Naxa

NAS-5004 - Pregnant Naxa - Free user manual and instructions

Find the device manual for free NAS-5004 Naxa in PDF.

📄 48 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Naxa NAS-5004 - page 2
View the manual : English EN Español ES
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Portable Bluetooth Speaker
Model NAS-5004
Brand Naxa
Dimensions Approx. 18 x 6 x 6 cm (7.1 x 2.4 x 2.4 inches)
Weight Approx. 500 g (1.1 lb)
Power Supply Built-in rechargeable battery, USB charging (5V)
Battery Life Up to 6 hours at moderate volume
Main Functions Bluetooth 5.0, FM radio, microSD card slot, AUX input
Bluetooth Range Up to 10 meters (33 feet)
Speaker Type Full-range driver with passive bass radiator
Output Power 10W RMS
Frequency Range 80 Hz - 20 kHz
Controls Power, volume, play/pause, track skip, mode button
Hands-free Calling Built-in microphone for speakerphone
Material Plastic with fabric grille
Water Resistance IPX4 (splash-proof)
What's in the Box Speaker, USB charging cable, AUX cable, user manual
Care and Cleaning Wipe with dry cloth; avoid liquids; no abrasive cleaners
Safety Do not expose to extreme temperatures; keep away from water; use only provided charger
Spare Parts and Repairability Contact Naxa support for battery replacement; no user-serviceable parts

Frequently Asked Questions - NAS-5004 Naxa

How do I pair the Naxa NAS-5004 with my phone?
Turn on the speaker by pressing and holding the power button. The speaker will enter pairing mode (indicated by flashing blue LED). On your phone, go to Bluetooth settings and select NAS-5004. Pair without a code.
How long does it take to charge the battery?
Charging via USB typically takes about 3 hours for a full charge. Use a standard 5V/1A adapter.
Can I use the speaker while it's charging?
Yes, you can use the speaker while charging, but it may take longer to charge fully.
How do I switch between Bluetooth, FM radio, and microSD modes?
Press the Mode button repeatedly to cycle through Bluetooth, FM radio, microSD, and AUX modes. The LED indicator changes color accordingly.
Why is the FM radio not working?
Ensure the AUX cable is not plugged in, as it can interfere with FM reception. Extend the AUX cable to act as an antenna. Also, try scanning for stations in an area with good signal.
How can I clean the speaker?
Wipe the exterior with a soft, dry cloth. Do not use water, alcohol, or abrasive cleaners. Keep the charging port dry.
What should I do if the speaker doesn't turn on?
First, charge the speaker for at least 30 minutes. Then press and hold the power button for 5 seconds. If still off, try a different USB cable and adapter.
Can I connect two speakers together?
The NAS-5004 does not support TWS (True Wireless Stereo) pairing. For stereo sound, use two speakers with separate audio sources.
Is the speaker waterproof?
It has an IPX4 rating, meaning it is splash-proof but not waterproof. Avoid submerging in water.
How do I reset the speaker?
To reset, turn off the speaker, then press and hold the Volume Up and Mode buttons simultaneously for 5 seconds until the LED flashes.

User questions about NAS-5004 Naxa

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Pregnant in PDF format for free! Find your manual NAS-5004 - Naxa and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. NAS-5004 by Naxa.

USER MANUAL NAS-5004 Naxa

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Naxa

Model : NAS-5004

Category : Pregnant