BRST90X - Range hood BLANCO - Free user manual and instructions
Find the device manual for free BRST90X BLANCO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Model | BRST90X |
| Brand | BLANCO |
| Mounting Type | Built-in / Chimney |
| Width | 90 cm |
| Depth | 50 cm |
| Height (min - max) | 70 - 120 cm |
| Weight | 19 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Maximum Power Consumption | 250 W |
| Motor Power | 200 W |
| Number of Fan Speeds | 3 |
| Max Extraction Rate | 600 m³/h |
| Noise Level (max) | 65 dB(A) |
| Lighting | 2 x 40 W halogen lamps (or LED equivalent) |
| Grease Filter Type | Aluminum mesh, washable |
| Carbon Filter (optional) | Yes, for recirculation mode |
| Duct Diameter | 150 mm |
| Controls | Push buttons with LED indicators |
| Venting Mode | Ducted or recirculating |
| Energy Efficiency Class | A+ (typical) |
| Compliance | CE, ROHS |
| Spare Parts Available | Filters, lamps, motor, control board |
| Warranty | 2 years (standard) |
Frequently Asked Questions - BRST90X BLANCO
How do I install the BLANCO BRST90X range hood?
Installation must be done by a qualified technician. Ensure the hood is at least 65 cm above gas hobs and 55 cm above electric hobs. Follow the mounting instructions and ducting requirements in the manual.
How often should I clean the grease filters?
Grease filters should be cleaned every 2–3 months, or more frequently with heavy use. Remove the aluminum mesh filters and wash them with warm soapy water or in the dishwasher.
Can I use the hood in recirculation mode?
Yes, the BRST90X can be used in recirculation mode with an optional carbon filter. The charcoal filter absorbs odors and should be replaced every 3–6 months.
How do I replace the lamps?
Disconnect power first. The hood uses 40 W halogen bulbs (often G4 base). Remove the lamp cover, unscrew the old bulb, and insert a new one. Ensure the lamp type matches the specifications in the manual.
What is the maximum noise level?
The maximum noise level is approximately 65 dB(A) at the highest fan speed, which is comparable to a normal conversation. Lower speeds are quieter.
Why is my hood not extracting properly?
Check if the grease filters are clogged, if the duct is blocked or too long, or if the carbon filter needs replacement. Also ensure that the hood is installed at the correct height and that the fan speed is set appropriately.
What is the warranty on the BRST90X?
BLANCO offers a standard 2-year warranty for manufacturing defects. Register your product online to activate the warranty. Keep the purchase receipt as proof.
Can I control the hood with a remote or smart device?
The BRST90X uses manual push buttons. No remote control or smart connectivity is available on this model.
How do I clean the exterior?
Use a soft cloth with mild detergent and water. Avoid abrasive cleaners that may scratch the stainless steel surface. Dry with a clean cloth to prevent water spots.
Where can I buy spare parts like filters or lamps?
Spare parts are available from authorized BLANCO dealers, online stores, or directly from BLANCO customer service. Use the exact model number (BRST90X) for ordering.
User questions about BRST90X BLANCO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual BRST90X - BLANCO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BRST90X by BLANCO.