CS110TG-TW3 - Subwoofer JL Audio - Free user manual and instructions
Find the device manual for free CS110TG-TW3 JL Audio in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Powered Subwoofer Enclosure |
| Brand | JL Audio |
| Model | CS110TG-TW3 |
| Driver Size | 10 inches |
| Driver Model | 10W3v3 |
| Enclosure Type | Sealed |
| Impedance | 2 ohms (Dual Voice Coil, wired to 4 ohms) |
| RMS Power Handling | 300 Watts |
| Peak Power Handling | 600 Watts |
| Frequency Response | 23 Hz - 200 Hz |
| Sensitivity | 84.1 dB (1W/1m) |
| Dimensions (Width x Height x Depth) | 12.375 in x 10.375 in x 7.125 in |
| Weight | 20 lbs (9.07 kg) |
| Grille Included | Yes, metal mesh grille |
| Wire Terminals | Nickel-plated binding posts |
| Recommended Woofer | JL Audio 10W3v3 (included) |
| Mounting | Free-air or enclosure installation |
| Cleaning | Wipe with soft, dry cloth; avoid moisture |
| Safety | Securely mount to vehicle; ensure proper fuse/wiring |
| Repair & Parts | Contact authorized JL Audio dealer; no user-serviceable parts |
Frequently Asked Questions - CS110TG-TW3 JL Audio
What amplifier power is recommended for the JL Audio CS110TG-TW3?
The CS110TG-TW3 is rated for 300W RMS and 600W peak. An amplifier delivering between 200W and 400W RMS at 4 ohms is ideal, such as the JL Audio JD400/4 or RD400/4.
Can I wire this subwoofer to a 2 ohm load?
No, the CS110TG-TW3 comes with the voice coils wired in series for a final impedance of 4 ohms. Wiring it to 2 ohms would require changing the internal connections, which is not recommended as it may void the warranty.
What is the enclosure type and volume?
It is a sealed enclosure. The internal air volume is approximately 0.65 cubic feet, optimized for the 10W3v3 driver.
Is the subwoofer compatible with factory car audio systems?
Yes, but you may need a line output converter (LOC) to tap into factory speaker wires and a remote turn-on lead. Ensure the amplifier can handle high-level inputs or use an LOC.
What are the dimensions for fitment in a vehicle?
The enclosure measures 12.375 in wide, 10.375 in tall, and 7.125 in deep. Allow at least 1 inch of clearance around the grille and terminals.
Does the CS110TG-TW3 come with mounting hardware?
Yes, it includes a metal grille and mounting screws. Additional brackets may be needed for secure installation in trucks or SUVs.
How should I clean and maintain the subwoofer?
Wipe the enclosure with a dry, soft cloth. Avoid spraying liquids directly. Check connections periodically for corrosion. The driver cone can be gently dusted.
What is the frequency range the subwoofer covers?
The CS110TG-TW3 reproduces frequencies from 23 Hz to 200 Hz. For best results, set your amplifier's low-pass filter between 80-120 Hz.
Can I use this subwoofer in a home audio system?
Yes, but you will need a dedicated subwoofer amplifier with a 12V trigger or a home audio amp that can drive a 4 ohm load. Ensure proper ventilation in a home environment.
Where can I find replacement parts or service?
Contact an authorized JL Audio dealer for any repairs or parts. The subwoofer is not user-serviceable; opening the enclosure may damage the driver.
User questions about CS110TG-TW3 JL Audio
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Subwoofer in PDF format for free! Find your manual CS110TG-TW3 - JL Audio and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CS110TG-TW3 by JL Audio.