Temporis 200 IP - Phone ALCATEL - Free user manual and instructions
Find the device manual for free Temporis 200 IP ALCATEL in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Phone |
| Brand | Alcatel |
| Model | Temporis 200 IP |
| Dimensions (W x H x D) | 200 x 180 x 80 mm |
| Weight | 0.8 kg |
| Power Supply | Power over Ethernet (PoE) or AC adapter (48V) |
| Display | Monochrome LCD with backlight |
| Number of Lines | 2 SIP lines |
| Key Features | Speakerphone, call hold, transfer, conference, redial, mute |
| Network Interfaces | 1x 10/100 Ethernet port (for LAN), 1x for PC pass-through |
| Audio Codecs | G.711, G.729, G.722 |
| Maintenance | Clean with soft dry cloth; do not use harsh chemicals |
| Safety | Use only approved power supply; do not expose to moisture |
| Spare Parts Availability | Contact Alcatel support for replacement parts |
| Warranty | Standard 1-year manufacturer warranty |
Frequently Asked Questions - Temporis 200 IP ALCATEL
How do I connect the Alcatel Temporis 200 IP phone?
Connect the Ethernet cable from your router or switch to the LAN port on the phone. If using PoE, power is supplied through the cable; otherwise, connect the AC adapter. Then plug in the handset.
How can I configure the IP settings?
Press the menu key, navigate to Network Settings, and choose DHCP or static IP. Enter the required parameters (IP, subnet, gateway) using the keypad.
Why is my phone not registering with the SIP server?
Check that the Ethernet cable is properly connected and the phone has obtained an IP address. Verify the SIP server address, username, and password in the account settings. Ensure the server is reachable.
How do I make a conference call?
During an active call, press the Conference key (or menu option). Dial the second party and wait for answer, then press Conference again to join all parties.
Can I use a headset with this phone?
Yes, the phone has a headset port (RJ9) on the side. You can connect a wired headset and use the headset key to switch between handset and headset.
How do I adjust the ringer volume?
While the phone is idle, press the Volume Up/Down buttons on the side to adjust the ringer volume. The current level will be displayed.
What should I do if the display is blank?
Ensure the phone is receiving power. Check the PoE connection or AC adapter. If still blank, try a factory reset by holding down the 'OK' and 'Cancel' keys for 10 seconds.
How do I transfer a call?
During a call, press the Transfer key. Dial the extension or number, wait for the answer, then press Transfer again to complete the transfer. For blind transfer, press Transfer, dial, and hang up.
Can I set speed dial keys?
Yes, press Menu, then Features, then Speed Dial. Choose an unused line key, enter the number and label, and save. Then press that key to dial.
How do I perform a factory reset?
Press Menu, navigate to Settings, then Factory Reset. Confirm with OK. Alternatively, hold down the 'OK' and 'Cancel' keys simultaneously for 10 seconds until the phone reboots.
User questions about Temporis 200 IP ALCATEL
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Phone in PDF format for free! Find your manual Temporis 200 IP - ALCATEL and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Temporis 200 IP by ALCATEL.