BSEOG 091 - Air-conditioner BEKO - Free user manual and instructions
Find the device manual for free BSEOG 091 BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Model | BSEOG 091 |
| Brand | Beko |
| Cooling Capacity (BTU) | 9000 BTU |
| Heating Capacity (BTU) | 9000 BTU (Heat Pump) |
| Energy Efficiency Ratio (EER) | 3.2 W/W |
| Power Supply | 220-240 V, 50 Hz, 1 Ph |
| Rated Cooling Power Input | 820 W |
| Rated Heating Power Input | 800 W |
| Refrigerant Type | R32 |
| Indoor Unit Dimensions (W x H x D) | 795 x 290 x 200 mm |
| Outdoor Unit Dimensions (W x H x D) | 720 x 495 x 250 mm |
| Indoor Unit Weight | 9 kg |
| Outdoor Unit Weight | 22 kg |
| Noise Level Indoor (Low/High) | 24/34 dB(A) |
| Noise Level Outdoor | 50 dB(A) |
| Main Functions | Cooling, Heating, Fan, Dehumidifier, Auto Mode, Sleep Mode |
| Air Flow Rate (Indoor) | 480 m³/h |
| Filter Type | Washable Pre-filter |
| Remote Control | Yes (Infrared) |
| Timer | 24-hour On/Off Timer |
| Installation Type | Wall Mounted |
| Energy Label | Class A (Cooling) |
Frequently Asked Questions - BSEOG 091 BEKO
How to clean the air conditioner filters?
Turn off and unplug the unit. Open the front panel, remove the filters. Wash them with lukewarm water and mild detergent. Let them dry completely before reinstalling. Clean filters every 2 weeks for optimal performance.
What does error code E1 mean on my Beko air conditioner?
Error code E1 typically indicates a refrigerant leak or low refrigerant pressure. Contact a qualified technician for inspection and repair.
Can I use the air conditioner without remote control?
Yes, you can use the manual control buttons on the indoor unit. Usually there is a power button and mode selection button. However, some features like timer may not be accessible.
How to set the timer for off?
Press the Timer button on the remote until the clock icon flashes. Use + or - to set the desired off time (0-24 hours). Press Timer again to confirm. The unit will turn off after the set time.
What is the recommended temperature setting for cooling?
For energy efficiency and comfort, set the thermostat between 24°C and 26°C (75°F - 78°F) in cooling mode. Each degree lower increases energy consumption.
How often should I service my air conditioner?
It is recommended to have professional maintenance at least once a year. This includes checking refrigerant levels, cleaning coils, and inspecting electrical components.
Why is my air conditioner not cooling properly?
Possible causes: dirty filters, blocked outdoor unit, low refrigerant, or incorrect mode setting. Check filters first, ensure outdoor unit has clearance, and verify unit is in cool mode. If problem persists, call a technician.
Can I install the air conditioner myself?
Split air conditioners require professional installation due to refrigerant handling and electrical connections. It is strongly recommended to have a certified installer to avoid damage and void warranty.
What is the sleep mode function?
Sleep mode gradually adjusts the temperature (e.g., increases by 1°C per hour) to ensure comfortable sleep while saving energy. It also reduces fan noise. The unit will turn off after a set number of hours.
How do I switch between cooling and heating?
Use the Mode button on the remote control to cycle through Auto, Cool, Heat, Fan, and Dry modes. Select the desired mode. Note that heating is only available in heat pump models.
User questions about BSEOG 091 BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual BSEOG 091 - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BSEOG 091 by BEKO.