R3Z - Dishwasher REX - Free user manual and instructions

Product Type	Freestanding Dishwasher
Brand	Rex
Model	R3Z
Dimensions (H x W x D)	85 cm x 60 cm x 60 cm
Weight	Approx. 40 kg
Power Supply	220-240 V ~ 50 Hz, 10 A
Energy Class	A+ (typical for this class)
Water Consumption	Approx. 10 L per cycle
Noise Level	49 dB (A)
Number of Place Settings	12
Programs	Eco, Intensive, Normal, Quick, Glass, Pre-wash
Drying System	Condensation drying
Control Type	Electronic push buttons with LED display
Delay Start	Yes, up to 24 hours
Safety Features	Water leakage protection, child lock, overheating protection
Cleaning and Maintenance	Clean filters and spray arms regularly; descale when needed
Spare Parts Availability	Filters, spray arms, racks, heating element, circulation pump
Repairability	Designed for easy access; replacement parts widely available
Installation Type	Freestanding, can be integrated under worktop
Color	White (typical)

Frequently Asked Questions - R3Z REX

How do I start a wash cycle?

Load the dishes, add detergent, select a program using the program selector, then press the Start button. Close the door securely.

Why is my dishwasher not draining?

Check the drain hose for kinks or blockages, and clean the filter. Ensure the drain pump is not jammed. Refer to the manual for detailed instructions.

What detergent should I use?

You may use powder, gel, or all-in-one tablets. For best results, use a detergent with rinse aid and ensure the dispenser is filled.

How do I clean the filters?

Turn off the dishwasher and remove the lower rack. Twist and lift the filter assembly, rinse under running water, and scrub gently with a soft brush. Reinstall securely.

Why are dishes not drying properly?

Ensure the rinse aid reservoir is full and the setting is appropriate. Also check that the drying option is enabled on certain programs.

Can I use the dishwasher with half a load?

Yes, select the Half Load or Eco program to save water and energy. Load dishes in both racks evenly.

What does the error code E1 mean?

Error E1 typically indicates a water supply issue. Check that the water tap is open and the inlet hose is not kinked or blocked.

How do I install the dishwasher?

Place the dishwasher on a level floor, connect the inlet hose to a cold water supply (max 60°C), attach the drain hose to a sink drain, and plug into a grounded outlet.

Is it safe to put plastic items in the dishwasher?

Only place dishwasher-safe plastics on the top rack, away from the heating element. Check the item's label for dishwasher safe symbol.

How do I reset the dishwasher?

Press and hold the Start/Reset button for 3 seconds to cancel a cycle. To fully reset, unplug for 1 minute then plug back in.

USER MANUAL R3Z REX

Technical line drawing of a mechanical component with a circular housing and mounting bracket (no text or symbols)

Diagram of a mechanical device with a circular inset showing internal components (no text or symbols)

Technical line drawing of a rectangular industrial or storage unit with internal components and dimension labels (no readable text or symbols)

Technical diagram showing a mechanical assembly with a rotating component and wiring (no text or symbols)

Technical line drawing of two mechanical components with no visible text or symbols

Line drawing of a basket filled with various kitchen utensils, no text or symbols present

Technical line drawing of a mechanical component with layered oscillations and central shaft (no text or symbols)

Line drawing of a woven basket filled with leafy vegetables (no text or symbols)

Technical line drawing of a multi-tiered mechanical assembly with no visible text or symbols

Attenzione

Technical line drawing of a mechanical assembly with a cylindrical component mounted on a platform (no text or symbols visible)

Technical line drawing of a mechanical assembly with multiple components and no visible text or symbols

Uso del detersivo

Illustration of a hand holding a ball with an arrow indicating rotation (no text or symbols)

6) Date il via

Diagram of a hand using a tool to press or install a device inside a circular frame (no text or symbols)