Mobility Exchange 7131 - Access Point Brocade - Free user manual and instructions
Find the device manual for free Mobility Exchange 7131 Brocade in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | Brocade |
| Model | Mobility Exchange 7131 |
| Dimensions (W x D x H) | Approx. 220 x 220 x 45 mm |
| Weight | Approx. 1.2 kg |
| Power Supply | PoE (802.3af) or 12V DC adapter |
| Wireless Standards | IEEE 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz and 5 GHz |
| Max Data Rate | Up to 300 Mbps per radio |
| Antenna | Internal dual-band antennas (3x3 MIMO) |
| Ethernet Ports | 2 x 10/100/1000 Ethernet (RJ-45) |
| Management | Web GUI, CLI, SNMP, Brocade management system |
| Security | WPA2, 802.1X, RADIUS, MAC filtering, rogue AP detection |
| Mounting | Wall or ceiling mount (bracket included) |
| Operating Temperature | 0°C to 40°C |
| Compliance | FCC, CE, IC |
| Maintenance | Keep clean with dry cloth, avoid liquids |
| Power Consumption | Max 12W |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - Mobility Exchange 7131 Brocade
How do I reset the Brocade Mobility Exchange 7131 to factory defaults?
Press and hold the reset button on the back panel for 10 seconds using a paperclip. The device will reboot with factory settings.
What is the default IP address and login for the access point?
The default IP is 192.168.1.1, username admin and password password. Change these immediately for security.
Can I power the device using PoE?
Yes, the device supports 802.3af PoE. Use a PoE switch or injector. Alternatively, use the optional 12V DC power adapter.
How do I update the firmware?
Download the latest firmware from Brocade's support site. Log into the web interface, go to Administration > Upgrade, select the file, and apply. Do not power off during update.
What wireless security options are available?
It supports WEP, WPA/WPA2 Personal and Enterprise (802.1X with RADIUS), and MAC address filtering. WPA2-AES is recommended.
Can I mount the access point on a wall?
Yes, the package includes a mounting bracket for wall or ceiling. Secure the bracket with screws, then slide the device into place.
How do I configure multiple SSIDs?
In the web interface, go to Wireless > SSID and add new SSIDs. Each can have its own VLAN, security, and bandwidth limits.
What does the LED status indicate?
Solid green means normal operation. Blinking green indicates traffic. Orange means booting or error. No light means no power.
Is the device compatible with 802.11n?
Yes, it supports 802.11a/b/g/n on both 2.4 GHz and 5 GHz bands with up to 300 Mbps per radio.
How do I troubleshoot connectivity issues?
Check PoE or power, ensure Ethernet cable is intact, verify SSID and password, try a different channel, and check for interference. Use the web interface logs.
User questions about Mobility Exchange 7131 Brocade
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual Mobility Exchange 7131 - Brocade and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Mobility Exchange 7131 by Brocade.