FWR-734N - Router Phicomm - Free user manual and instructions
Find the device manual for free FWR-734N Phicomm in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Router |
| Brand | Phicomm |
| Model | FWR-734N |
| Wireless Standards | IEEE 802.11b/g/n |
| Frequency Band | 2.4 GHz |
| Maximum Wireless Data Rate | 150 Mbps |
| Ethernet Ports | 4 x 10/100 Mbps LAN, 1 x 10/100 Mbps WAN |
| Antenna | 1 x external fixed antenna |
| Power Supply | 9V DC, 0.6A |
| Dimensions (approx.) | 150 x 100 x 30 mm |
| Weight | 0.2 kg |
| Security | WEP, WPA, WPA2 |
| Management | Web-based GUI |
| DHCP Server | Yes |
| NAT | Yes |
| Firewall | SPI Firewall |
| VPN Pass-through | Yes |
| LED Indicators | Power, WAN, LAN, WLAN |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Cleaning | Wipe with dry cloth; avoid liquids |
| Spare Parts | Power adapter available; antennas if applicable |
Frequently Asked Questions - FWR-734N Phicomm
How do I reset the Phicomm FWR-734N router to factory defaults?
Press and hold the Reset button on the back panel for about 10 seconds using a paperclip until the power LED blinks. Release the button; the router will reboot with default settings.
What is the default IP address and login for the FWR-734N?
The default IP address is 192.168.1.1. The default username is admin and password is admin (or blank). These are printed on the router label.
How can I change the Wi-Fi password on my Phicomm FWR-734N?
Log into the web interface at 192.168.1.1. Go to Wireless > Security. Enter a new passphrase in the WPA Passphrase field and click Save.
How do I update the firmware on the FWR-734N?
Download the latest firmware from the Phicomm support site. Log into the router, go to System Tools > Firmware Upgrade, select the file, and click Upgrade. Do not power off during upgrade.
Why is my internet connection not working after setting up the router?
Check that the WAN port is connected to your modem. Verify your internet settings (PPPoE, DHCP, etc.) via Network > WAN. Reboot both modem and router.
Can I use the FWR-734N as a wireless repeater?
Yes, the router supports WDS bridging. Configure in Wireless > WDS Settings. Ensure the router's IP is on the same subnet as the main router.
How many devices can connect to the FWR-734N simultaneously?
The router supports approximately 10-15 simultaneous wireless connections depending on usage and signal strength.
What should I do if I forgot my router login password?
Perform a hard reset by holding the Reset button for 10 seconds. This restores the default admin/admin credentials. Note that all settings will be lost.
Is the Phicomm FWR-734N compatible with IPv6?
The router supports IPv6 (tunnel mode or static). Configure it under Network > IPv6. Check with your ISP for required settings.
How can I improve the wireless range of my FWR-734N?
Place the router in a central, elevated location away from obstacles. Change the wireless channel to a less congested one (e.g., 1, 6, or 11) and ensure antennas are fully extended.
User questions about FWR-734N Phicomm
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Router in PDF format for free! Find your manual FWR-734N - Phicomm and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FWR-734N by Phicomm.