SLB336 - Projector Mount Chief - Free user manual and instructions

Product Type	Wall Mount for Flat Panel Displays
Brand	Chief
Model	SLB336
Compatibility	Most flat panel displays up to 65"
Weight Capacity	125 lbs (56.7 kg)
VESA Compatibility	100x100mm to 600x400mm
Material	Heavy-duty steel with powder coat finish
Color	Black
Dimensions (H x W x D)	25.4" x 18.5" x 2.8" (645 x 470 x 71 mm)
Product Weight	12.5 lbs (5.7 kg)
Tilt Range	+5° / -15°
Swivel Range	±90°
Level Adjustment	±4° after installation
Installation Type	Fixed to wall studs (single or dual)
Included Hardware	Mounting hardware, screws, washers, and cable management clips
Warranty	10 years limited
Certification	UL listed
Cleaning	Wipe with dry cloth; do not use abrasive cleaners
Safety Notes	Ensure mount is attached to load-bearing wall; do not exceed weight capacity
Manual Language	English (PDF download available)

Frequently Asked Questions - SLB336 Chief

What is the weight capacity of the Chief SLB336?

The weight capacity is 125 lbs (56.7 kg). Always ensure your display does not exceed this limit.

What VESA patterns does the SLB336 support?

It supports VESA patterns from 100x100mm to 600x400mm, covering most standard flat panel displays.

Is this mount compatible with a 55-inch TV?

Yes, as long as the TV's weight is under 125 lbs and its VESA pattern falls within 100x100mm to 600x400mm, the mount will fit.

Can I install the SLB336 on a concrete wall?

Yes, but you will need to use appropriate concrete anchors (not included) and ensure the wall can support the load.

What tools are needed for installation?

A stud finder, drill, socket wrench or screwdriver, and a level are typically required. Refer to the manual for exact specifications.

Does the mount include cable management?

Yes, cable management clips are included to organize and hide cables behind the display.

How do I level the display after installation?

The mount features ±4° level adjustment after installation. Loosen the leveling screws, adjust, then retighten.

Is the Chief SLB336 UL certified?

Yes, it is UL listed for safety and quality assurance.

What is the warranty period?

The mount comes with a 10-year limited warranty covering defects in materials and workmanship.

Can I download the manual in other languages?

The manual is currently available in English as a PDF download. For other languages, you can request a translation on the product page.

USER MANUAL SLB336 Chief

INSTALLATION INSTRUCTIONS

SSB-336, SSM-336, SLB-336 and SLM-336 Interface Brackets

SSB-336, SSM-336, SLB-336 and SLM-336 Interface Brackets are designed for use with Chief® Series Projector Mounts. See the specific installation instructions provided with the mount for additional installation information.

Unpack carton and verify kit contents. If any listed parts are missing, immediately contact a Chief Customer Service representative.

WARNING: IMPROPER INSTALLATION CAN LEAD TO EQUIPMENT FALLING CAUSING SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT substitute hardware. Use only hardware supplied by manufacturer!

(1) Interface Bracket (3) Screw, Phillips Pan Head, Machine, M6 x 12mm
(4) 10-24 Thumb Nuts ** (3) Washer, M6
(1) All-Points Security Kit (1) 5/32" Security Hex Key

SLB-336
Note: SSB-style interface bracket connections are circled.

SLM-336
Note: SSM-style interface bracket connections are circled.

**Only used when installing SLB/SSB interface brackets.

NOTE: Specific to SSB-style and SSM-style interface bracket installation: All appropriate screws come pre-installed in the circled locations above. DO NOT attempt to substitute and USE ONLY this pre-installed hardware for SSB-style and SSM-style interface bracket installation.

Installation Instructions

WARNING: OVER TIGHTENING OF SCREWS CAN DAMAGE PARTS AND CAN LEAD TO SERIOUS PERSONAL INJURY AND DAMAGE TO EQUIPMENT! DO NOT over tighten screws when installing interface brackets.

NOTE: Step 1 is only required when installing an SLB/SSB interface bracket. If an SLM/SSM bracket is being installed, proceed to step 2.

1. Screw thumb screws onto 10-24 x 5/8" Phillips pan head screws. DO NOT fully tighten thumb screws at this time.
2. Turn projector upside down on a flat surface.
3. Place the interface bracket onto the bottom of the projector, aligning the mounting holes in the bracket with the threaded inserts in the bottom of the projector and ensuring that triangle in bracket points towards front of projector.
4. Position M6 x 12mm mounting screws with M6 flat washers into the bracket attachment points and threaded inserts. Tighten all fasteners at this time, securing the bracket to the projector.

NOTE: Security screws can be substituted when mounting Interface bracket to projector by using the parts and installation instructions in the All-Points Security Kit.

Chief® is a registered trademark of Milestone AV Technologies. All rights reserved.

Milestone AV Technologies, and its affiliated corporations and subsidiaries (collectively, "Milestone"), intend to make this manual accurate and complete. However, Milestone makes no claim that the information contained herein covers all details, conditions or variations, nor does it provide for every possible contingency in connection with the installation or use of this product. The information contained in this document is subject to change without notice or obligation of any kind. Milestone makes no representation of warranty, expressed or implied, regarding the information contained herein. Milestone assumes no responsibility for accuracy, completeness or sufficiency of the information contained in this document.

CHIEF®

Our Mounts. Your Vision.

Chief, a products division of Milestone AV Technologies

6436 City West Parkway, Eden Prairie, MN 55344

• P: 800.582.6480 / 952.225.6000 • F:877.894.6918 / 952.894.6918

8800-002714 Rev00

©2015 Milestone AV Technologies

02/15