9001 - Digital decoder SPC - Free user manual and instructions

Product Type	Digital Decoder (Set-Top Box)
Brand	SPC
Model	9001
Dimensions (approx.)	150 x 100 x 30 mm
Weight (approx.)	0.3 kg
Power Supply	DC 5V 1A (via included adapter)
Power Consumption	< 5W (standby < 1W)
Video Output	HDMI (HDCP), Composite AV (optional)
Video Resolution	Up to 1080p Full HD
Audio Output	HDMI, Optical S/PDIF (optional), Stereo RCA
Input Connector	F-type for antenna/cable
USB Port	1 x USB 2.0 (for media playback or firmware update)
Supported Tuners	DVB-T2/C (depending on region)
Main Functions	Digital TV reception, Electronic Program Guide (EPG), parent control, teletext, subtitle support, media playback via USB
Remote Control	Infrared, included with batteries
Operating Temperature	0°C to 40°C
Storage Temperature	-10°C to 50°C
Maintenance	Clean with dry cloth; do not use liquids or solvents
Safety	Keep away from moisture, heat sources; unplug during storms
Spare Parts & Repairability	Remote control and power adapter available; device not user-serviceable
General Information	For indoor use only; manual available in PDF

Frequently Asked Questions - 9001 SPC

How do I connect my SPC 9001 digital decoder to my TV?

Connect the HDMI cable from the decoder's HDMI output to your TV's HDMI input. Alternatively, use the composite AV cable (yellow/red/white) if your TV lacks HDMI. Then connect the antenna cable to the decoder's RF input.

How do I scan for channels on the SPC 9001?

Go to the Menu > Installation (or Setup) > Auto Scan. Select your region and start scanning. The decoder will find all available digital channels automatically.

Why is my remote control not working?

First, check the batteries and replace them if necessary. Ensure there are no obstacles between the remote and the decoder. Try pointing directly at the IR receiver. If still not working, reset the decoder by unplugging for 30 seconds.

Can I record TV shows with this decoder?

The SPC 9001 does not have a built-in recording function. However, you can connect a USB drive (FAT32 format) to pause live TV or record if the model supports it. Check the manual for compatibility.

How do I update the firmware?

Download the latest firmware from the official SPC website, copy it to a USB drive (FAT32), insert into the decoder's USB port, then go to Menu > System > Software Update and follow on-screen instructions.

What should I do if the decoder displays 'No Signal'?

Check the antenna connection and ensure it is securely plugged. Verify that you have selected the correct input source on your TV. Run a channel scan again. If using a cable connection, contact your provider.

Is the SPC 9001 compatible with Wi-Fi?

No, the SPC 9001 does not have built-in Wi-Fi. It relies on a wired antenna or cable connection for TV reception.

How do I perform a factory reset?

Go to Menu > System > Factory Reset (or Default Settings). Enter the default PIN (usually 0000 or 1234) and confirm. This will erase all personal settings and channels.

What types of media files can I play via USB?

The decoder supports common formats such as MP4, AVI, MKV, JPG, MP3. For a full list, refer to the manual. Files must be stored on a USB drive formatted as FAT32.

How can I get the user manual for the SPC 9001?

The manual is available for free download in PDF format at notice-facile.com. You can also request a translated version by email from the product page.

USER MANUAL 9001 SPC