ATNQ60GMLA5 - Air Conditioning LG - Free user manual and instructions
Find the device manual for free ATNQ60GMLA5 LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Ducted Air Conditioning Unit (Multi-Split) |
| Brand | LG |
| Model | ATNQ60GMLA5 |
| Cooling Capacity | 60,000 BTU/h (5 tons) |
| Heating Capacity | 67,000 BTU/h |
| Dimensions (Unit) | Approx. 1,800 x 900 x 400 mm (W x H x D) |
| Weight (Unit) | Approx. 105 kg |
| Power Supply | 380-415V, 3-Phase, 50/60 Hz |
| Refrigerant | R410A |
| Airflow Rate (High) | 3,000 CFM |
| Energy Efficiency Ratio (EER) | 10.5 |
| Sound Level (Indoor) | 48 dB(A) |
| Sound Level (Outdoor) | 58 dB(A) |
| Key Functions | Cooling, Heating, Dehumidification, Fan, Auto Mode |
| Maintenance | Clean air filter every 2 weeks; inspect drain pan annually |
| Safety Features | Overload protection, auto restart, refrigerant leak detection |
| Spare Parts & Repairability | Filters, fan motors, compressors available; service manual included |
| General Information | Indoor unit only; requires matching outdoor unit (LG multi-split) |
Frequently Asked Questions - ATNQ60GMLA5 LG
What refrigerant does the LG ATNQ60GMLA5 use?
The unit uses R410A refrigerant, which is a common HFC blend for commercial air conditioners. Always consult a certified technician for handling.
How often should I clean the air filter?
Clean the air filter every two weeks under normal usage. A clogged filter reduces efficiency and airflow. Wash with water and dry completely before reinserting.
What is the power requirement for this unit?
The ATNQ60GMLA5 requires a 380-415V, 3-phase, 50/60 Hz power supply. Ensure proper circuit breaker sizing (typically 40A) and professional installation.
Can this unit be used for heating?
Yes, it is a heat pump model providing both cooling and heating. The heating capacity is approximately 67,000 BTU/h. It operates efficiently down to -10°C outdoor.
What is the maximum duct length?
Maximum duct length depends on static pressure; typically up to 30 meters for this model. Refer to the installation manual for specific duct design.
How do I reset the unit after a power outage?
After power is restored, the unit auto-restarts after 3 minutes. To manually reset, turn off the unit, wait 10 seconds, then turn it on via the remote or controller.
What does error code 'E6' mean?
Error code E6 indicates a communication fault between indoor and outdoor units. Check wiring connections and cable continuity. If persists, call a technician.
Is the ATNQ60GMLA5 compatible with LG Smart ThinQ?
This model supports LG Smart ThinQ via an optional Wi-Fi kit. You can control temperature, modes, and schedule from your smartphone.
What are the recommended clearances for installation?
Maintain at least 1 meter clearance on the front and sides, and 50 cm from the ceiling. Allow 20 cm behind the unit for air intake.
Where can I find the serial number?
The serial number is on a label on the right side of the indoor unit near the electrical box. It is required for warranty claims and spare parts ordering.
User questions about ATNQ60GMLA5 LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air Conditioning in PDF format for free! Find your manual ATNQ60GMLA5 - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ATNQ60GMLA5 by LG.