CD-C477H - Hi-Fi System SHARP - Free user manual and instructions

Product Type	Hi-Fi System
Brand	Sharp
Model	CD-C477H
Dimensions (Main Unit)	430 x 140 x 310 mm
Weight (Main Unit)	5.2 kg
Power Supply	AC 120V/230V, 50/60Hz
Power Consumption	80 W
Output Power	2 x 30 W RMS
Frequency Response	20 Hz - 20 kHz
Signal-to-Noise Ratio	> 70 dB
Speaker Type	2-way bass reflex
Playback Media	CD, Cassette, FM/AM Radio
Inputs	Aux (RCA), Headphone (3.5 mm)
Outputs	Speaker terminals, Headphone
Main Functions	CD player, cassette deck, FM/AM tuner, clock, timer, equalizer
Maintenance & Cleaning	Wipe with a soft dry cloth. Do not use solvents.
Safety Precautions	Do not expose to moisture; unplug before cleaning.
Spare Parts Availability	Contact Sharp customer service
Repairability Index	8/10 (estimated)

Frequently Asked Questions - CD-C477H SHARP

How do I set the clock on the Sharp CD-C477H?

Press the CLOCK button on the remote or main unit. Use the TUNING buttons to adjust hours and minutes. Press SET to confirm.

Can I play MP3 CDs on this system?

The CD-C477H is designed for standard audio CDs. It does not support MP3 or CD-RW playback.

How do I connect an external device like a smartphone?

Use the Aux In input on the front panel. Connect via a 3.5 mm to RCA cable, then select Aux as the source.

How do I clean the cassette tape heads?

Use a dry or wet cassette head cleaner available at electronics stores. Insert it into the cassette deck and play for a few seconds.

Why is there no sound from the speakers?

Check that the speaker wires are firmly connected to the terminals. Ensure the volume is not at minimum and the mute function is off.

How do I program the CD player to play tracks in a specific order?

Press MEMORY while the CD is stopped. Use the SKIP buttons to select a track, then press MEMORY again. Repeat for up to 20 tracks. Press PLAY to start.

Can I use the tuner without an external antenna?

The system includes a built-in antenna for FM/AM. For best FM reception, extend the wire antenna fully.

How do I reset the system to factory settings?

Unplug the unit from the power outlet for at least 30 seconds. Plug it back in while holding the MEMORY and PLAY buttons until 'CLEAR' appears.

What should I do if the CD tray does not open?

Ensure the system is powered on. Gently press the OPEN/CLOSE button. If it still doesn't open, unplug for 10 minutes and try again. If persists, contact service.

How do I clean the fascia and knobs?

Use a soft, lint-free cloth slightly dampened with water. Dry immediately. Do not use abrasive cleaners or alcohol.

USER MANUAL CD-C477H SHARP

SPECIAL NOTES

This equipment complies with the requirements of Directives 89/336/EEC and 73/23/EEC as amended by 93/68/EEC.

Audio-visual material may consist of copyrighted works which must not be recorded without the authority of the owner of the copyright. Please refer to relevant law in your country.

When the ON/STAND-BY button is set at STAND-BY position, mains voltage is still present inside the unit. When the ON/STAND-BY button is set at STAND-BY position and the clock is displayed, the unit may be brought into operation by the timer mode or remote control.

Warning:

This unit contains no user serviceable parts. Never remove covers unless qualified to do so. This unit contains dangerous voltages, always remove mains plug from the socket before any service operation and when not in use for a long period.

THIS APPARATUS IS CONNECTED TO 230 V AC WHEN THE PLUG IS INSERTED INTO THE WALL OUTLET. TO COMPLETELY DISCONNECT THE APPARATUS, PLEASE PULL OUT THE PLUG.

CAUTION

Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.

As the laser beam used in this compact disc player is harmful to the eyes, do not attempt to disassemble the cabinet. Refer servicing to qualified personnel only.

WARNING: THIS PRODUCT IS EQUIPPED WITH A LASER. INCORRECT HANDLING OF THE DEVICE IN CONTRADICTION WITH THIS MANUAL MAY RESULT IN DANGEROUS RADIATION. DO NOT OPEN OR REMOVE ANY COVERS AND DO NOT REPAIR THE DEVICE. ENTRUST REPAIR AND SERVICING TO QUALIFIED SERVICE PERSONNEL.

WARNING: THIS PRODUCT IS EQUIPPED WITH A LASER. INCORRECT HANDLING OF THE DEVICE IN CONTRADICTION WITH THIS MANUAL MAY RESULT IN DANGEROUS RADIATION. DO NOT OPEN OR REMOVE ANY COVERS AND DO NOT REPAIR THE DEVICE. ENTRUST REPAIR AND SERVICING TO QUALIFIED SERVICE PERSONNEL.

CLASS 1 LASER PRODUCT

CLASS 1 LASER APPARATUS

CLASS 1 LASER PRODUCT

LASER CLASS 1

CLASS 1 LASER DEVICE

CLASS 1 LASER APPARATUS

LASER CLASS 1

LASER CLASS 1

Emission Duration: continuous

Laser Output: max. 0.6 mW

CAUTION-INVISIBLE LASER RADIATION WHEN OPEN, DO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTS

WARNING - INVISIBLE LASER RADIATION WHEN THIS PART IS OPEN. DO NOT STARE INTO THE BEAM AND DO NOT VIEW THE BEAM WITH OPTICAL INSTRUMENTS.

ADVERSE LASER RADIATION AT OPENING. DO NOT LOOK INTO THE BEAM, NOR WITH OPTICAL INSTRUMENTS.

WARNING! WHEN OPEN, YOU ARE EXPOSED TO INVISIBLE LASER RADIATION. DO NOT STARE INTO THE BEAM OR VIEW IT WITH OPTICAL INSTRUMENTS

WARNING - INVISIBLE LASER RADIATION WHEN THIS PART IS OPEN. DO NOT STARE INTO THE BEAM OR VIEW THE BEAM WITH OPTICAL INSTRUMENTS.

ADVERSE LASER RADIATION ON THE COVER. OPENING, INSERTING STRAPS INTO THE BEAM OR VIEWING DIRECTLY WITH OPTICAL INSTRUMENTS.

WARNING! USING THE DEVICE IN A WAY OTHER THAN THAT SPECIFIED IN THIS

MANUAL MAY EXPOSE THE USER TO INVISIBLE LASER RADIATION EXCEEDING SAFETY CLASS 1.

WARNING - IF THE APPARATUS IS USED IN A MANNER OTHER THAN SPECIFIED IN THIS USER MANUAL, THE USER MAY BE EXPOSED TO INVISIBLE LASER RADIATION THAT EXCEEDS THE LIMIT FOR LASER CLASS 1.

GERMAN

INTRODUCTION

Remote control × 1

FM antenna × 1

Note:

NO

YES Correct

Cassette

● Surround speakers

Volume

Tuning

EDUCATE: educational programs.

ALARM: emergency broadcasts.

NEWS	AFFAIRS	INFO	SPORT	EDUCATE
DRAMA	CULTURE	SCIENCE	VARIED	POP M
ROCK M	M.O.R. M	LIGHT M	CLASSICS	OTHER M
ALARM	TP*	TA

4

5

6

7

Video/Aux (Audio signal) input

IF "PROTECT" IS DISPLAYED

Internal maintenance

Thank you for purchasing this SHARP product.

To obtain the best performance from this product, please read this manual carefully. It will guide you in operating your SHARP product.

CONTENTS

	Page
ACCESSORIES	1
PRECAUTIONS	2
NAMES OF CONTROLS AND INDICATORS	3-6
PREPARATION FOR USE	7-12
SETTING THE CLOCK	13
SOUND CONTROL	14-15
SURROUND EFFECT CONTROL	16-17
COMPACT DISC OPERATION	18-21
RADIO OPERATION	22-23
RDS (Radio Data System) OPERATION	24-29
CASSETTE OPERATION	30

	Page
RECORDING	31-32
HOW TO USE THE BUILT-IN TIMER	33-35
USING EXTERNAL UNITS	36
TRANSPORTING THE UNIT	37
RESETTING THE MICROCOMPUTER	37
WHEN "PROTECT" APPEARS	37
MAINTENANCE	38
SPECIFICATIONS	39

ACCESSORIES

Remote control × 1

FM aerial × 1

MW/LW loop aerial × 1

Note:

Parts and accessories mentioned in this operation manual other than those in the drawing are not included.

MEMORANDUM/MÉMORANDUM/MEMORÁNDUM/ANTECKNINGAR /ANNOTAZIONI/MEMORANDUM/MEMO

SHARP

SHARP CORPORATION