TWSQ 310 CI - Electronic module Fte maximal - Free user manual and instructions
Find the device manual for free TWSQ 310 CI Fte maximal in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electronic Module |
| Brand | Fte maximal |
| Model | TWSQ 310 CI |
| Dimensions | 100 x 60 x 30 mm |
| Weight | 150 g |
| Power Supply | 5V DC |
| Current Consumption | 500 mA |
| Operating Temperature | -20°C to +60°C |
| Storage Temperature | -40°C to +85°C |
| Protection Class | IP20 |
| Housing Material | Plastic, UL94 V-0 |
| Mounting | DIN rail (35 mm) |
| Connectivity | Screw terminals, 2.5 mm² |
| Indicators | Power LED, status LED |
| Main Functions | Signal processing, control interface, relay output |
| Input Signal | 0-10V, 4-20mA (configurable) |
| Output | Relay, 230V/5A |
| Maintenance | Keep clean and dry; no user-serviceable parts |
| Safety | Use only as intended; avoid short circuits |
| Spare Parts | Contact manufacturer for replacement |
| Repairability | Not user-serviceable; consult qualified personnel |
| Certifications | CE, RoHS |
| Compatibility | Standard industrial control systems |
Frequently Asked Questions - TWSQ 310 CI Fte maximal
What is the power supply requirement for the TWSQ 310 CI?
The module requires a stable 5V DC power supply with a minimum current capacity of 500 mA. Use a regulated power supply to avoid damage.
How do I mount the module on a DIN rail?
Align the module's rear groove with the 35 mm DIN rail and press until it clicks into place. To remove, pull down the locking tab and lift the module off.
What input signals can the module accept?
The module accepts analog signals of 0-10V or 4-20mA, configurable via internal jumpers. Check the manual for exact settings.
Does the module have any status indicators?
Yes, it has a green power LED and a yellow status LED. The status LED indicates relay state or fault conditions.
Can the module be used outdoors?
No, the protection class is IP20, meaning it is suitable for indoor, dry environments only. Keep away from moisture and dust.
What is the maximum load for the relay output?
The relay output can switch up to 230V AC / 5A (resistive). For inductive loads, use a snubber circuit.
How do I troubleshoot if the module does not power on?
First check the power supply voltage (5V DC) and polarity. Ensure the green LED is lit. If not, verify connections or replace the power supply.
Is the module repairable by the user?
No, the module contains no user-serviceable parts. Do not open the housing. Contact Fte maximal or an authorized technician for repairs.
What are the operating temperature limits?
The module operates reliably between -20°C and +60°C. Storage range is -40°C to +85°C. Avoid extreme temperatures.
Where can I find the latest manual or spare parts?
The manual is available for free download on notice-facile.com. For spare parts, contact Fte maximal customer support.
User questions about TWSQ 310 CI Fte maximal
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Electronic module in PDF format for free! Find your manual TWSQ 310 CI - Fte maximal and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TWSQ 310 CI by Fte maximal.