox SB-GM-ESCESV/10W1v3/TN - JL Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Stealthbox SB-GM-ESCESV/10W1v3/TN by JL Audio.