Fully Enclosed Dual Extruder 230 - 3D Printer MONOPRICE - Free user manual and instructions
Find the device manual for free Fully Enclosed Dual Extruder 230 MONOPRICE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Fully Enclosed Dual Extruder 3D Printer |
| Model | Fully Enclosed Dual Extruder 230 |
| Brand | Monoprice |
| Build Volume | 230 x 230 x 230 mm |
| Extruder Type | Dual extruder (independent) |
| Filament Compatibility | PLA, ABS, PETG, TPU, and more (1.75 mm) |
| Max Nozzle Temperature | 260°C (500°F) |
| Max Bed Temperature | 100°C (212°F) |
| Enclosure | Full enclosure with door and top cover |
| Connectivity | USB, SD card |
| Display | Full-color touchscreen |
| Printing Speed | Up to 150 mm/s (recommended 60-80 mm/s) |
| Layer Resolution | 0.1 - 0.4 mm |
| Dimensions | 505 x 430 x 505 mm (19.9 x 16.9 x 19.9 in) |
| Weight | 18 kg (39.7 lbs) |
| Power Supply | AC 100-240V, 50/60Hz, 350W |
| Main Functions | Independent dual extrusion, auto bed leveling (inductive sensor), resume print on power loss, filament runout sensor, quiet stepper motors |
| Maintenance | Clean nozzle with included tools; lubricate linear rods periodically; tighten belts as needed; update firmware via USB |
| Safety Features | Enclosure with filtered exhaust, thermal runaway protection, over-current protection, emergency stop button |
| Spare Parts & Repairability | Replacement nozzles, hotends, build plates, fans, belts, and control boards available from Monoprice or third-party vendors |
| General Information | User manual in PDF (67 pages); warranty 1 year; support via Monoprice website; compatible with slicers like Cura, Simplify3D |
Frequently Asked Questions - Fully Enclosed Dual Extruder 230 MONOPRICE
What materials can the Monoprice Fully Enclosed Dual Extruder 230 print?
It can print a wide range of 1.75 mm filaments including PLA, ABS, PETG, TPU, and more. The dual extruders allow multi-material or multi-color prints.
How do I level the bed on this printer?
The printer features an auto bed leveling sensor. Use the 'Bed Leveling' option in the touchscreen menu. The printer will probe multiple points and compensate for any unevenness.
Can I print with two different colors simultaneously?
Yes, the dual extruders can print with two different filaments. You can assign different colors or materials to each extruder in your slicer software.
What software do I need to use?
The printer is compatible with standard slicing software such as Cura and Simplify3D. A profile for Monoprice printers is often pre-installed.
How do I change the filament?
Heat the nozzle to the filament's melting temperature, then use the 'Load' or 'Unload' option via the touchscreen. Cut the filament near the extruder and push the new filament until it extrudes cleanly.
What is the maximum print speed?
The printer can reach speeds up to 150 mm/s, but for best quality, we recommend 60-80 mm/s.
Does the printer support resume on power loss?
Yes, it has a power loss recovery feature. When power is restored, the printer will resume the print from where it stopped.
How do I clean the nozzle?
Heat the nozzle to 200-230°C, then use the provided cleaning needle to gently clear any clogs. You can also perform a 'cold pull' by inserting nylon filament and pulling it out after cooling.
Is the enclosure ventilated?
The enclosure has a filtered exhaust system to reduce fumes when printing with materials like ABS. Ensure the printer is in a well-ventilated area.
Where can I find spare parts?
Spare parts such as nozzles, hotends, build plates, and belts are available on the Monoprice website or from online retailers. The printer is designed for easy replacement.
User questions about Fully Enclosed Dual Extruder 230 MONOPRICE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your 3D Printer in PDF format for free! Find your manual Fully Enclosed Dual Extruder 230 - MONOPRICE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Fully Enclosed Dual Extruder 230 by MONOPRICE.
