ST-FP0069 - Food processor Saturn - Free user manual and instructions
Find the device manual for free ST-FP0069 Saturn in PDF.
| Product Type | Food Processor |
| Brand | Saturn |
| Model | ST-FP0069 |
| Dimensions (W x D x H) | Approx. 25 x 20 x 35 cm |
| Weight | Approx. 3.5 kg |
| Power Supply | 220-240 V ~ 50/60 Hz |
| Power Consumption | 800 W |
| Bowl Capacity | 2.5 L |
| Main Functions | Chopping, Slicing, Shredding, Mixing, Dough Kneading |
| Speed Settings | 2 speeds plus pulse |
| Material (Bowl) | Stainless steel |
| Material (Blade) | Stainless steel |
| Safety Features | Safety lock lid, non-slip feet, overload protection |
| Accessories Included | Chopping blade, slicing disc, shredding disc, dough hook |
| Cleaning | Removable parts are dishwasher safe |
| Noise Level | < 85 dB |
| Cable Length | Approx. 1.2 m |
| Color | White / Silver |
| Guarantee | 2 years |
Frequently Asked Questions - ST-FP0069 Saturn
User questions about ST-FP0069 Saturn
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
Download the instructions for your Food processor in PDF format for free! Find your manual ST-FP0069 - Saturn and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ST-FP0069 by Saturn.
USER MANUAL ST-FP0069 Saturn

FOOD PROCESSOR
Dear Buyer!
We congratulate you on having bought the device under trade name "Saturn". We are sure that our devices will become faithful and reliable assistance in your housekeeping.
Avoid extreme temperature changes. Rapid temperature change (e.g. when the unit is moved from freezing temperature to a warm room) may cause condensation inside the unit and a malfunction when it is switched on. In this case leave the unit at room temperature for at least 1.5 hours before switching it
If the unit has been in transit, leave it indoors for at least 1.5 hours before starting operation.
Before using your machine
- Read these instructions carefully and retain for future reference.
Safety
The blades and discs are very sharp, handle with care. Always hold the knife blade by the finger grip and at the top, away from the cutting handling and cleaning

Do not lift or carry the processor by the handle - or the handle may break resulting in injury. Always remove the knife blade before pouring contents from the bowl. Keep hands and utensils out of the processor bowl and liquidiser jug whilst connected to the power supply. Switch off and unplug: - before fitting or removing parts; - after use;
- before cleaning
Never use your fingers to push food down the feed tube. Always use the pusher supplied.
Before removing the lid from the bowl or liquidiser/mill from the power unit: - Switch off.
- Wait until the attachment/blades have completely stopped.
- Be careful not to unscrew the liquidiser jug or mill from the blade unit.
Allow all liquids to cool to room temperature before placing them in the liquidiser.
This machine will be damaged and may cause injury if the interlock mechanism is subjected to excessive force.
Never use an unauthorised attachment. Never leave the machine on unattended. Never use a damaged machine, if break, please get it repaired at an authorized service center.
Never let the power unit, cord or plug get wet.
Don't let the wire hang over the edge of a table or worktop or touch hot surfaces.
Do not exceed the maximum capacities stated.
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. Not recommended for using by children under the age of 14.
Only use the appliance for its intended domestic use.
Before plugging the blender in, ensure that the technical characteristics of the power supply corresponds to the specifications of the device.
Service life - 2 years.
Before using for the first time
Wash the parts -see "Cleaning". Take care of the knife blades as they are very sharp.

Description
Processor
1 Power unit
2 Transmission
3 Chopping bowl
4 Lid
5 Feed tube
6 Chopper and juicer pushers
7. Safety interlock
8 Knob switch
Liquidiser
9 Mill/coffee grinder cover
10 Mill/coffee grinder cup
11 Lid cover
12 Blender lid
13 Blender bowl
14 Seal ring
15 Cup holder
Attachments
16 Chopping blade
17 Kneading
18 Slicing/ shredding disc
19 French potato disc
20 Potato mashing disc
21 Citrus juicer
22 Spatula
23 Whisk
Juicer
24 Juicer bowl fixator
25 Juicer bowl
26 Sieve
27 Juicer bowl cover
Choosing a speed for all functions
| Tool/At- tach- ment | Function | Speed Maxi- mum capac i-ties | K B ti- me | |
| Knife Blade | Grind meat Cut vegeta- bles Make stuffing: cut meat and vegeta- bles both (need to put meat first) | 2 1-2 2 | 500g meat 500g meat | 3 0 sec |
| Dough tool | Dough making | 2 500g | flour 280 ml water | 6 0 sec |
| Discs- Slc- 6 | ||||
| slic-ing/shred-ding/chip-ping | ing/shre-d-ding/chip-pingfood and vegeta-bles such as carrots, cheese | 1-2 0s | ec | |
| Mixing com-po-nents | make jam,milk shake,soup | 1-2 1200ml | 60sec | |
| Citrus press compo-po-nents | Citrus fruits juicing | 1 | 30sec | |
| Mill/co f-fee grind-er com-po-nents | for spi-ces,coffee beans etc.milling | 2 | 30sec | |
To use your food processor
1 Fit the detachable shaft (2) onto the power unit.
2 Then fit the bowl. Place the handle towards the back and turn clockwise until it locks (3).
3 Fit an attachment over the drive shaft.
● Always fit the bowl and attachment onto the machine before adding ingredients.
4 Fit the lid (C).
5 Switch on and select a speed.
- The processor won't work if the
bowl and lid are fitted incorrectly.
- Use the pulse (p) for short bursts. The pulse will operate for as long as the control is held in position.
6 Reverse the above procedure to remove the lid, attachments and bowl.
● Always switch off before removing the lid.
Important
- When adding almond essence or flavoring to mixtures avoid contact with the plastic as this may result
in permanent marking.
To use your liquidiser
1 Fit the sealing ring (14) into the blade unit (15) ensuring the seal is located correctly. Leaking will occur if the seal is damaged or not fitted correctly.
2 Screw the jug onto the blade unit.
3 Put your Ingredients into the jug.
4 Put the lid cover in the lid, then turn
5 Turn the lid in a clockwise direction to lock onto the jug.
6 Place the liquidiser onto the power
7 Select a speed or use the pulse control.
- Allow all liquids to cool to room temperature before placing them in the liquidiser.
Hints
- When making mayonnaise, put all the ingredients, except the oil, into the liquidiser. With the machine running, pour the oil into the bowl (taking the lid cover out of the blender lid) and let it run through.
- Thick mixtures, e.g. pates and dips, may need scraping down. If it's difficult to process, add more liquid.
- When crushing ice use the pulse in short bursts.
- To ensure the long life of your liquidser, never run it for longer than 30-60 seconds. Switch off as soon as you've got the right consistency

- The machine won't work if the liquidiser is fitted incorrectly.
- Don't put dry ingredients into the liquidiser before switching on. If necessary, cut them into pieces; remove the lid cover; then

with machine running, drop them through one by one.
- Don't use the liquidiser as a storage container. Keep it empty before and after use.
- Never blend more than 1.2 liters – less for frothy liquids like milkshakes.
Using the attachment
Knife blade 16 / dough tool 17
The knife blade is the most versatile of
all the attachments.
The length of the processing time will determine the texture achieved. For coarser texture use the pulse control.
Use the knife blade for cake and pastry making, chopping raw and cooked meat, vegetables, nuts, pate, dips, pureeing soups and to also make crumbs from biscuits and bread. It can also be used for yeasted dough mixes if the dough tool is not supplied.
Use the dough tool for yeasted mixes. Hints
Knife blade
- For more efficient food processing it is recommended to cut products into cubes of about 2cm.
● Biscuits should be broken into pieces and added down the feed tube whilst the machine is running.
- When making pastry use fat straight from the fridge cut into 2cm/3/4in cubes.
● Take care not to over-process. Dough tool
1 Place the dry ingredients in the bowl and add the liquid down the feed tube whilst the machine is running. Process until a smooth elastic ball of dough is formed this will take 30-60 sec.
2 Re-knead by hand only. Re - kneading in the bowl is not recommended as it may cause the processor to become unstable.
Slicing/ shredding/mashing discs 18/19/20

Slicing/ shredding disc, 18
- Use the shredding side for cheese, carrots, potatoes and foods of a similar texture.
- Use the slicing side for cheese, carrots, potatoes, cabbage cucumber, courgette, beetroot and onions.
French potato disc 19
Use to cut: French potatoes; firm ingredients for salads, garnishes, casseroles and stir fries(e.g. carrot, swede, courgette, cucumber).
Potato mashing disc 20 Use to mashing potato etc.
Safety
● Never remove the lid until the cutting disc has completely stopped.
- Handle the cutting discs with care – they are extremely sharp.
To use the cutting discs

1). Fit the drive shaft and bowl onto the power unit.
2). Holding by the centre grip (d), place the disc onto the drive shaft with the appropriate side uppermost (e). 3). Fit the lid.
4). Put the food in the feed tube. 5). Switch on and push down evenly with the pusher-never put your fingers in the feed tube.
- Use fresh ingredients
- Use fresh ingredients.
- Don't cut food too small
- When using the chipper disc, place ingredients horizontally.
- When slicing or shredding: food placed upright (f) comes out shorter than food placed horizontally (g).


Citrus press 21
Use the citrus press to squeeze the juice from citrus fruits (e.g. oranges, lemons, limes and grapefruits).
Cone ① Sieve ②

To use the citrus press
- Fit the drive shaft and bowl onto the power unit.
2.Fit the sieve into the bowl - ensuring the sieve handle is licked into position directly over the bowl handle (h). 3.Place the cone over the drive shaft turning until it drops all the way down (i).
- Cut the fruit in half. Then switch on and press the fruit onto the cone.
- The citrus press will not operate if the sieve is not locked correctly. Mill/coffee grinder ⑩
Use the mill/coffee grinder for milling hearbs, nuts and coffee beans.
① blade unit
② sealing ring ③ jar
④ sprinkler lid

Safety
● Never fit the blade unit to your machine without the jar fitted
- Don't touch the sharp blades. Keep the blade unit away from children.
● Never remove the mill until the blades have completely stopped.
Important
- To ensure long life of your mill/coffee grinder, never run for longer than 30-60 seconds. Switch off as soon as you've got the right consistency.
- The machine won't work if the mill/coffee grinder is fitted incorrectly.
- Use for dry ingredients only. To use your mill
1 Put your ingredients into the jar. Fill it no more than half full.
2 Fit the sealing ring into the blade unit.
3 Turn the blade unit upside down.
Lower it into the jar, blades down. 4 Screw the blade unit onto the jar until it is finger tight.
5 Place the mill onto the power unit and turn to lock (i).
6 Switch on to maximum speed or use the pulse control.
7 After milling, you can replace the blade unit with the sprinkler lid and shake out your food.

Hints
Herbs are best milled when clean and dry.
Juicer

Put the Bowl like this way, make sure the mark and the main body mark is on the same way. Then you can turn the bowl clockwise, after you heard a click, and the bowl is on the way as per the right photo, the machine is assembled correctly.
When finished the working, you can turn the bowl out by anti-clockwise turning. Never insert your hand or another object (e.g., a fork, knife, spoon or spatula) into the feeding tube. Only use the pusher supplied with the appliance for this purpose. Wait until the sieve has completely stopped rotating before you remove the lid.
- Always check the sieve before use. Do not use the juicer if you notice any damage like cracks, crazes or a loose grating disc.
- The standard processing time for all juicing jobs is 30-120 seconds.
- Peel citrus fruits, pineapples, melons, etc. before you juice them.
- Stone cherries, plums, apricots, peaches, etc. before you juice them.
To use your whisk
You can use the balloon beater to whip cream, to whisk eggs and egg whites and to make instant pudding, mayonnaise and sponge cake mixture. Do not use the balloon beater to prepare cake mixtures with butter or margarine or to knead dough. Use the kneading accessory for these jobs. Do not fill the bowl beyond the MAX indication.
- Make sure the bowl and the balloon beater are dry and free from grease when you whisk egg whites. The egg
whites have to be at room temperature. - Always clean the balloon beater after use.

Care and cleaning
1 Always switch off and unplug before cleaning.
2 Handle the blades and cutting discs with care – they are extremely sharp.
3 Some food may discolor the plastic. This is perfectly normal and won't harm the plastic or affect the flavor of your food. Rub with a cloth dipped in vegetable oil to remove the discoloration.
Power unit
Wipe with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.
Liquidiser/mill
1 Empty the jug/jar before unscrewing it from the blade unit.
2 Wash the jug/jar by hand.
3 Remove and wash the seals. 4 Don't touch the sharp blades, brush them clean using hot soapy water, then rinse thoroughly under the tap. Don't immerse the blade unit in water.
5 Leave to dry upside down.
All other parts
- Wash by hand, then dry. - Alternatively they can be washed on the top rack of your dishwasher. A short low temperature program is recommended.
Customer care
If the cord is damaged, it must be replaced by the manufacturer service agent in order to avoid a hazard.
Technical Data:
Power: 1000 W Rated Voltage: 220-240 V Rated Frequency: 50 Hz Rated Current: 5 A
Set
Chopper 1
Juicer 1
Blender 1
Citrus juicer 1 Mill/coffee grinder 1
Milly/coffee grinder 1 Whisk 1
Slicing/ shredding disc
French potato disc
Potato mashing disc
Spaticia 1 Instructio
Instruction Manual with Warranty Book
Package 1
ENVIRONMENT FRIENDLY DISPOSAL

You can help protect the environment! Please remember to respect the local regulations; hand in the non-working electrical equipments to an appropriate waste disposal center.
The manufacturer reserves the right to change the specification and design of goods.
RU
КУХОННЫЙ КОМБАЙН
Меры безопасности

Мал.1
Мал.2

The Warranty is provided for the period of 2 years or more if the Law on User Right of the country where the appliance was bought provides for a greater minimum warranty period.
All terms of warranty comply with to the Law on Protection of the Consumer Rights and are governed by the legislation of the country where the product was bought. The warranty and free of charge repair are provided in any country where the product is delivered to by Saturn Home Appliances or authorized representative thereof, and where no restriction of import or other legal provisions interfere with rendering of warranty services and free of charge repair.
Cases uncovered by the warranty and free of charge repair:
-
Guarantee coupon is filled in improperly.
-
The product has become inoperable because of the Buyer's nonobservance of the service regulations indicated in the instruction.
-
The product was used for professional, commercial or industrial purposes (except for the models, specially intended for this purpose that is indicated in the instruction).
-
The product has external mechanical damage or damage caused by penetration of the liquid inside, dust, insects and other foreign objects.
-
The product has damages caused by non-observance of the rules of power supply from batteries, mains or accumulators.
-
The product was exposed to opening, repair or modification of design by the persons, unauthorized to repair; independent cleaning of internal mechanisms etc. was made.
-
The product has natural wear of parts with limited service life, expendables etc.
-
The product has deposits of scale inside or outside of fire-bar elements, irrespective of used water quality.
-
The product has damages caused by effect of high (low) temperatures or fire on non-heat resistant parts of the product.
-
The product has damages of accessories and nozzles which are included into the complete set of product shipment (filters, grids, bags, flasks, cups, covers, knives, scaling rings, graters, disks, plates, tubes, hoses, brushes, and also power cords, headphone cords etc.).
On the warranty service and repair, please contact the authorized service centers of "Saturn Home Appliances".
CZ
MEZINÁRODNÍ ZÁRUKA
When purchasing the product, please require its checking before you;
BE SURE
that the goods sold to you, are functional and complete and that the warranty coupon is filled in correctly.
This warranty coupon confirms the absence of any defects in the product you purchased and provides for free of charge repair of the product failed through the fault of the manufacturer throughout the period of warranty service and free of charge repair.
Failing the presentation of this coupon, in case of its improper filling in, infringement of factory scans (if any), and also in cases indicated in the warranty obligations, the claims are not accepted, and no warranty service and free of charge repair is made! The warranty coupon is valid only in the original copy with the stamp of trading organization, signature of the seller, date of sale and signature of the buyer.

ZÁRUČNÍ LIST
Buyer's Signature confirming the acquaintance and consent with conditions of free of charge maintenance service of the product, and absence of the complaints on appearance and color of the product.