S16100 - Household Fan Lasko - Free user manual and instructions

Product Type	Tower Fan
Model	S16100
Brand	Lasko
Dimensions (H x W x D)	42.5 x 13.5 x 13.5 inches
Weight	12.5 lbs (5.7 kg)
Power Supply	120V, 60Hz, 0.5A
Wattage	60 Watts
Speed Settings	3 (Low, Medium, High)
Oscillation	Yes, 90 degrees
Timer	Yes, up to 7 hours
Remote Control	Yes, included
Airflow (max)	1500 CFM
Noise Level	52 dB (High speed)
Control Type	Touch panel + remote
Safety Features	Automatic shut-off when tipped over
Cleaning	Wipe with a damp cloth; do not immerse
Warranty	1 year limited warranty
Included Accessories	Remote control, user manual
Repairability	Non-user serviceable; contact Lasko support
Recommended Room Size	Up to 200 sq. ft.

Frequently Asked Questions - S16100 Lasko

How do I clean the Lasko S16100 fan?

Unplug the fan before cleaning. Use a soft, damp cloth to wipe the exterior and grate. Do not use harsh chemicals or immerse the fan in water. For dust buildup, use a vacuum with a brush attachment.

Why is the remote control not working?

First, check if the batteries are inserted correctly and with the correct polarity (+/-). Replace batteries if needed. Ensure no obstructions between the remote and the fan's sensor. Try resetting by unplugging the fan for 30 seconds.

Does the S16100 fan have an auto shut-off?

Yes, the Lasko S16100 is equipped with a tip-over safety switch that automatically shuts off the fan if it is knocked over, preventing accidents.

How do I set the timer on this fan?

Press the Timer button on the control panel or remote to cycle through preset hours (1, 2, 4, 8 hours). The fan will automatically turn off after the selected time.

Can I use this fan outdoors?

The Lasko S16100 is designed for indoor use only. Exposure to moisture or extreme temperatures can damage the fan and pose safety risks.

How do I oscillate the fan?

Press the Oscillation button on the fan body or remote control to start or stop the side-to-side movement. The fan oscillates at a 90-degree angle.

What should I do if the fan makes a loud noise?

Ensure the fan is on a level, stable surface. Check for loose parts or debris in the grille. If noise persists, contact Lasko customer support as it may indicate a motor issue.

Does this fan come with a warranty?

Yes, the Lasko S16100 includes a 1-year limited warranty from the date of purchase. Keep your receipt for warranty claims.

Can I adjust the height of the tower fan?

The S16100 has a fixed height and cannot be adjusted. However, its 42.5-inch height is suitable for most rooms and provides airflow at an optimal level.

How do I replace the fuse or repair the fan?

The fan is not user-serviceable. Do not attempt to open or repair it yourself. Contact Lasko customer service for authorized repair or replacement options.

USER MANUAL S16100 Lasko

⚠ WARNING To reduce the risk of electrical shock and fire please observe the following instructions:

- Always unplug the cord before moving, servicing or cleaning.

Disassembled grills may be immersed to be cleaned with a mild detergent and water. Wipe all other parts with soft cloth moistened with water and mild detergent only. DRY ALL PARTS COMPLETELY BEFORE REASSEMBLING. After any maintenance or servicing, completely reassemble unit as described in this instruction manual before reconnecting to the power supply.

NEVER use ALCOHOL or SOLVENTS such as gasoline, bonzone, paint thinner, or other harsh cleaners.

SERVICING: For servicing, other than general user maintenance, please contact Customer Service at 800-233-0268, Monday through Friday, from 8am-5pm Eastern. STORAGE: Store the Fan with those Instructions, in the original carton in a cool, dry place. LUBRICATION: Motor is permanently fabricated

LASKO PRODUCTS, INC. LIMITED WARRANTY (VALID IN THE USA, ITS TERRITORIES, AND CANADA ONLY) WHAT THIS WARRANTY COVERS: This product is warranted against defects in workshop and/or materials. HOW LONG THIS WARRANTY LASTS: This warranty extends only to the original purchaser of the product and lasts for one (1) year from the date of original purchase or until the original purchaser of the product sells or transfers the product, whichever first occurs. WHAT LASKO WILL DO: During the warranty period, Lasko will, at its sole option, repair or replace any part or parts that prove to be defective or replace the whole product with the same or comparable model.

WHAT THIS WARRANTY DOES NOT COVER: This warranty does not apply if the product was damaged or failed because of accident, improper handling or operation, shipping damage, abuse, misuse, unauthorized reports made or attempted, or the use of the product for commercial or nonresidential service. This warranty does not cover any liability whatsoever arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any loss arising from any

CUSTOMER SERVICE:

Your Customer Service team is available to assist you with product and service questions, and replacement parts. They can be reached Monday through Friday, Bam-Spm Eastern. Please have your model number available, we use this type by style (limited on the underside of your product). Customer Service Dept., 020 Lincoln Ave., West Chester, PA 19300

This Fan is for residential use only. It is not intended to be used in commercial, industrial or agricultural settings.

Register Your Product Today www.laskoproducts.com/registration You will benefit from: - efficient and enhanced support - future product updates scan with a smart phone

READ AND SAVE THESE INSTRUCTIONS

READ CAREFULLY BEFORE ATTEMPTING TO ASSEMBLE, INSTALL, OPERATE OR MAINTAIN THE PRODUCT DESCRIBED. PROTECT YOURSELF AND OTHERS BY OBSERVING ALL SAFETY INFORMATION. FAILURE TO COMPLY WITH INSTRUCTIONS COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE! KEEP INSTRUCTIONS FOR FUTURE REFERENCE.

SAVE THESE INSTRUCTIONS

LEA Y GUARDE ESTAS INSTRUCCIONES

GENERAL SAFETY INFORMATION

When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electrical shock and injury to persons, including the following:

Read all instructions before using this Fan.

1. Make certain the power sources conforms to the electrical requirements of the Far
2. Make certain that the room is equipped with a working smoke detector
3. Use this Fan only as described in this manual. Any other law not recommended by the manufacturer may cause fire, electrical shock, or injury to persons.
4. To reduce the risk of personal injury and electric shock, the Fan should not be placed with or placed where small children can reach it.
5. Unplug power cord before installing, servicing, or moving the Fan. DO NOT DEPEND ON THE ON/OFF SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER WHEN SERVICING OR MOVING THE FAN. ALWAYS UNPLUG THE POWER CORD. ALWAYS TURN OFF AND UNPLUG FAN BEFORE LEAVING THE AREA. NEVER LEAVE CHILDREN UNATTENDED WHEN THE FAN IS ON OR PLUCED IN.
6. This Fan must NOT be used in potentially dangerous locations such as flammable, explosive, chemical-laden or wet atmosphere where gasoline, paint or flammable
7. DO NOT use Fan In or near a window. Rain may create an electrical hazard.
8. Completely assemble Fan, according to instructions, before connecting to
   The electric shock and electric shock shall be taken into the following parts of the safety device: Electric shock, which is a type of electric shock, this plug is intended to fit in a polarized outlet only one way. Match inside the mode of plug to marks a lot, fully used. If the plug does not fit safely in the outlets, reverse the plug. If it still does not fit, contact a qualified electron. DO NOT attempt to use the power of the plug to mark a lot, fully used. If the plug does not contain a suitable reserve that can be replaced by a preferred power source. Drilling process for the plug is necessary to reduce the risk of fire, electric shock and electric shock shall be taken into the following parts of the safety device: Electric shock and electric shock shall be taken into the safety device incorporated in this plug. Call 800-233-0260, Monday - Friday, between 12:00 a.m. and 5:00 p.m. EST. If the plug warning label is missing or damaged, call 800-233-0260, Monday - Friday, between 12:00 a.m. and 5:00 p.m. EST.
9. Where possible, avoid the use of extension cords because the extension card may overheat and cause a fire. If you must use an extension cord, minimize the risk of overhosting by using the shortest cord possible and ensuring that it is UL listed, NEVER use a single extension card to operate more than one Fan. Do not plug Fan into any other cord connected devices, such as a power strip, card reel, surge protector, multiple outlet adaptors or outlet-type air treatments. The use of such devices may create a fire hazard.
10. NEVER operate any Fan with a damaged cord or plug or after the Fan malfunctions, has been dropped or damaged in any manner.
11. NEVER insert or allow fingers or foreign objects to enter any ventilation or exhaust opening as it may cause an electric shock or fire, or damage the Fan. To reduce the risk of low, DO NOT block or buffer with the fan in any manner whilst it is in operating
12. Always place the Fan on a stable, flat, level surface when operating, to avoid the chance of the Fan overturning. Locate the Power Cord so the Fan or other objects are not resting on it. Do not run cord under carrotting. Do not cover cord with throw pins, runners, or similar coverings. Do not route cord under furnace or appliances. Arrange
13. This Fan is not intended for use in well or clamp locations. NEVER locates a Fan where it may fall into a bathtub or other water container. NEVER use Fan where flammable liquids are used or stored.
14. NEVER use Fan outdoors.
15. This Fan is not suitable for use in agricultural facilities including areas where livestock, poultry or other animals are confined. Please refer to National Electric Code (NEC)
    Article 047-7 (2006), or applicable 50% of local codes or standards relating to electrical requirements for Agricultural Buildings. THIS RAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 047-7 (2006).
16. THIS FAN IS NOT SODDER FOR LAW IN RESOURCES, INFORMATION. I-WEAM NOW TO NATIONS EXECUTIVE ROOM (NEC) ARTICLE 500 or APPRECESSIONAL ROOM OF LOCAL CITIES BY ANOTHERS MEETING IN ELECTRICAL REQUIREMENTS FOR HAZARIOUS LOCATIONS. THIS FAN DOES NOT MEET THE REQUIREMENTS OF NEC ARTICLE 500 (2008).

⚠ WARNING

REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK - DO NOT USE THIS FAN WITH ANY SOLID STATE

SPEED CONTROL DEVICES.

SAVE THESE INSTRUCTIONS

ADVERTENCIA

STEP 1: PIPE ASSEMBLY PASO 1: ARMADO DE LA TUBERIA

1. Take pipe assembly out of carton as shown. (Figure 1)

Loudell Height Adjustment Not turning Counter clockwise. (Figure 2) Raise Extruding Pipe. (Figure 3).

Tighten Height Adjustment Nut turning clockwise. (Figure 4)

1. With a twisting motion, insert the end of the

large diameter pipe into hole in Base. (Figure 5)

Turning pipe while pushing will assure pipe is fully sorted in Base

Sealut in Base. For Height Adjustment:

a) Loose Height Adjustment Nut.

b) Raise or lower Extension Pipe to

c) Tighten Height

1. Utilizando un momento agistente.

STEP 3: HEAD ASSEMBLY

STEP 2: CONJUNTO DE LA

dis eje the motor. (Figure 8A)

New 9/11

Do Not take pipe apart.
Should pipe be borne separated, insert pine A
separated, insert pipe A into pipe B.
No items by
separados, la
tuberismo deben ze
separados, inserte un tubo
en tubo B

1. To secure Blade, screw Spinner into Shaft Counter

Cboewise until light on blade hub. With for head in upright position, slim Segment

With rail head in upright position, sigh ornament of Frost Grill so it in horizontal and dry tie up. By

or front grill so in horizontal and right side up, by starting with the top of the grill and working down.

insert Snaps on Bear Grill through Slots in Front Grill.

Figure 9

1. Pare aargate la finix, enquisitive mode que could

OSCILLATION: Push

down oscillation knob en

SPEED: Control fan speed with Speed

Switch at rear of motor. (Figure 12)

3 - High Speed 2 - Medium Speed

2 - Medium speed 1 - Low Speed

VII CODIG: AI

TILTING: This Fan is equipped with a multi-angle Fan Head for Whole-Room Air Circulation. Follow the stops below to properly adjust the "tilt angle" of your Fan. (Figure 13)

Place one hand on the pole just under the Fan Neck.

Place your other hand on top of Far

Gently push or pull the Fan Head until it is in the desire

position