HDT2-1512 - Receiver HARPER - Free user manual and instructions
Find the device manual for free HDT2-1512 HARPER in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Stereo Receiver |
| Brand | Harper |
| Model | HDT2-1512 |
| Dimensions (W x H x D) | 430 x 140 x 320 mm |
| Weight | 8.5 kg |
| Power Supply | 230V AC, 50 Hz |
| Power Consumption | 200 W max |
| Output Power | 100 W per channel (4 ohms) |
| Frequency Response | 20 Hz - 20 kHz |
| Inputs | 3x RCA, 1x Phono, 1x AUX, 1x Optical, 1x Coaxial |
| Outputs | Speaker A/B, Subwoofer, Headphone |
| Radio Tuner | FM/AM with 30 presets |
| Remote Control | Included (batteries not included) |
| Display | LED backlit LCD |
| Functions | Volume, Bass, Treble, Balance, Loudness, Mute, Source selection, Tone control |
| Protection | Short circuit, overheat, overload protection |
| Maintenance | Wipe with dry cloth; avoid liquids |
| Safety | Do not open; risk of electric shock |
| Spare Parts | Contact after-sales service for replacement parts |
| Reparability | Only qualified personnel should repair |
Frequently Asked Questions - HDT2-1512 HARPER
How do I connect my speakers to the HDT2-1512?
Use banana plugs or bare wires. Connect to the Speaker A or Speaker B terminals on the back panel. Ensure polarity (+/-) matches.
Can I connect a turntable to this receiver?
Yes, use the Phono input. The receiver has a built-in phono preamp for moving magnet (MM) cartridges.
How do I set the radio stations?
Press the Tuner button, then use Scan to auto-search. Press and hold a preset number (1-30) to store a station.
What is the maximum power output?
It delivers 100W per channel into 4 ohms, or 70W per channel into 8 ohms, both channels driven.
Why is there no sound from the speakers?
Check that Speaker A or B is selected on the front panel. Also ensure the source is correctly chosen and volume is not at minimum.
How do I adjust the bass and treble?
Use the Bass and Treble knobs on the front panel. Turn clockwise to increase, counterclockwise to decrease.
Can I use this receiver with a subwoofer?
Yes, connect a powered subwoofer to the Subwoofer output on the back. The receiver sends a low-frequency signal.
The remote control does not work. What should I do?
First, replace the batteries (2x AAA). Point the remote directly at the receiver's IR sensor. Ensure no obstacles between them.
What is the recommended impedance for speakers?
Use speakers with an impedance of 4 to 16 ohms. Avoid using speakers lower than 4 ohms to prevent damage.
How do I clean the receiver?
Unplug the unit. Wipe the exterior with a soft, dry cloth. Do not use any liquids or cleaning agents.
User questions about HDT2-1512 HARPER
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Receiver in PDF format for free! Find your manual HDT2-1512 - HARPER and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. HDT2-1512 by HARPER.
