PGWX-61B - Video projector Barco - Free user manual and instructions
Find the device manual for free PGWX-61B Barco in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Video Projector |
| Model | PGWX-61B |
| Brand | Barco |
| Display Technology | DLP |
| Resolution | WXGA (1280 x 800) |
| Brightness | 6000 ANSI Lumens (estimated) |
| Contrast Ratio | 2000:1 (typical) |
| Light Source | Lamp |
| Lens | Interchangeable, optional |
| Dimensions (W x D x H) | Approx. 475 x 400 x 170 mm |
| Weight | Approx. 10 kg |
| Power Consumption | 500 W (typical) |
| Power Supply | AC 100-240 V, 50/60 Hz |
| Inputs | HDMI, VGA, Composite, S-Video, Audio |
| Outputs | Monitor out, Audio out |
| Control Interfaces | RS-232, IR, Wired remote |
| Keystone Correction | Vertical and Horizontal |
| Lens Shift | Yes, motorized |
| 3D Support | Yes, DLP-Link |
| Noise Level | 35 dB (typical) |
| Operating Temperature | 0°C to 40°C |
| Maintenance | Clean air filters regularly; replace lamp when needed |
| Safety Features | Overheat protection, lens cap |
| Spare Parts Availability | Replacement lamps, filters, and optional lenses |
| Repairability | Moderate; professional service recommended |
Frequently Asked Questions - PGWX-61B Barco
What is the native resolution of the Barco PGWX-61B?
The native resolution is WXGA (1280 x 800), suitable for widescreen presentations.
How do I replace the lamp?
Turn off the projector and unplug it. Allow it to cool. Open the lamp cover, remove the old lamp, and insert a new Barco-approved lamp. Do not touch the glass bulb.
Can I connect a laptop to this projector?
Yes, use an HDMI or VGA cable. Select the corresponding input source via the remote or menu.
How do I clean the air filters?
Remove the filter cover, take out the foam filter, and wash it with mild soap and water. Let it dry completely before reinstalling.
Why is the projector not turning on?
Check that the power cord is securely connected and the power outlet is working. Ensure the lamp cover is properly closed. If the LED is blinking, refer to the manual for error codes.
Does the projector support 3D content?
Yes, it supports DLP-Link 3D. You need 3D glasses compatible with DLP-Link and a 3D source.
How do I adjust the image size and focus?
Use the zoom ring on the lens to adjust image size and the focus ring to sharpen the image. For keystone correction, use the menu or remote.
What is the recommended lamp replacement interval?
The lamp life is approximately 2000-3000 hours in normal mode, and up to 4000 hours in eco mode. Replace when the image becomes dim.
Can I mount this projector on the ceiling?
Yes, use a compatible ceiling mount with proper weight capacity. Ensure the mount is securely attached to a ceiling beam.
How do I reset the lamp timer?
After replacing the lamp, go to the Setup menu, select 'Lamp Hours', and choose 'Reset'. Confirm the action.
User questions about PGWX-61B Barco
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Video projector in PDF format for free! Find your manual PGWX-61B - Barco and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. PGWX-61B by Barco.