DFS26025X - Dishwasher BEKO - Free user manual and instructions
Find the device manual for free DFS26025X BEKO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Dishwasher |
| Model | DFS26025X |
| Brand | Beko |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | 45 kg |
| Power Supply | 220-240 V, 50 Hz, 10 A |
| Energy Class | A+++ |
| Water Consumption per Cycle | 9.5 L |
| Noise Level | 44 dBA |
| Place Settings | 14 |
| Programs | Eco, Auto, Intensive, Quick, Glass Care, Pre-Wash |
| Half Load Option | Yes |
| Delay Start | Up to 24 hours |
| Interior Light | Yes, LED |
| Adjustable Upper Basket | Yes, height adjustable |
| Third Rack | Yes, cutlery tray |
| Control Type | Electronic push button + LED display |
| Safety Features | Child lock, flood protection, overheating protection |
| Maintenance | Clean filters regularly, use dishwasher salt and rinse aid, descale periodically |
| Repairability | Spare parts available; user-replaceable filters, spray arms, door seal |
Frequently Asked Questions - DFS26025X BEKO
How do I install the Beko DFS26025X dishwasher?
Ensure the installation site has proper water supply and drainage. Connect the inlet hose to a cold water tap and the outlet hose to the drain. Level the appliance using the adjustable feet. For detailed steps, refer to the installation guide in the manual.
Which programs are available and what are they used for?
Common programs include: Eco for energy-saving normal loads, Auto for mixed loads with sensors, Intensive for heavily soiled pans, Quick for lightly soiled dishes (30 min), Glass Care for delicate glassware, and Pre-Wash for rinsing only.
How do I clean the dishwasher filters?
Turn off the appliance and remove the lower rack. Rotate and lift out the filter cassette. Rinse under running water and scrub if needed. Reassemble in reverse order. Clean filters at least once a month for optimal performance.
What should I do if the dishwasher displays an error code?
Refer to the manual's troubleshooting section. Common codes: E01 (water intake issue), E02 (drainage problem), E03 (heater fault). Try resetting by unplugging for 10 seconds. If error persists, contact Beko service.
Do I need to use dishwasher salt and rinse aid?
Yes, dishwasher salt is essential to prevent limescale buildup and soften water. Rinse aid improves drying and reduces spots. Fill the respective reservoirs before first use and refill when indicated.
Can I open the dishwasher during operation?
You can open the door to add a dish, but the cycle will pause. Be careful of hot steam. Close the door and press start to resume. Avoid opening frequently to conserve energy and water.
How do I use the half load option?
Load dishes in the upper basket only or as instructed. Select a program and press the Half Load button before starting. The cycle will reduce water and energy consumption for smaller loads.
What is the noise level of this dishwasher?
The Beko DFS26025X operates at a noise level of 44 dBA, which is very quiet and suitable for open-plan living areas.
How do I adjust the upper basket?
Pull out the upper basket fully. To raise it, lift both sides simultaneously and push up. To lower, press the levers on the sides and let it drop. Ensure it locks in place before loading.
Where can I find spare parts for this model?
Spare parts can be purchased from authorized Beko dealers or online. Common user-replaceable parts include filters, spray arms, and door seal. Use genuine parts for best performance.
User questions about DFS26025X BEKO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Dishwasher in PDF format for free! Find your manual DFS26025X - BEKO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DFS26025X by BEKO.