Galaxy CVC-H6220 - Vacuum Cleaner Heinner - Free user manual and instructions

Product Type	Cylinder Vacuum Cleaner
Brand	Heinner
Model	Galaxy CVC-H6220
Color	Black/Red
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	2000 W
Suction Power	Adjustable, max 400 AW
Dust Capacity	3.0 L (bagless)
Filtration System	HEPA 13 + washable pre-filter
Cord Length	5.0 m
Operating Radius	8.0 m (cable + hose)
Noise Level	78 dB(A)
Weight	2.5 kg
Dimensions (L x W x H)	400 x 250 x 300 mm
Hose Length	1.8 m
Accessories Included	Floor nozzle, crevice tool, brush tool, upholstery tool
Maintenance	Empty dust bin after use; wash filter every 3 months; replace HEPA filter yearly
Safety Features	Overheat protection, auto shut-off when bin full (indicator)
Repairability	Replacement parts available: filters, hose, nozzles

Frequently Asked Questions - Galaxy CVC-H6220 Heinner

How do I clean the HEPA filter?

Turn off and unplug the vacuum. Open the dust bin compartment and remove the HEPA filter. Tap it gently or use a soft brush to remove dust. Do not wash the HEPA filter unless specified; for this model it is washable but allow 24h to dry completely before reinserting.

What should I do if the suction power decreases?

First, check if the dust bin is full and empty it. Then inspect the HEPA filter and pre-filter for clogs; wash or replace if necessary. Also check the hose and nozzle for blockages. A full bin or dirty filter is the most common cause of loss of suction.

Can I use the vacuum without the HEPA filter?

No, never operate the vacuum without the HEPA filter in place. It protects the motor from dust and ensures clean exhaust air. Using without a filter can damage the motor and void the warranty.

How often should I replace the HEPA filter?

The HEPA filter should be replaced approximately every 12 months or sooner if it appears damaged or cannot be cleaned effectively. Regular cleaning extends its life.

The vacuum shuts off automatically during use. Why?

This vacuum has overheat protection. If the motor gets too hot (e.g., due to a clogged filter or full dust bin), it will shut off to prevent damage. Turn off, unplug, and let it cool for at least 30 minutes. Ensure the dust bin is empty and filters are clean before restarting.

What accessories are included with the Galaxy CVC-H6220?

The package includes a floor nozzle for carpets and hard floors, a crevice tool for tight spaces, a brush tool for furniture, and an upholstery tool for curtains and fabric.

How do I clean the washable pre-filter?

Remove the pre-filter from the dust bin. Rinse it under lukewarm running water until the water runs clear. Squeeze out excess water gently (do not twist). Let it air dry completely (approx. 24 hours) before reinstalling. Do not use any detergent.

Is the vacuum bagless? How do I empty the dust bin?

Yes, it is bagless. To empty, press the release button to detach the dust bin from the canister. Hold it over a trash bin and press the bottom flap release. Tap gently to release all dust. Close the flap and reattach the bin. For hygiene, empty it after each use.

The power cord does not rewind fully. What can I do?

Ensure the cord is not twisted or tangled. Pull out the entire cord and rewind it slowly, guiding it evenly. If the retraction mechanism still fails, there may be a blockage or spring issue; contact Heinner service center for repair.

Where can I find spare parts like filters or nozzles?

Spare parts can be purchased from Heinner authorized dealers or online. Visit the Heinner website and search for Galaxy CVC-H6220 accessories. Always use genuine parts to maintain performance and safety.

USER MANUAL Galaxy CVC-H6220 Heinner

Red and black vacuum cleaner with coiled hose, no visible text or symbols

• Aspirator cu ltrare ciclonica
• 2200W, 220-240V, 50 Hz
- Culoare: rosu

Close-up of a hand operating a vacuum cleaner on a tiled floor (no visible text or symbols)

Close-up of a hand holding a medical or laboratory tool, labeled 'Fig. 2' in the corner (no other text or symbols visible)

VI. FOLOSIREA APARATULUI

Aspirare:

Close-up of a hand pressing down on a black appliance component (no visible text or symbols)

Close-up of a hand placing a coin into a container with a label 'Fig. 4' (no other text or symbols visible)

Ajustarea puterii de aspirare:

Close-up of a hand holding a black cylindrical object, labeled 'Fig. 5' in the corner (no other text or symbols visible)

Close-up of a hand pressing down on a mechanical component with a dial indicator (no visible text or symbols)

Close-up of a mechanical component with a transparent cylindrical body and a metallic top (no visible text or symbols)

Hand placing a curved object into a circular container (no text or symbols visible)

Black-and-white photo of a small robotic vacuum cleaner with a handle and spool, labeled 'FIG. 9' in the corner (no other text or symbols visible)

Hand pouring liquid into a container on a rotating platform (no visible text or symbols)

Close-up of a hand holding a mechanical device with a circular component, labeled 'FIG. 11' (no readable text or symbols on the device itself)

Close-up of a robotic arm joint with a hand adjusting the shaft (no visible text or symbols)

Close-up of hands holding a coiled cable or wire component, labeled 'Fig. 13' (no other text or symbols visible)

Close-up of a hand holding a small black object with a textured base, next to a mechanical component (no visible text or symbols)

Close-up of hands using a computer to adjust a component on a table, no visible text or symbols

Curatare:

Black-and-white photo of a vacuum cleaner on tiled floor, no visible text or symbols

VII. IDENTIFICARE/ REZOLVARE PROBLEME

Copyright © 2013 Network One Disbuon. All rights reserved.

hp://www.heinner.com, hp://www.nod.ro

Europolis Logisc Park, Italia Street, 1-7, Chaijna, Ilfov, Romania

Tel: [phone], www.heinner.ro, www.nod.ro

HEINNER

VACUUM CLEANER GALAXY

Code: CVC-H6220

Red and black vacuum cleaner with coiled black hose, no visible text or symbols

• Vacuum cleaner with bag, 2200W
- 220-240V, 50 Hz
- Color: Red

Thank you for choosing this product!

I. INTRODUCTION

Please read this instrucon manual carefully before using it and kee it for later informaon

This manual is conceived for offering you all of the necessary info regarding instalaon, using and maintenance of the machine. For a correctly and safely use of the machine, please, read this manual before instalaon and using.

II. PACKAGE CONTENTS

Vacuum cleaner
Instrucon Manual
Warranty card
2 in 1 accessory: oor/ carpet brush
▶ Tight spaces accessory

III. GENERAL DESCRIPTION

1. Power cord
2. Cord rewinder release buon
3. On/O switch buon
   4.Carry handle
4. Lower house
   6.Dust container
5. Dust container liing handle
   8.Hose insert socket
   9.Flexible Hose
   10.Integrated brush and nozzle
   11.Floor brush
   12.Tube
6. Hard oors/carpet selector
7. Hand grip
8. Sucon power slider

IV. SAFETY REGULATIONS

1. Please read this instrucon manual carefully before using it and kee it for later informaon;
2. Check if the voltage indicated on the appliance corresponds to the local mains voltage before you connect the appliance;
3. To protect against electrical shock, do not immerse cord or plug into water or other liquid;
4. Do not use the appliance if the plug, the cord or the appliance itself is damaged;
5. If the mains cord of this appliance is damaged, it must be replaced by the producer or by the authorized service;
6. Keep the appliance out of the reach of children;
7. Never vacuum water or any other liquid, never vacuum ammable substances and do not vacuum ashes unl they are cold;
8. Do not point the hose, the tube or any other accessory at the eyes or ears nor put it in your mouth when it is connected to the vacuum cleaner and vacuum cleaner is switched on;
9. When you use the appliance to vacuum ashes, ne sand, lime cement dust and similar substance, the pores of the paper dust bag become clogged, as a result, the dust bag full indicator will indicate that the dust bag is full: replace the dust bag, even if it is not full yet;
10. Never use the appliance without the motor protecon Iter. This damages the motor and shortens the life of the appliance;
11. Never use this appliance without a dust bag
12. If faulty, please return this unit to authorized service, the repair must be done by authorized people only;
13. Never allow a child to operate this appliance. Children are vulnerable in the kitchen particularly when unsupervised and if appliances are being used or cooking is being carried out. Teach children to be aware of dangers in the kitchen, warm them of the dangers of reaching up to areas where they cannot see properly or should not be reaching;
14. Do not let the power cord to get in contact with hot surfaces;
15. Unplug the vacuum cleaner when you are not using it or when you are cleaning it;

V. PREPARING FOR USE

Hose:

• To connect the hose, push it into the appliance and turn it to click.
• To disconnect the hose, press the hook on the 2 side of hose heard, then pull it out of the appliance. See Fig.1.

Telescopic tube:

• Press the spring loaded lock buon on the telescopic tube part and slide the lock buon into the opening of the other tube part.
• Connect the telescopic tube part to the handgrip of the hose, then insert the narrow secon into the wider secon and turn a lile.
• Adjust the telescopic tube to the length that you nd most comfortable during vacuumming. See Fig.2.

Close-up of a hand operating a vacuum cleaner on a tiled floor (no visible text or symbols)

Close-up of a hand holding a syringe with a pointed tip, labeled 'Fig. 2' (no other text or symbols visible)

➢ Floor brush:

• You can use the oor brush on the carpet or on the hard oors.
• To clean hard oors, push the rocker switch on top of the oor brush with your foot, in order to make the brush strips come out of the brush housing.
• To clean the carpet, push the rocker switch on the other side to make the brush strips pop back in the housing;

Integrate brush & nozzle:

- Your vacuum cleaner comes with one of this accessories. Connect the integrate brush and nozzle directly to the handgrip or to the tube:

1. Use the crevice nozzle to vacuum the small area or clean narrow corners or hard-to-reach places;
2. Use the brush nozzle to clean computers, bookshelves etc.

VI. USING THE APPLIANCES

▶ Vacuum cleaning:

• You can carry the vacuum cleaner by the handle placed on the top front of the appliance. See Fig.3;
• Pull the cord out of the appliance and insert the mains plug into the wall socket;
• Press the On/O buon on top of the appliance. See Fig.4.

Close-up of a hand pressing down on a black appliance component (no visible text or symbols)

Close-up of a hand placing a small circular object onto a dark, curved surface (no text or symbols visible)

Adjusng sucon power:

• Using the sucon power slider on the handgrip of the hose. See Fig.5
- Using the sucon power control placed on the vacuum cleaner (Specic types only). See Fig.6

Close-up of a hand holding a black rubber or plastic device, labeled 'Fig. 5' in the corner (no other text or symbols visible)

Close-up of a hand pressing down on a mechanical component with circular components (no visible text or symbols)

Emptying the dust container:

You must empty the dust container at least when the swept quantity of dirt in the dust container has reached the MAX mark or sucon power has dropped. See Fig.7

1. Release the dust container by liing up Dust container handle from the top of dust container. See Fig.8
2. Li the dust container out of the vacuum cleaner. See Fig.9
3. To the dust container, hold it lower over a dust bin. See Fig.10
4. Push the open buon: the bases opens and the dust runs into the dust bin. See Fig.11
5. Close the base and place the dust container back in the vacuum cleaner. Press the dust container rmly into its bracket unl it audibly clicks into place. Then check the dust container to be securely seated.

Close-up of a transparent cylindrical device with a metallic rim, labeled 'Fig. 7' (no readable text or symbols on the device itself)

Hand placing a circular object into a curved container (no text or symbols visible)

Black-and-white photo of a small robotic vacuum cleaner with a lid and handle, labeled 'Fig. 9' in the corner (no other text or symbols visible)

Hand pouring liquid into a container on a rotating platform (no visible text or symbols)

Close-up of a hand holding a metallic cylindrical device with a black base, no visible text or symbols

▶ Cleaning the Iter and replacement:

• The vacuum cleaner has the following Iters: HEPA Iter; mesh protect cover and post motor Iters.
• The Iters can become blocked aer some me of using and can thereby reduce the sucon power. It is therefore important that the above menoned Iters are replaced from me to me

- Cleaning or Replacing the HEPA Iter:

Always unplug the appliance before you replace the lter. Li out the dust container from vacuum cleaner.

1. Open the dust container base. Clockwise twister the HEPA hold, depart the HEPA frame from dust container. See Fig.12;
2. Hold the mesh protect cover and turn clockwise, release the mesh protect cover. See Fig.13
3. If the HEPA liter is very dirty, rinse it thoroughly with a shower head and use a brush to clean the dirt on HEPA liter;
4. Then leave the liter to dry (approximave 15 hours at room temperature). You can only use it again when it is completely dry. If the dirt cannot be removed, insert a new HEPA liter;
5. Place the HEPA Filter and mesh protect cover back to dust up cover;
   Place the dust container on the vacuum cleaner. Press the dust container rmly into its bracket unl it audibly clicks into place. Then check if the dust container is securely seated.

Close-up of a mechanical component with a hand interacting with it, labeled 'Fig. 12' (no readable text or symbols on the object itself)

Close-up of hands holding a coiled cable or wire component, no visible text or symbols

- Cleaning or Replacing the post motor iter:

Always unplug the appliance before you replace the Iter.

1. Apart the exhaust grill by hold the lock handle and remove it from vacuum cleaner.

See Fig.14

1. Remove the iter and insert a new iter into the frame. See Fig.15
2. Place the exhaust grill into vacuum cleaner.

Note: The post motor protecng Iter is not washalbe. If it is only slightly dirty, it is sucient to knock the Iter over a dust bin. However, we recommend you to replace the Iter regularly

Close-up of a hand holding a black textured object, possibly a device or tool, with no visible text or symbols.

Close-up of hands using a handheld device to clean or store floor tiles (no visible text or symbols)

Cleaning:

• Always switch off and unplug the appliance before you clean any parts.
• Do not clean any part of the vacuum cleaner in the dishwasher. If necessary, clean the parts with a moist cloth.

Storage:

• Switch o the appliance and remove the mains plug from the wall socket.
• Press the cord rewind buon to rewind the cord.

You can storage the appliance in vercal parking posion. See Fig16.

Black-and-white photo of a vacuum cleaner on tiled floor, no visible text or symbols

VII. TROUBLESHOOTING

The sucon power is insucient:

• Perhaps the HEPA liter or per motor protecting liter is too dirty and blocked. If necessary, clean or replace the HEPA liter or per motor protecng liter.
• Perhaps the sucon power slide on the handgrip is open. Close the slide.
• Perhaps the electronic sucon power control (specific types only) has been set to a low seng. Set the control to a higher seng.
• Perhaps the oor brush, nozzle tube or hose is blocked up. To remove the obstrucon, disconnect the block up item and try to clean it.

Characteristic (Model):	CVC-H6220
Power:	2200W
Sucon power:	380W
Noise level:	<80dB
Input:	230V
Power cord length:	5m
Dust bag capacity:	2.0 L

Environment friendly disposal

You can help protect the environment!

Please remember to respect the local regulaons: hand in the non-working electrical equipment's to

HEINNER is a registered trademark of Network One Distribuon SRL. Other brands and product names are trademarks or registered trademarks of their respective holders.

No part of the speciaons may be reproduced in any form or by any means or used to make any derivative such as translaon, transformaon, or adaptaon without permission from NETWORK ONE DISTRIBUTION.

This product is in conformity with norms and standards of European Community

Importer: Network One Distribuon

Europolis Logisc Park, Italia Street, 1-7, Chaijna, Ilfov, Romania

Tel: [phone], www.heinner.com, www.nod.ro