SSB349 - Projector Mount Chief - Free user manual and instructions

Product Type	Wall Mount
Brand	Chief
Model	SSB349
Color	Black
Material	Steel
Compatible Screen Size	32" - 65"
Weight Capacity	125 lbs (56.7 kg)
VESA Compatibility	200x200 to 600x400 mm
Mount Type	Fixed (Low Profile)
Distance from Wall	1.5 inches (3.81 cm)
Safety Certification	UL Listed
Installation	Professional installation recommended
Included Hardware	Yes (lag bolts, spacers, screws)
Warranty	10 years
Weight of Mount	6.5 lbs (2.95 kg)
Dimensions	27.5 x 16.5 x 1.5 inches
Wall Stud Compatibility	16" or 24" center
Leveling Adjustment	Yes (after installation)
Cable Management	Integrated cable cover

Frequently Asked Questions - SSB349 Chief

What is the maximum weight capacity of the SSB349 mount?

The SSB349 mount supports up to 125 lbs (56.7 kg), making it suitable for most flat-screen TVs within that weight range.

What VESA patterns are compatible with this mount?

It accepts VESA patterns from 200x200 mm to 600x400 mm, covering a wide range of TVs.

Does the mount tilt or swivel?

No, the SSB349 is a fixed low-profile mount. It keeps the TV close to the wall without tilting or swiveling.

What tools are needed for installation?

You will need a stud finder, drill, socket wrench, and level. All necessary hardware such as lag bolts and spacers are included.

Can I install this mount on drywall without studs?

No, the mount must be attached to wood or metal studs for safety. Drywall alone cannot support the weight.

Is professional installation required?

While not mandatory, professional installation is recommended to ensure proper mounting and safety.

How far will the TV sit from the wall?

The mount holds the TV just 1.5 inches (3.81 cm) from the wall for a sleek, low-profile look.

Does the mount include cable management?

Yes, it features an integrated cable cover to hide wires and maintain a clean appearance.

What is the warranty period?

Chief offers a 10-year warranty on the SSB349 mount, covering defects in materials and workmanship.

Can I use this mount with a curved TV?

Yes, as long as the TV's VESA pattern and weight are within the specified limits. The mount's flat plate can accommodate curved TVs if the mounting points are compatible.

USER MANUAL SSB349 Chief

INSTALLATION INSTRUCTIONS

SSB-349, SSM-349, SLB-349 and SLM-349 Interface Brackets

SSB-349, SSM-349, SLB-349 and SLM-349 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

(1) Interface Bracket (4) Screw, Phillips Flat Head, Machine, M4 x 16mm
(6) 10-24 Thumb Nuts ** (4) Screw, Flat Head Security, M4 x 16mm
(1) All-Points Security Kit (4) Spacer, .500 x .194 x .375
(1) 5/32" Security Hex Key

SLB-349
Note: SSB-style interface bracket connections are circled.

SLM-349
Note: SSM-style interface bracket connections are circled.

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
3. Place the interface bracket onto the bottom of the projector, aligning the mounting holes in the bracket with the threaded inserts in the bottom of the projector and ensuring that triangle in bracket points towards front of projector.
4. Position M4 x 16mm mounting screws with spacers into the threaded inserts. Place the M4 x 16mm screw into the threaded insert and mounting hole at center of interface bracket. Tighten all fasteners at this time, securing the bracket to the projector.

NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the All-Points Security Kit.

Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

CHIEF®

Our Mounts. Your Vision.

Chief, a products division of Milestone AV Technologies

6436 City West Parkway, Eden Prairie, MN 55344

• P: 800.582.6480 / 952.225.6000 • F:877.894.6918 / 952.894.6918

8800-002856 Rev00

©2016 Milestone AV Technologies

www.milestone.com

07/16