HG 70 - Glue gun Cocraft - Free user manual and instructions

Product Type	Glue gun
Brand	Cocraft
Model	HG 70
Power	70 W (25 W standby)
Voltage	220–240 V AC, 50 Hz
Warm-up Time	3–5 minutes
Max Nozzle Temperature	200 °C
Weight	0.2 kg
Cable Length	1.4 m
Protection Class	Class II (double insulated)
Glue Stick Size	Diameter 11 mm, length 150 mm
Included Glue Sticks	6 pieces
Stand	Fold-out stand for upright placement
Trigger Mechanism	Feed trigger for glue stick
Application Materials	Wood, paper, cardboard, certain plastics
Safety Features	Double insulation, burn hazard warning, do not leave unattended
Cleaning Instructions	Use damp cloth with mild detergent; unplug before cleaning
Storage	Let cool completely; place on stand during cooldown
Disposal	Recycle according to EU WEEE directive

Frequently Asked Questions - HG 70 Cocraft

How long does it take for the glue gun to heat up?

The glue gun reaches operating temperature in 3–5 minutes. Plug it in and rest it on its stand before use.

What type of glue sticks should I use?

Use glue sticks with a diameter of 11 mm and length of 150 mm. The included sticks are specifically designed for this model.

Can I use the glue gun on metal or glass?

This glue gun is designed for wood, paper, cardboard, and certain plastics. It is not recommended for metal or glass unless specified by the glue stick manufacturer.

What is the maximum temperature of the nozzle?

The nozzle and molten adhesive can reach up to 200 °C. Avoid skin contact to prevent burns.

Is the glue gun double insulated?

Yes, it is a Class II product with double insulation, meaning no earth connection is required. It still requires proper use.

How do I clean the glue gun?

Always unplug the glue gun before cleaning. Wipe the exterior with a lightly moistened cloth and mild detergent. Do not use solvents or corrosive chemicals.

Can I leave the glue gun unattended while plugged in?

No, never leave the glue gun unsupervised when connected to a power source. Always unplug it after use.

What should I do if the glue stick gets stuck?

Do not attempt to pull out a stuck glue stick while hot. Allow the gun to cool completely, then gently remove it. If stuck, warm up slightly and try again. Never force it.

How should I store the glue gun after use?

Place the glue gun on its stand and let it cool completely. Unplug it and store in a dry place away from children.

Is respiratory protection necessary?

Yes, use respiratory protection when gluing, as fumes may be harmful. Work in a well-ventilated area.

USER MANUAL HG 70 Cocraft

Please read the entire instruction manual before using the product and then save it for future reference. We reserve the right for any errors in text or images and any necessary charges made to technical data. In the event of technical problems or other queries, please contact our Customer Services.

Safety

Symbol guide

Caution! The nozzle and adjoining surfaces become hot during use. Contact may cause burns.

Class II product. Double-insulated.

Warning for a possible hazard which could lead to serious personal injury and/or damage to the product if the stated instructions are not followed.

Warning for an electrical shock hazard.

Unplug the product immediately if the mains lead has been damaged or when inspecting it.

Use respiratory protection.

General safety instructions

• This product must not be used by anyone (including children) suffering from physical or mental impairment. This product should not be used by anyone that has not read the instruction manual unless they have been instructed in its use by someone who will take responsibility for their safety. Never let children play with the product.
• Keep children away from the packaging materials. Chicking hazard.
  • The product should not be used if it is in any way damaged or malfunctioning
• Never attempt to modify the product in any way.
• Any repairs should only be carried out by qualified service technicians.

Electrical safety

Warning for an electrical shock hazard.
- Do not use the product if it is missing parts or if its housing has been damaged in any way.
- Do not place the product where there is a risk of it falling into water or other types of liquid.
- The product should only be connected to a 220–240 V, 50 Hz electrical outlet.
- Outdoor use of the product requires that any wall socket used be equipped with a max 30 mA RCD. Check the RCD before each use. Use of an RCD reduces the risk of electric shock.
- The mains lead should be checked regularly. Never use the product if the mains lead or plug is damaged.

• If the mains lead has been damaged, it must only be replaced by the manufacturer, authorised service facility or qualified tradesman. This is to prevent the risk of electric shock or fire.
• Never touch the mains plug if your hands are moist or wet.
  • Always grip the plug when unplugging the product, never pull the mains lead.
• Never carry or hang the product by its mains lead.

Product specific safety instructions

• Place the product in a standing position after use and let it cool sufficiently before putting it away for storage.
• Do not leave the product unsupervised when it is connected to an electrical socket.
• Never cover the product when it is connected to an electrical socket.
• Never expose the product to rain or moisture.
  • Always disconnect the mains lead from the wall socket when you have finished work or when the product is not being used.
• Unplug the product and let it cool completely before putting it away for storage.
• Both the glue and nozzle become very hot during use. This can cause burn injuries. Rinse any burn with cold water and keep it under running water for some time.
• Only use glue sticks specifically designed for this product.
  • Always place the product on its stand when it is not in use.

Product description

Contents

- 1 x glue gun

- 6 × glue sticks, C 11 × 150 mm

Application

This glue gun can be used for giving wood, paper, cardboard and certain plastic materials.

Glue gun

1. Nozzle

2. Glue stick hole

3. Glue stick

4. Handle

5. Mains load

6. Trigger

7. Stand

Instructions for use

Preparations

• Keep the work area clean and well lit.
• Clean the contact surfaces. The surfaces should be dry and clear of dust or grease. Smooth surfaces should be roughed before gluing.

- Plug the glue gun into an electrical socket and rest it on its stand (7) for 3–5 minutes to let it reach operating temperature.

Gluing

Use respiratory protection.

Warning: Burn hazard. The molten adhesive and nozzle reach temperatures of up to 200 °C. Avoid all skin contact with the nozzle (1) and molten adhesive whilst working.

1. Grip the glue gun by the handle (4) and insert a glue stick into the hole (2) at the rear of the gun.
2. Squeeze the trigger (6) a few times until the feed mechanism has gripped the glue stick.
3. Gently squeeze the trigger to apply molten adhesive to the surfaces to be glued together.
4. Release the trigger and squeeze it again if the trigger was squeezed all the way in before you had finished applying glue to the contact surfaces
5. Release the trigger when the surfaces have been coated with glue.
6. Immediately press the surfaces together and hold them in position for 15 seconds.
7. Let any excess gua cool and remove it with a sharp knife.
8. Unplug the glue gun from the wall socket to switch the gun off.
9. Rest the glue gun on its stand to cool completely before pulling it away.

Warning: Do not attempt to remove the glue stick from the glue gun. Dong so can result in personal injury and/or damage the product.

Care and maintenance

• Always unpug the product from the wall socket before cleaning
- Clean the product using a lightly moistened cloth. Use only mild cleaning agents, never solvents or corrosive chemicals.

Responsible disposal

This symbol indicates that this product should not be disposed of with genera households waste. This applies throughout the entire EU. In order to prevent any harm to the environment or health hazards caused by incorrect waste disposal, the product must be handed in for recycling so that the material can be disposed of in a responsible manner. When recycling your product, take it to your local collection facility or contact the place of purchase. They will ensure that the product is disposed of in an environmentally sound manner.

Specifications

Power supply 220-240 V AC, 50 Hz

Power 25 (70) W

Mains lead 1.4 m

Protection class

Warm-up time 3-5 min

Glue sticks 0.1 mm

Weight 0.2 kg

Limpistol

Artnr 41-2581 Modell FL-159

Användning

Förberedelser

Bruk

Forberedelser

Liimaaminen