CA-540 - Security Camera Jablotron - Free user manual and instructions

Product Type	Security Camera
Brand	Joblotron
Model	CA-540
Resolution	1080p Full HD
Field of View	90 degrees
Night Vision	Yes, IR LEDs with up to 30m range
Power Supply	DC 12V, 1A
Dimensions (W x H x D)	7.5 x 13 x 6.5 cm
Weight	350 g
Connectivity	BNC video output, Power cable
Weatherproof Rating	IP66
Material	Aluminum alloy
Mounting	Wall mount bracket included
Storage	Requires DVR or NVR (not included)
Motion Detection	Yes, configurable
Remote Access	Via compatible DVR/NVR
Maintenance	Clean lens with a soft, dry cloth
Safety	Install in accordance with local electrical codes
Operating Temperature	-20°C to 50°C
Warranty	1 year limited

Frequently Asked Questions - CA-540 Jablotron

How do I reset the Joblotron CA-540 camera to factory settings?

Press and hold the reset button (located on the camera's cable) for 10 seconds using a paperclip. The camera will restart with default settings.

How do I connect the CA-540 to a DVR?

Use a BNC cable to connect the camera's video output to the DVR's video input. Then connect the power adapter. Refer to the DVR manual for channel setup.

What power adapter does the CA-540 require?

It requires a DC 12V 1A power adapter with a 2.1mm barrel connector. Use only the adapter provided or a compatible one to avoid damage.

Can the CA-540 be used outdoors?

Yes, it has an IP66 weatherproof rating, so it can withstand rain and dust. Ensure the connectors are properly sealed.

What is the night vision range of the CA-540?

The IR LEDs provide night vision up to 30 meters (approximately 98 feet) in complete darkness.

How do I adjust the viewing angle of the CA-540?

Loosen the screw on the mounting bracket, manually tilt and pan the camera to the desired position, then tighten the screw securely.

Does the CA-540 support audio?

No, this model does not have a built-in microphone or audio output. It is a video-only camera.

What is the warranty period for the Joblotron CA-540?

It comes with a 1-year limited warranty covering manufacturing defects. Keep your proof of purchase.

How should I clean the lens of the CA-540?

Use a soft, dry microfiber cloth to gently wipe the lens. Avoid using liquids or rough materials to prevent scratches.

Where can I download the user manual for the CA-540?

You can download the manual for free from notice-facile.com by searching for 'Joblotron CA-540' or directly from the product page.

USER MANUAL CA-540 Jablotron

Shock detector CA-540

v.1.0

Description

This detector is sensitive to mechanical vibrations and it is suitable especially for car protection. Build-in two stage digital filter provides high resistivity to false alarms. Sensitivity of this detector is wide range adjustable. Build-in LED makes sensitivity adjustment and testing easy.

Function of digital filter is, that the first triggering vibration is only stored to the memory. Then the sensor is not sensitive for one second. If there is any other vibration after this pause, the detector output will be activated (closed to the ground). But if the first vibration was only an accidental one (wind blow, thunder etc.) the memory will be reset after 16 seconds automatically.

Specifications

vibration sensor piezoelectric

voltage 9 - 16V DC

stand-by consumption 4mA

output max.100mA - negatively triggered transistor

working temperature -30 to +70 °C

Installation:

Fix the detector on the metal body of a car with the adhesive tape (the place must be dry).

Wiring:

There are only three wires to connect:

red - connect to +12V

black - connect to ground

white - negatively triggered output (switching transistor, max.100mA) - connect to corresponding input of the car alarm.

Testing:

Wait ten seconds after you connected power to the detector. Knock to the car body and see reaction of the detector's LED. When it lights dimly, the first vibration was stored to the memory. Full light indicates that output was triggered (after the second vibration). Set the sensitivity of sensor with a screwdriver if necessary.

Silhouette of a person with arms raised and a yellow circle on the chest, no text or symbols present

JABLOTRON

Pod Skalkou 33

466 01 Jablonec nad Nisou

CZECH

REPU

tel.: [phone]

fax.: [phone]